Abstract

Three-dimensional (3D) engineered tissue constructs are a novel and promising approach to tissue repair and regeneration. 3D tissue constructs have the ability to restore form and function to damaged soft tissue unlike previous methods, such as plastic surgery, which are able to restore only form, leaving the function of the soft tissue often compromised. In this study, we seeded murine myoblasts (C2C12) into a collagen composite scaffold and cultured the scaffold in a roller bottle cell culture system in order to create a 3D tissue graft in vitro. The 3D graft created in vitro was then utilized to investigate muscle tissue repair in vivo. The 3D muscle grafts were implanted into defect sites created in the skeletal muscles in mice. We detected that the scaffolds degraded slowly over time, and muscle healing was improved which was shown by an increased quantity of innervated and vascularized regenerated muscle fibers. Our results suggest that the collagen composite scaffold seeded with myoblasts can create a 3D muscle graft in vitro that can be employed for defect muscle tissue repair in vivo.

1. Introduction

Tissue loss usually results in significant dysfunction, physical deformities, and emotional pain long after treatment. Common causes of tissue loss include military injuries, such as high-velocity missiles, fragmenting exploding devices, and penetrating wounds associated with gunshots, and civilian injuries, such as blunt trauma attributed to automobile accidents [1]. Other causes of soft tissue removal include tumor removal, diabetic tissue damage, and irradiative injuries [25]. Current treatments of soft tissue injuries, such as skeletal muscle defects, resort to reconstructive plastic surgery, and skin grafting which are effective techniques to be employed in emergency repair and cosmetic applications, but often these techniques are unable to provide restoration of the function to the damaged tissue [6, 7].

Recent advances in biotechnology and bioengineering have offered novel approaches to repairing soft tissue defects by combining cell biology, gene transfer, biomaterials, and bioreactors [812]. Among the new advances, three-dimensional biodegradable scaffolds provide the ability to restore form and also function to the injured area. In order to be successful, the 3D biodegradable scaffold needs to serve two purposes. First, the scaffold needs to have the physiologic and mechanical properties that mimic the in vivo native environment, and second, the scaffold needs to have the ability to allow for development and remodeling of the tissue in order to promote successful restoration of physiological function [1315]. It is important for the scaffold to be biodegradable because nondegradable constructs implanted for prolonged time periods often induce an inflammatory response which can often compromise the tissue construct and the healing of the tissue [1618].

Tissue and organ function are dependent on the presence of appropriate populations of differentiated cells, and therefore, it is important to incorporate proper cells in the 3D scaffold. This can be accomplished through rolling bottle cell culture systems which are advantageous, in comparison to static cell seeding, in that a rolling bottle cell culture system improves cell seeding density and homogeneity within the scaffold [10, 19, 20]. This is accomplished through the slow revolutions of the culture bottles on the rolling device which produce a force significant enough to permit the cells to grow evenly in three dimensions [21]. Also the revolutions allow for nutrients to be provided to the cells while at the same time removing waste products through the constant movement of media bathing the cells [22].

In general, the artificial 3D scaffold provides an architecture on which seeded cells can organize and develop into the desired tissue for implantation. Once implanted in the soft tissue defect, the biodegradable scaffold provides an initial biomechanical structure for the replacement tissue until the cells produce an adequate extracellular matrix. During the deposition, organization, and formation of the newly generated extracellular matrix, the scaffold is either degraded or metabolized; eventually leaving a vital organ or tissue that restores, maintains, or improves tissue function. In this study, we built a 3D muscle graft by seeding C2C12 myoblasts into a biodegradable 3D collagen composite scaffold, and implanted it into a skeletal muscle defect mouse model in vivo. Immunostaining was employed to evaluate the effectiveness of the graft in improving vascularization, innervation, and regeneration of the damaged tissue.

