Abstract
The effect of the annealing temperature on the characteristics of hard elastic polypropylene samples obtained by annealing of extruded films and having an oriented lamellar structure is studied. It is established using the methods of X-ray scattering and differential scanning calorimetry that the lamellae thickness, the large period, and the degree of orientation of the folded lamellae increase with an increase in the annealing temperature, which is accompanied by an increase in the melting temperature and enthalpy. Porous films are obtained by uniaxial extension of the annealed samples in the orientation direction. It is shown that the porosity and permeability of the porous films increase with an increase in the annealing temperature, owing to an increase in the number and sizes of the through channels. The mechanical characteristics (strength, elastic modulus, and break elongation) of the hard elastic and porous films are measured, and their relationship with changes in the structure and orientation of the samples, depending on the annealing temperature, is established.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
L. Mandelkern, Crystallization of Polymers (Cambridge Univ. Press, Cambridge, 2004; Khimiya, Moscow, 1966).
Ph. H. Geil, Polymer Single Crystals (Wiley-Interscience, New York, 1963).
V. A. Marikhin and L. P. Myasnikova, Supramolecular Structure of Polymers (Khimiya, Leningrad, 1977) [in Russian].
S. Ya. Frenkel and G. K. Elyashevich, in Orientation Phenomena in Polymer Solutions and Melts (Khimiya, Moscow, 1980), p. 9 [in Russian].
V. A. Marikhin and L. P. Myasnikova, in Oriented Polymer Materials, Ed. by S. Fakirov (Huthig and Wepf, Heidelberg, 1996).
R. E. Kesting, Synthetic Polymer Membranes. A Structural Perspective, 2nd ed. (Wiley, New York, 1985).
M. Mulder, Basic Principles of Membrane Technology (Kluwer Academic, Dordrecht, 1991).
G. K. Elyashevich, E. Yu. Rozova, and E. A. Karpov, RF Patent No. 2140936 (1997).
A. L. Volynskii, A. Yu. Yarysheva, E. G. Rukhlya, L.M. Yarysheva, and N. F. Bakeev, Dokl. Phys. Chem. 454, 1 (2014).
E. A. Karpov, V. K. Lavrentyev, E. Yu. Rozova, and G. K. Elyashevich, Vysokomol. Soedin., Ser. A 37, 2035 (1995).
I. K. Park and H. D. Noether, Colloid Polym. Sci. 253, 824 (1975).
B. S. Spague, J. Macromol. Sci. Phys. 8, 157 (1973).
G. K. Elyashevich, E. Yu. Rozova, and E. A. Karpov, Vysokomol. Soedin., Ser. B 33, 723 (1991).
S. Hild, W. Gutmannsbauer, R. Luthi, J. Fuhrmann, and H.-J. Guntherotd, J. Polym. Sci. Polym. Phys. 34, 1953 (1996).
B. Wunderlich, Macromolecular Physics. Crystal Melting (Academic, New York, 1980), Vol.3.
G. K. Elyashevich, A. G. Kozlov, and E. Yu. Rozova, Polymer Sci., Ser. A 40, 567 (1998).
G. K. Elyashevich, I. S. Kuryndin, V. K. Lavrentyev, A. Yu. Bobrovskii, and V. Bukošek, Phys. Solid State 54, 1907 (2012).
I. S. Kuryndin, V. K. Lavrentyev, V. Bukošek, and G. K. Elyashevich, Polymer Sci., Ser. A 57, 717 (2015).
G. K. Elyashevich, D. V. Novikov, I. S. Kuryndin, A. Jelen, and V. Bukošek, Acta Chim. Sloven. 64, 980 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.K. Elyashevich, I.S. Kuryndin, V.K. Lavrentyev, E.N. Popova, V. Bukošek, 2018, published in Fizika Tverdogo Tela, 2018, Vol. 60, No. 10, pp. 1975–1981.
Rights and permissions
About this article
Cite this article
Elyashevich, G.K., Kuryndin, I.S., Lavrentyev, V.K. et al. Changes in the Structure and Mechanical Properties of Hard Elastic and Porous Polypropylene Films upon Annealing and Orientation. Phys. Solid State 60, 2019–2025 (2018). https://doi.org/10.1134/S1063783418100074
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063783418100074