To read this content please select one of the options below:

Mixed two- and four-level experimental designs for interchangeable parts with different degrees of assembly difficulty

Carla A. Vivacqua (Universidade Federal do Rio Grande do Norte, Natal, Brazil)
Linda Lee Ho (Universidade de Sao Paulo, Sao Paulo, Brazil)
André L.S. Pinho (Universidade Federal do Rio Grande do Norte, Natal, Brazil)

International Journal of Quality & Reliability Management

ISSN: 0265-671X

Article publication date: 4 September 2017

187

Abstract

Purpose

The purpose of this paper is to show how to properly use the method of replacement to construct mixed two- and four-level minimum setup split-plot type designs to accommodate the presence of hard-to-assemble parts.

Design/methodology/approach

Split-plot type designs are economical approaches in industrial experimentation. These types of designs are particularly useful for situations involving interchangeable parts with different degrees of assembly difficulties. Methodologies for designing and analyzing such experiments have advanced lately, especially for two-level designs. Practical needs may require the inclusion of factors with more than two levels. Here, the authors consider an experiment to improve the performance of a Baja car including two- and four-level factors.

Findings

The authors find that the direct use of the existing minimum setup maximum aberration (MSMA) catalogs for two-level split-plot type designs may lead to inappropriate designs (e.g. low resolution). The existing method of replacement for searching exclusive sets of the form (α, β, αβ) available in the literature is suitable for completely randomized designs, but it may not provide efficient plans for designs with restricted randomization.

Originality/value

The authors provide a general framework for the practitioners and have extended the algorithm to find out the number of generators and the number of base factor at each stratum, which guide the selection of mixed two-level and four-level MSMA split-plot type designs.

Keywords

Acknowledgements

The authors would like to thank CNP-q (Brazil) for the financial support.

Citation

Vivacqua, C.A., Ho, L.L. and Pinho, A.L.S. (2017), "Mixed two- and four-level experimental designs for interchangeable parts with different degrees of assembly difficulty", International Journal of Quality & Reliability Management, Vol. 34 No. 8, pp. 1152-1166. https://doi.org/10.1108/IJQRM-01-2016-0006

Publisher

:

Emerald Publishing Limited

Copyright © 2017, Emerald Publishing Limited

Related articles