To read this content please select one of the options below:

Preparation and characterization of in situ electrospun ZnS nanoparticles/PPV nanofibers

Yi Xin (College of Instrumentation & Electrical Engineering, Jilin University, Changchun , P.R. China)
Zijiang Jiang (Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, P.R. China)
Wenwen Li (Department of Chemistry, Northeast Normal University, Changchun P.R. China)
Zonghao Huang (Department of Chemistry, Northeast Normal University, Changchun, P.R. China)
Cheng Wang (Key Laboratory of Functional Inorganic Material Chemistry, Heilongjiang University, P.R. China)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 2 March 2015

213

Abstract

Purpose

This paper aimed to prepare a kind of ZnS nanoparticles/poly(phenylene vinylene) (PPV) nanofibre and investigate its properties. Because the ZnS nanoparticles are important optoelectronic materials, their incorporation into one-dimensional (1D) nanoscale polymer matrices should be a meaningful subject for electrospinning.

Design/methodology/approach

ZnS/PPV composite nanofibres with an average diameter of 600 nm were successfully prepared by a combination of the in situ method and electrospinning technique. The nanofibres were electrospun from Zn(CH3COO)2·2H2O and PPV precursor composite solution, and the ZnS/PPV fibres were obtained by exposure of the electrospun fibres to H2S gas to prepare ZnS nanoparticles in situ. Such fibres were characterised using X-ray Diffraction (XRD), Fourier transform infrared, transmission electron microscope (TEM), scanning electron microscope and photoluminescence (PL). The photoelectric properties of the fibres obtained were also investigated.

Findings

XRD patterns proved that ZnS nanocrystals generated in the composite nanofibres. The TEM image showed that the nanocrystals were homogeneously dispersed in the nanofibres. The PL spectrum of ZnS/PPV composite nanofibres exhibited a blue shift relative to the PPV nanofibres. I-V curve of the single nanofibre device under 5.76 mW/cm2 light illumination showed that the composite nanofibres have good photoelectric properties.

Research limitations/implications

The comparisons of advantages between ZnS/PPV nanofibres with similar nanofibres will be further expanded in a later research.

Practical implications

Results demonstrate the promise of these novel nanostructures as ultraminiature photodetectors with the potential for integration into future hybrid nanophotonic devices and systems.

Originality/value

The integration of inorganic semiconductor nanoparticles into organic conjugated polymers leads to composite materials with unique physical properties and important application potential. In this work, ZnS nanoparticles were introduced into PPV by an in situ method, so as to obtain a kind of novel 1D nanomaterials with good photoelectric properties.

Keywords

Acknowledgements

The authors thank Professor Wenping Hu and Dr Yajie Zhang of Beijing National Laboratory (Molecular Sciences and Key Laboratory of Organic Solids) for fabrication of Au top-electrode device and the measurement of I-V curves. The research is supported by the National Natural Science Foundation of China (51303062, 20774017, 51273056, 21202091 and 51210105021), CPDF (201104456, LBH-Q12021), HLJNSF of Heilongjiang (E201118, E201144), Innovation Fellowship Foundation of Heilongjiang University (Hdtd 2010-11) and Analysis and Testing Foundation of Northeast Normal University.

Citation

Xin, Y., Jiang, Z., Li, W., Huang, Z. and Wang, C. (2015), "Preparation and characterization of in situ electrospun ZnS nanoparticles/PPV nanofibers", Pigment & Resin Technology, Vol. 44 No. 2, pp. 74-78. https://doi.org/10.1108/PRT-09-2013-0084

Publisher

:

Emerald Group Publishing Limited

Copyright © 2015, Emerald Group Publishing Limited

Related articles