Paper
9 September 2006 Asymmetric dual paraboloid reflector: improving system throughput by narrowing cone angles
Author Affiliations +
Abstract
Wavien patented dual paraboloid reflector (DPR) system, while optimal in maximizing image brightness (equivalent to minimizing the image aberration) at the input of its light pipe, does not produce maximal lumen throughput at its output. The overall lumen throughput depends in large part on three factors: Fresnel losses and image aberration, both defined at the input face of the light pipe, and the light pipe's input dimensions. Fresnel losses can be reduced by narrowing the cone angles of the light cone incident on the light pipe, which in turn can be achieved by increasing the size and/or focal length of the second paraboloid reflector. Smaller cone angles also mean reduced tapering of the light pipe which translates into larger input sizes (as its output dimensions are fixed) and higher coupling efficiency. Unfortunately this gain in coupling efficiency comes at the expense of breaking the system symmetry, which destroys 1:1 imaging and leads to increased aberration and reduced brightness. Using a ray-tracing software an optimal point of operation can be reached and it is found that at least 10% increase in lumen throughput over the symmetric DPR system is achievable.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George Ouyang and Kenneth Li "Asymmetric dual paraboloid reflector: improving system throughput by narrowing cone angles", Proc. SPIE 6338, Nonimaging Optics and Efficient Illumination Systems III, 63380E (9 September 2006); https://doi.org/10.1117/12.692863
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectors

Imaging systems

Lamps

Collimation

Patents

Retroreflectors

Lithium

Back to Top