2. Materials and Methods

2.1. C2C12 Myoblasts Transfected with Retroviral LacZ and LacZ Staining

C2C12 myoblasts were purchased from ATCC (American Type Culture Collection) and cultured in media (DMEM, Invitrogen) supplemented with 10% fetal bovine serum (FBS, Gibco, BR), 10% horse serum (HS), 1% penicillin/streptomycin (P/S), and 0.5% chick embryo extract (CEE). The culture media was removed and replaced with a 1 : 1 dilution of retroviral LacZ and culture media supplemented with 8  g/mL of polybrene. The cells were incubated in the solution for 6 hours at 5% CO2 and 37°C. To ensure maximum transduction of the virus, the infection was done up to 3 times, and a LacZ staining was done after each infection to determine the efficiency of the infections. The LacZ staining consisted of fixing the cells in 1% glutaraldehyde solution (Sigma) for 2 minutes followed by washing with PBS. The cells were then incubated for 2 hours in a LacZ solution (225 mL PBS/25 mL KFE solution/250  L of 2 M MgCl2/5 mL of X-gal) at 37°C. The cells were then visualized for analysis using bright field microscopy.

2.2. 3D Collagen Composite Scaffold and Cell Seeding

The 3D collagen composite scaffolds were purchased from BD Biosciences, (catalogue number 354613) and the scaffolds are of a cylindrical shape approximately 4.2–5.2 mm in diameter and 3.9–4.5 mm in height with a volume of 0.039 cm3. The average pore size of the scaffold is 100–200 μm and the hydration capacity is 25  L. The weight and wet weight of the scaffolds are 3.5 mg and 45.0 mg, respectively, with an average wet tear strength of 0.48 ± 0.0131 lb/mm. The collagen composite scaffolds, derived from bovine hide, resemble the structure of collagen within the extracellular matrix, and are able to support both short- and long-term differentiation of multiple cell types. The 3D scaffolds were individually placed into separate wells of a 48-well plate, and were immersed in a solution consisting of 200  L of culture medium containing approximately 50,000 LacZ+ myoblasts. The scaffolds were then incubated in 37°C at 5% CO2 for 1 hour.

2.3. Rolling Bottle Cell Culture System

The LacZ+ myoblast seeded scaffolds were transferred from the 48-well plates into Corning cell culture bottles containing 200 mL of culture media. The Corning cell culture bottles were placed on a Wheaton rolling device (Fischer Scientific) at a speed of 5 revolutions per minute (RPM). The Wheaton rolling device was then placed in an incubator at 37°C and 5% CO2 for 3 weeks with periodic cell culture media changes.

2.4. Scaffold Sectioning and Immunostaining

In vitro, the scaffolds were harvested after 1, 2, and 3 weeks of culturing, and rinsed with PBS before being snap-frozen in 2-methyl butane precooled in liquid nitrogen and stored at −80°C. The scaffolds were then cryosectioned at 10 μm and prepared for immunostaining.

In vivo, scaffolds were harvested at various time points, and immunostaining was performed to detect CD31, vWF, dystrophin, neurofilament protein, and fast MyHC expression in injured GMs implanted with the myoblast seeded scaffolds. Tissue sections were fixed in 4% formalin for 5 minutes followed by washing with PBS. Nonspecific binding was blocked with 10% HS for 1 hour at room temperature (RT). Primary antibodies were diluted to 1 : 200 in 2% HS and incubated overnight at 4°C. The sections were then rinsed with PBS followed by secondary antibody incubation for 1 hour at RT in a 1 : 300 dilution. The sections were then rinsed with PBS before the nuclei were counterstained with DAPI.

2.5. Proliferation Assay

After 10 days of culturing the scaffolds in the Wheaton rolling device, a BrdU assay was performed in order to evaluate the proliferation capacity of the C2C12 myoblasts within the scaffold. BrdU was added to growth medium at dilution of 1 : 1000 for an incubation period of 24 hours. The scaffolds were then removed from the medium and rinsed with PBS before being snap-frozen in 2-methyl butane precooled in liquid nitrogen. The scaffolds were then sectioned and fixed with 4% formalin. The DNA was denatured for 10 min on ice with 1 N HCl followed by 2 N HCl at RT for 10 min, and finally 2 N HCl for 20 min at 37°C. Nonspecific binding was blocked with 10% HS for 1 hour. The primary antibody (biotin conjugated anti-BrdU) was added at a 1 : 250 dilution in 2% HS for 3 hours at RT. The secondary antibody (biotin streptavidin) was then added at a dilution of 1 : 400 for 1 hour at RT. The nuclei were then counterstained with DAPI.

