A two-dimensional semiconducting bolometer array for HAWC

George M. Voellmer; Christine A. Allen; Sachidananda R. Babu; Arlin E. Bartels; Charles Darren Dowell; Jessie L. Dotson; Doyle A. Harper; S. Harvey Moseley Jr.; Timothy Rennick; Peter J. Shirron; W. Wayne Smith; Edward J. Wollack

doi:10.1117/12.552016

8 October 2004 A two-dimensional semiconducting bolometer array for HAWC

George M. Voellmer, Christine A. Allen, Sachidananda R. Babu, Arlin E. Bartels, Charles Darren Dowell, Jessie L. Dotson, Doyle A. Harper, S. Harvey Moseley Jr., Timothy Rennick, Peter J. Shirron, W. Wayne Smith, Edward J. Wollack

Author Affiliations +

Proceedings Volume 5498, Millimeter and Submillimeter Detectors for Astronomy II; (2004) https://doi.org/10.1117/12.552016
Event: SPIE Astronomical Telescopes + Instrumentation, 2004, Glasgow, United Kingdom

Abstract

The Stratospheric Observatory For Infrared Astronomy's (SOFIA's) High resolution Airborne Wideband Camera (HAWC) will use an ion-implanted silicon bolometer array developed at NASA's Goddard Space Flight Center (GSFC). The GSFC Pop-Up Detectors (PUDs) use a unique "folding" technique to enable a 12 x 32 element close-packed array of bolometers with a filling factor greater than 95%. The HAWC detector uses a resistive metal film on silicon to provide frequency independent, ~50% absorption over the 40 - 300 micron band. The silicon bolometers are manufactured in 32-element rows within silicon frames using Micro Electro Mechanical Systems (MEMS) silicon etching techniques. The frames are then cut, "folded", and glued onto a metallized, ceramic, thermal bus "bar". Optical alignment using micrometer jigs ensures their uniformity and correct placement. The rows are then stacked side-by-side to create the final 12 x 32 element array. A kinematic Kevlar suspension system isolates the 200 mK bolometer cold stage from the rest of the 4K detector housing. GSFC - developed silicon bridge chips make electrical connection to the bolometers, while maintaining thermal isolation. The Junction Field Effect Transistor (JFET) preamplifiers for all the signal channels operate at 120 K, yet they are electrically connected and located in close proximity to the bolometers. The JFET module design provides sufficient thermal isolation and heat sinking for these, so that their heat is not detected by the bolometers. Preliminary engineering results from the flight detector dark test run are expected to be available in July 2004. This paper describes the array assembly and mechanical and thermal design of the HAWC detector and the JFET module.

Citation Download Citation

George M. Voellmer, Christine A. Allen, Sachidananda R. Babu, Arlin E. Bartels, Charles Darren Dowell, Jessie L. Dotson, Doyle A. Harper, S. Harvey Moseley Jr., Timothy Rennick, Peter J. Shirron, W. Wayne Smith, and Edward J. Wollack "A two-dimensional semiconducting bolometer array for HAWC", Proc. SPIE 5498, Millimeter and Submillimeter Detectors for Astronomy II, (8 October 2004); https://doi.org/10.1117/12.552016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available