To read this content please select one of the options below:

Effect of slot depth on the permeance of aligned teeth in a doubly‐salient rectilinear toothed structure

Jawad Faiz (Department of Electrical and Computer Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran)
John W. Finch (Department of Electrical and Electronic Engineering, Newcastle University, Newcastle upon Tyne, UK)

Abstract

Effect of slot depth on the evaluation of permeance in the aligned position for identically slotted rectilinear tooth geometry can be carried out using conformal transformations. Consequent increase of permeance is related to the airgap proportion ratios; tooth‐width to tooth‐pitch, t/λ; tooth‐pitch to airgap dimension, λ/g; and slot‐depth to slot‐d/s; through two intermediate parameters. Efficient search routine is used to find a suitable combination of these two parameters corresponding to given proportions of tooth and slot. For λ/g larger than 80 and d/s between 0.3 and 1, the effect of slot depth is negligible, but for λ/g equal to or less than 80 a family of permeance correction factor curves is obtained which may be used to correct for finite slot depth in permeance calculations based on infinitely deep slots. This effect is important in stepping and switched reluctance motors, particularly those with multiple teeth per stator pole.

Keywords

Citation

Faiz, J. and Finch, J.W. (2000), "Effect of slot depth on the permeance of aligned teeth in a doubly‐salient rectilinear toothed structure", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 19 No. 1, pp. 95-105. https://doi.org/10.1108/03321640010303185

Publisher

:

MCB UP Ltd

Copyright © 2000, MCB UP Limited

Related articles