2.6. Animal Experiments

The animal protocol was approved by the Animal Research and Care Committee at Children’s Hospital of Pittsburgh. The mice included normal (C57BL6J, 5–8 weeks of age, male), SCID (C57BL/6J-Prkdcscid/SzJ, 4–8 weeks of age, female), and dystrophic/immunodeficient mdx/SCID (C57BL/10ScSn-Dmdmdx crossed with C57BL/6J-Prkdcscid/SzJ, 4–8 weeks of age, female). All mice were purchased from Jackson Laboratory (Bar Harbor, Maine), and were housed individually with proper access to food and water and maintained on a 12-hour light/dark cycle. After the mice were anesthetized, an approximately  mm3 defect was created in the belly of the gastrocnemius muscle (GM). The 3D muscle grafts and control nonseeded scaffolds were implanted in the defects followed by immediate wound closure. At designed time periods, mice were sacrificed, and the GMs were harvested and snap-frozen in 2-methylbutane precooled in liquid nitrogen, and they were cryosectioned for histological analysis.

3. Results

3.1. In Vitro

In the in vitro portion of the experiments, the C2C12 myoblast seeded scaffolds were cultured in a roller bottle cell culture system, and the scaffolds were harvested after 1, 2, and 3 weeks of culturing. After 1 week of culture, myoblasts were distributed throughout the interior of the scaffold which provides evidence that extensive migration was able to occur (Figures  1(a)–1(f)). Some of the cells migrated into the interior region of the scaffold, and this can be detected by either HE (Figures  1(a)–1(c)) or LacZ (Figures  1(d)–1(f)) staining. The sectioned scaffolds were also immunostained for CD31, an endothelial marker, and vWF, an endothelial cell-specific protein (Figures 2(a)2(c)). After 1 week of culture, CD31positive cells were seen within the scaffold (red, Figure 2(a)). Colocalization between CD31-positive (red) and vWF-positive (green) cells was visualized after 2 weeks of culture (yellow, Figure 2(b)). The detection of the colocalization of CD31 positive and vWF positive cells is indicative of vascular development within the scaffold. After 3 weeks of culturing, more extensive colocalized positive cells were seen (yellow, Figure 2(c)). A BrdU assay was performed in order to assess the viability and proliferative capacity of the myoblasts within the scaffold. We detected myoblasts with nuclei positive for BrdU (red, Figures 2(d), 2(e), and 2(f)), revealing that some of the myoblasts seeded within the scaffold were able to proliferate.

3.2. In Vivo

In the normal mouse model, implantation of a nonseeded control scaffold resulted in rejection from the host tissue, and this was seen 20 days after implantation (Figure  3(a)). In the SCID mouse model, the implanted nonseeded scaffolds were not rejected by the host tissue, but few host cells migrated into the area of the implantation (Figure  3(b)). In the same SCID mouse model, implantation of the 3D muscle graft with LacZ-positive myoblasts for a duration of 20 days, resulted in detection of large populations of LacZ-positive cells remaining in the transplantation site as well as extensive migration of the LacZ-positive cells into the surrounding host tissue, which demonstrates the success of the 3D graft implantation into the host tissue (Figure  3(c)). With immunostaining, we discovered CD31 and vWF positive cells present within the interior of the scaffold, and some of these cells expressed colocalization of the two markers (Figure  3(d)), indicating that the vasculature process had began to develop.

