Paper
20 September 1989 Wavefront Detector Optimization For Laser Guided Adaptive Telescopes
Timothy J. Kane, Byron M. Welsh, Chester S. Gardner, Laird A. Thompson
Author Affiliations +
Abstract
Accurate measurement of the wavefront perturbations caused by atmospheric turbulence is vital to the operation of an adaptive optics system. Current systems typically use a Hartmann-Shack wavefront sensor to perform this measurement. This type of sensor uses a lens to translate the problem of phase tilt detection to one of spot centroid detection at the lens focal plane. The accuracy with which a CCD array in the focal plane measures the centroid of this spot is analyzed, taking into account the finite pixel dimension, pixel quantity and dead space between pixels. The optimum design of the wavefront sensor is discussed and the required flux from the reference source is computed. If we require the corrected telescope to have a Strehl ratio of 0.85, and assume typical values for the detector parameters, then the required return flux per seeing cell of size ro is approximately 115 photocounts per measurement.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Timothy J. Kane, Byron M. Welsh, Chester S. Gardner, and Laird A. Thompson "Wavefront Detector Optimization For Laser Guided Adaptive Telescopes", Proc. SPIE 1114, Active Telescope Systems, (20 September 1989); https://doi.org/10.1117/12.960821
Lens.org Logo
CITATIONS
Cited by 21 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Telescopes

Sensors

Wavefronts

Wavefront sensors

Space telescopes

Atmospheric turbulence

RELATED CONTENT


Back to Top