Poster + Paper
13 December 2020 MVIC flight and flight spare sensor calibration
Todd J. Veach, Amanda J. Bayless, Peter W. Roming, Andrew Peterson, Thomas Lechner
Author Affiliations +
Conference Poster
Abstract
The Multi-spectral Visible Imaging Camera (MVIC) detector is a time-delay and integration (TDI) CCD with 4, 8, 16, 32, and 64 TDI modes. MVIC is scheduled to fly as part of the instrument suite on the Lucy mission to the Trojans launching in 2021. We present here the pre-delivery SwRI Detector Characterization Lab (SDCL) data of the Flight (FM) and Flight Spare (FS) from 370 to 925nm. The MVIC sensor consists of six broad-band top-hat filters on a single sapphire substrate developed by VIAVI Solutions and six CCDs on a single wafer developed by Semiconductor Technology Associates (STA). We have calibrated both the FS and FM for read noise, dark current, linearity, quantum efficiency, and total system throughput. The data were collected using standard Photon Transfer Curve techniques at strategically chosen wavelengths corresponding to center and edge of the bandpass filters. Each system was also calibrated for spuriously operational pixels and cosmetic defects. The pixel response function is mapped on a pixel-by-pixel basis for the 64 TDI mode.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Todd J. Veach, Amanda J. Bayless, Peter W. Roming, Andrew Peterson, and Thomas Lechner "MVIC flight and flight spare sensor calibration", Proc. SPIE 11443, Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave, 114435M (13 December 2020); https://doi.org/10.1117/12.2561759
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

CCD image sensors

Fermium

Frequency modulation

Semiconducting wafers

Cameras

RELATED CONTENT

Empirical formula for rates of hot pixel defects based on...
Proceedings of SPIE (February 19 2013)
Projecting the rate of in field pixel defects based on...
Proceedings of SPIE (February 15 2012)
Tradeoffs in imager design parameters for sensor reliability
Proceedings of SPIE (February 16 2011)
Configuration design for sensor integration
Proceedings of SPIE (September 13 1995)

Back to Top