In the mdx/SCID mouse model, we followed the same procedure described above for the normal mouse model. We observed that the trauma sites were quickly healed in the 3D muscle graft implanted skeletal muscle after 10 (Figure  4(a)) and 20 days (Figure  4(c)) after surgery in comparison to the healing seen in the nonseeded scaffolds implanted into the muscle (Figures  4(b) and 4(d)). By histological analysis, the LacZ-positive cells were able to survive within the implanted scaffold as well as migrate throughout the scaffold. The scaffold began to breakdown as it was incorporated within the surrounding host tissue 10 days after implantation (Figures  4(e) and 4(f)). Twenty days after the graft implantation, we also detected that multiple cell types were spread homogeneously throughout the site of injury, and significantly, we detected CD31 and vWF positive cells present in the new tissue and some of these cells demonstrated colocalization between these two markers (Figures  4(g) and 4(h)). This result indicates that the vascularization process had started within the 3D muscle graft as early as 10 days after implantation.

We also investigated the histology of the long-term 3D muscle graft after implantation in the mdx/SCID mouse model. One month after implantation of the 3D muscle graft, LacZ and eosin staining provided evidence that the LacZ-positive myoblasts were able to survive within the implanted scaffold (Figure  5(a)). The site of injury was composed of LacZ-positive myoblasts and nondegraded residues of the scaffold (Figure  5(a) and 5(c) arrows). Some LacZ-positive myoblasts were detected at the periphery of the scaffold forming LacZ positive multinucleated myotubes (Figure  5(a), arrowheads). Many desmin positive cells (arrowheads), indicative of mature muscle cells, were detected within the area of implantation around nondegraded regions of the scaffold (Figure  5(b), arrows). With an H&E staining, we detected newly formed myofibers within the region of the degrading scaffold (Figure  5(d)). With immunostaining, dystrophin-positive myofibers were detected within the implantation region which suggests that regeneration was occurring within the site of injury (Figure  5(e), arrowheads). We also discovered that some CD31 positive cells were located within the site of injury, revealing that the vascularization was an ongoing process (Figures  5(e) and 5(f), arrows).

Two months after implantation of the 3D muscle grafts, large dystrophin positive grafts were detected within the site of injury suggesting that muscle regeneration had taken place in many regions of the injured area (Figures  6(a) B, E, and H). Also, the majority of the dystrophin-positive grafts stained positive for fast myosin-heavy chain protein (Figures  6(a) G–I). Similar to the previous time points, CD31 was visualized which provides evidence for extensive vascular development within the site of injury (Figures  6(a) A–C). Also neurofilament protein was detected within the dystrophin-positive grafts suggesting that innervations were being formed to the regenerating myofibers (Figure 6(a) D–F). With histological analysis, we have detected a large area of scar tissue remaining in the implanted 3D graft sites three months after implantation through an H&E staining (Figure 6(b) A and B, stars). Also, we have detected regeneration ofmyofibers (Figure 6(b) B, arrows) and large amounts of dystrophin-positive myofibers within the new muscle graft (Figure 6(b) C and D, dystrophin-red, arrows) with revascularization (Figure 6(b) D, CD31-green, arrowheads). This existing scar tissue may be a major factor to interfere with further muscle functional recovery, and can be a potential inducer of muscle reinjury with movement. Thus, prevention of fibrosis is necessary for the success of the bioengineered tissue in application.

4. Discussion

In the last few decades, advances in bioengineering have moved the field of tissue engineering significantly forward [15, 23, 24]. While 3D tissue constructs are still being developed, this field continues to grow from the intense efforts of military and civilian trauma researchers. Tissue engineering techniques combined with cell biology and material sciences hold great promise in developing appropriate strategies for the repair and regeneration of biological tissues. The necessary components for successful 3D engineered tissues have been identified to include the following: a biodegradable material that serves as a scaffold to facilitate new tissue growth, and pluripotent or stem cells to initiate new tissue growth as well as promoting vascularization and innervation once implanted within the patient. Our work focused primarily on creating functional 3D tissue constructs in vitro, through the use of a 3D biodegradable scaffold seeded with C2C12 primary myoblasts, which could then be implanted in vivo for the purpose of repairing and replacing damaged and lost tissue due to soft tissue defects.

