Abstract
The technique of explosive powder compaction is used to prepare W-Cu nanocomposites. The nanocrystalline W-Cu powders are produced by mechanical alloying and then analyzed by x-ray diffraction. The compacted specimens are found to have the largest density when the detonation velocity is 5300 m/s. The composition and distribution of the elements in the compacted specimens are uniform and have a Vickers hardness equal to 320 and a density equal to 99.1% of the theoretical density.
Similar content being viewed by others
References
U. Tilliander, H. Bergqvist, and S. Seetharaman, “Morphology Studies of a W-Cu Alloy Synthesized by Hydrogen Rreduction,” J. Mater Res. 21(6), 1467–1475 (2006).
J. Cheng, C. Lei, E. Xiong, et al., “Preparation and Characterization of W-Cu Nanopowders by a Homogeneous Precipitation Process,” J. Alloys Comp. 421, 146–150 (2006).
C. C. Koch, Nanostructured Materials (North Carolina, North Carolina State University Raleigh, 2002).
W. J. Huppmann and H. Rigger, “Modeling of Rearrangement Process in Liquid Phase Sintering,” Acta Metall. 23, 965 (1975).
J. C. Kim, S. S. Ryu, Y. D. Kim, and I. H. Moon, “Densification Behavior of Mechanically AlloyedW-Cu Composite Powders by the Double Rearrangement Process,” Scripta Mater. 39, 669–676 (1998).
A. G. Mamalis, I. N. Vottea, and D. E. Manolakos, “On the Modelling of the Compaction Mechanism of Shock Compacted Powders,” J. Mater. Process. Technol. 108, 165–178 (2001).
D. G. Morris, “Bonding Processes during the Dynamic Compaction of Metallic Powders,” Mater. Sci. Eng. A-Struct. 57, 187–195 (1983).
B. H. Shao, J. X. Gao, and G. H. Li, “The Mechanism of Energy Deposition at the Interface of Metal Powder in Explosive Consolidation,” Explosion Shock Waves 9, 17–27 (1989).
Q. Wei, T. Jiao, K. T. Ramesh, and E. Ma, “Nano-Structured Vanadium: Processing and Mechanical Properties under Quasi-Static and Dynamic Compression,” Scripta Mater. 50(3), 359–364 (2004).
T. Chen, J. M. Hampikian, and N. N. Thadhani, “Synthesis and Characterization of Mechanically Alloyed and Shock-Consolidated Nanocrystalline NiAl Inter-Metallic,” Acta Mater. 47(8), 2567–2579 (1999).
Z. Q. Jin, K. N. Chen., J. Li, et al., “Shock Compression Response of Magnetic Nanocomposite Powders,” Acta Mater. 52, 2147–2154 (2004).
G. E. Korth and R. L. Williamson, “Dynamic Consolidation of Metastable Nanocrystalline Powders,” Metallurg. Mater. Trans. A 26, 2571–2578 (1995).
C. P. Dogan, J. C. Rawers, R. D. Govier, and G. Korth, “Mechanical Processing, Compaction, and Thermal Processing of α-Fe Powder,” Nanostruct. Mater. 4(6), 631–644 (1994).
R. Prummer, in Proc. of the 4th Int. Conf. on Center for High Energy Forming, Colorado, USA, 1973, pp. 9.2.1–9.2.27.
I. Plaksin, J. Campos, J. Ribeiro, et al., “Novelties in Physics of Explosive Welding and Powder Compaction,” J. Phys. IV 110, 797–802 (2003).
C. L. Hoening and C. S. Yust, “Explosive Compaction of AlN, Amorphous Si3N4, Boron and Al2O3 Ceramics [J],” Ceram. Bull. 60(11), 1175–1224 (1981).
Y. Huang, W. Chen, and D. Tang, “Study on Microstructure and Properties of CuW70 Alloy under Dynamic and Static Deformation,” Heat Treatment Metals 32, 258–262 (2007).
W. Chen and R. Liu, “Comparison Analysis of Microstructures and Properties ofW/Cu andMo/Cu Composites,” Electr. Eng. Alloy 4, 3–5 (2001).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Fizika Goreniya i Vzryva, Vol. 48, No. 2, pp. 134–139, March–April, 2012.
Rights and permissions
About this article
Cite this article
Wang, Z.L., Li, X., Yan, H. et al. Investigation on explosive compaction of W-Cu nanocomposite powders. Combust Explos Shock Waves 48, 245–249 (2012). https://doi.org/10.1134/S0010508212020141
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0010508212020141