Abstract
The regularities of the formation of the structure of silumin irradiated with a high-intensity electron beam in different modes are revealed using optical and scanning electron microscopy. The optimum irradiation mode that allows one to increase the fatigue life of this material by a factor of up to 3.5 is determined. The probable causes of the observed effect are investigated.
Similar content being viewed by others
References
G. B. Stroganov, V. A. Rotenberg, and G. B. Gershman, Aluminum–Silicon Alloys (Metallurgiya, Moscow, 1977) [in Russian].
A. V. Nikolaenko, Yu. G. Kalpin, T. S. Basyuk, et al., Izv. Tul. Univ., Tekh. Nauki, No. 3, 603 (2013).
G. P. Brekharya, V. V. Girzhon, and I. V. Tantsyura, Metallofiz. Noveish. Tekhnol. 29, 1243 (2007).
N. N. Koval and Yu. F. Ivanov, Russ. Phys. J. 51, 505 (2011).
V. Rotshtein, Yu. Ivanov, and A. Markov, Surface Treat-ment of Materials with Low-Energy, High-Current Elec-tron Beams (Elsevier, London, 2006), Chap. 6, p. 205.
Yu. F. Ivanov, V. E. Gromov, S. V. Vorob’ev, et al., Fiz. Mezomekh. 14 (6), 111 (2011).
D. A. Bessonov, S. V. Vorob’ev, V. E. Gromov, et al., Nanoinzhener, No. 3, 20 (2013).
V. E. Gromov, Yu. F. Ivanov, V. V. Sizov, S. V. Vorob’ev, and S. V. Konovalov, J. Surf. Invest.: X-ray, Synchrotron Neutron Tech. 7, 94 (2013).
Yu. F. Ivanov, V. E. Gromov, V. V. Sizov, et al., Fiz. Mezomekh. 16 (1), 85 (2013).
V. E. Gromov, Yu. F. Ivanov, V. A. Grishunin, et al., Usp. Fiz. Met. 14 (1), 67 (2013).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ivanov, Y.F., Alsaraeva, K.V., Gromov, V.E. et al. Fatigue life of silumin treated with a high-intensity pulsed electron beam. J. Surf. Investig. 9, 1056–1059 (2015). https://doi.org/10.1134/S1027451015050328
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1027451015050328