Our results confirmed that C2C12 myoblasts are able to survive and migrate within the 3D collagen composite scaffold in vitro. This is a necessary step to occur prior to implantation in order to ensure that the implanted scaffolds are incorporating a rich source of myoblasts into the area of the skeletal muscle injury. Also, we discovered that in vitro, CD31-positive cells were present after 1 week of culturing. CD31 is an endothelial marker that signifies progenitor blood vessel cells [25, 26] which means that the cell seeded scaffold had already started to develop some form of vasculature prior to implantation. This is furthered by evidence that after 2 weeks of culturing in vitro, colocalization between CD31- and vWF-positive cells was detected. These results indicate that the cell seeded scaffolds are capable of forming a type of prevascularization which is ideal for inducing vascular development within the defected muscle once implanted (Figure 7).

The ability to promote vascularization is an essential aspect of tissue engineering because often the vascularization to the area where the tissue loss took place is compromised by the trauma itself [4]. The vascularization that was seen in vitro was also present when the scaffolds were harvested at various time points after implantation in vivo. The detection of CD31-positive cells located throughout the scaffold provide evidence that vascularization was being incorporated within the scaffold from vessels located in the host tissue surrounding the defect. This incorporation of vasculature within the scaffold increased the cell survival of the myoblasts by providing nutrients and oxygen to the newly transplanted cells [27, 28]. In order for a tissue construct to be effective in becoming functional, vascularization needs to occur along with innervation. Techniques for repairing soft tissue defects, such as muscle and perforator flaps, result in providing vascularized coverage to the wound; however, due to the lack of innervations to the damaged area, sensitivity is often compromised [6]. Our results indicated that the seeded scaffold was successful in providing potential innervations to the damaged tissue based on the presence of neurofilament-positive cells. Neurofilament protein is a protein located in the intermediate filament of neurons [29]; therefore, its expression is indicative of neurogenesis and neural development.

Dystrophin-positive myofibers were found located within the area of the defect which signifies that new muscle fibers were being formed in the damaged area. The myoblasts that were seeded in the scaffold were able to successfully differentiate into myotubes which allowed for regeneration of the damaged tissue. This result is not surprising due to numerous previous studies that found that myoblast transplantation is an effective therapy for increasing dystrophin-positive myofibers in such muscle dystrophy diseases such as Duchenne muscular dystrophy [3032]. A large quantity of the dystrophin-positive myofibers stained positively for fast-type myosin-heavy chain protein, and a lower quantity staining positively for slow-type myosin-heavy chain protein. This preferential difference may be contributed to the environment into which the myoblasts were implanted [33]. If more fast-type myosin-heavy chain myofibers were present in the surrounding area of host tissue around the defect, differentiation of the myoblasts into myotubes exhibiting fast-type myosin-heavy chain proteins may have been favored.

Although many challenges still remain in the successful restoration of soft tissue defects, our study provides a starting point for overcoming these challenges. The ability of the myoblast seeded collagen composite scaffolds to provide the initial architecture for rebuilding a functional tissue, as well as incorporating an appropriate population of cells that helps to facilitate muscular regeneration through increasing innervation, vascularization, and the production of myofibers, makes the 3D collagen scaffold an ideal candidate for repairing soft tissue defects. However, immunocompatibility and fibrosis are two problems that still remain. As seen in our data, only immune-compromised mice were able to successfully integrate the 3D tissue graft into their host tissue which presents a limited scope of application for the scaffolds. Also, fibrosis is a pathological process that affects many tissues and organs after being afflicted by injuries or disease-like states [34]. The development of the fibrotic tissue can lead to chronic healing problems, which can result in tissue/organ dysfunction during the final healing stages, and can make the tissue more susceptible to reinjury after initial healing [35, 36]. Our study detected fibrosis formation in the skeletal muscles after long-term implantation, indicating that prevention or treatment of the fibrous scar tissue is essential for effective bioengineered tissues.

Author’s Contributions

J. Ma and K. Holden contributed equally to this paper.