Abstract
We report on the results of investigation of properties of ultrahard Ti–Si–N coatings deposited by pulsed high-current magnetron reactive sputtering (discharge pulse voltage is 300–900 V, discharge pulse current is up to 200 A, pulse duration is 10–100 μs, and pulse repetition rate is 20–2000 Hz). It is shown that for a short sputtering pulse (25 μs) and a high discharge current (160 A), the films exhibit high hardness (66 GPa), wear resistance, better adhesion, and a lower sliding friction coefficient. The reason is an enhancement of ion bombardment of the growing coating due to higher plasma density in the substrate region (1013 cm–3) and a manifold increase in the degree of ionization of the plasma with increasing peak discharge current (mainly due to the material being sputtered).
Similar content being viewed by others
References
S. Veprek, J. Vac. Sci. Technol. 17, 2401 (1999).
J. Musil, Surf. Coat. Technol. 125, 322 (2000).
J. Musil, Nanostructured Coatings Ed. by Albano Cavaleiro and Jeff Th. M. De Hosson (Springer, Berlin, 2006). pp. 407–463.
Veprek Stan, Veprek Heijman, and G. J. Maritza, Nanostructured Coatings, Ed. by Albano Cavaleiro and Jeff Th. M. De Hosso (Springer, Berlin, 2006). pp. 347–406.
J. W. Bradley, S. Thompson, and Y. Aranda Gonzalvo, Plasma Sources Sci. Technol. 10, 490 (2001).
C. Christou and Z. H. Barber, J. Vac. Sci. Technol. A 18, 2897 (2000).
J. Alami, J. T. Gudmundsson, J. Bohlmark, J. Birch, and U. Helmersson, Plasma Sources Sci. Technol. 14, 525 (2005).
J. Bohlmark, M. Lattemann, J. T. Gudmundsson, A. P. Ehiasarian, Y. Aranda Gonzalvo, N. Brenning, and U. Helmersson, Thin Solid Films 515, 1522 (2006).
William D. Sproul, J. Vac. Sci. Technol. A 21, S222 (2003).
A. N. Zaidel’, V. K. Prokof’ev, S. M. Raiskii, V. A. Slavnyi, and E. Ya. Shreider, Tables of Spectral Lines (Plenum, New-York, 1970).
Chen F. Fransis, Introduction to Plasma Physics (Springer, New York, 2012).
V. Kouznetsov, K. Macak, J. M. Schneider, U. Helmersson, and I. Petrov, Surf. Coat. Technol. 122, 290 (1999).
J. Alami, K. Sarakinos, G. Mark, and M. Wuttig, Appl. Phys. Lett. 89, 154104 (2006).
I. I. Aksenov and V. E. Strelnitskij, Surf. Coat. Technol. 47, 98 (1991).
A. Anders, Surf. Coat. Technol. 93, 157 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.V. Oskomov, A.N. Zakharov, S.V. Rabotkin, A.A. Solov’ev, 2016, published in Zhurnal Tekhnicheskoi Fiziki, 2016, Vol. 61, No. 2, pp. 59–64.
Rights and permissions
About this article
Cite this article
Oskomov, K.V., Zakharov, A.N., Rabotkin, S.V. et al. Deposition of ultrahard Ti–Si–N coatings by pulsed high-current reactive magnetron sputtering. Tech. Phys. 61, 215–220 (2016). https://doi.org/10.1134/S1063784216020171
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063784216020171