Phys. Rev. ST Accel. Beams 8, 014401 (2005) [22 pages]

Velocity bunching of high-brightness electron beams

Download: PDF (1582 kB) , One-column PDF (1596 kB), or gzip'ed PS (1734 kB) Export: BibTeX or EndNote (RIS)

S. G. Anderson1 *, P. Musumeci2, J. B. Rosenzweig2, W. J. Brown1, R. J. England2, M. Ferrario3, J. S. Jacob1, M. C. Thompson2, G. Travish2, A. M. Tremaine1, and R. Yoder2
1Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550, USA
2Department of Physics and Astronomy, University of California, Los Angeles, 405 Hilgard Avenue, Los Angeles, California 90095, USA
3Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Frascati, 41 Via Enrico Fermi, Frascati (Roma), Italy

Received 28 April 2004; published 18 January 2005

Velocity bunching has been recently proposed as a tool for compressing electron beam pulses in modern high brightness photoinjector sources. This tool is familiar from earlier schemes implemented for bunching dc electron sources, but presents peculiar challenges when applied to high current, low emittance beams from photoinjectors. The main difficulty foreseen is control of emittance oscillations in the beam in this scheme, which can be naturally considered as an extension of the emittance compensation process at moderate energies. This paper presents two scenarios in which velocity bunching, combined with emittance control, is to play a role in nascent projects. The first is termed ballistic bunching, where the changing of relative particle velocities and positions occur in distinct regions, a short high gradient linac, and a drift length. This scenario is discussed in the context of the proposed ORION photoinjector. Simulations are used to explore the relationship between the degree of bunching, and the emittance compensation process. Experimental measurements performed at the UCLA Neptune Laboratory of the surprisingly robust bunching process, as well as accompanying deleterious transverse effects, are presented. An unanticipated mechanism for emittance growth in bends for highly momentum chirped beam was identified and studied in these experiments. The second scenario may be designated as phase space rotation, and corresponds closely to the recent proposal of Ferrario and Serafini. Its implementation for the compression of the electron beam pulse length in the PLEIADES inverse Compton scattering (ICS) experiment at LLNL is discussed. It is shown in simulations that optimum compression may be obtained by manipulation of the phases in low gradient traveling wave accelerator sections. Measurements of the bunching and emittance control achieved in such an implementation at PLEIADES, as well as aspects of the use of velocity-bunched beam directly in ICS experiments, are presented.


©2005 The American Physical Society

URL: http://link.aps.org/abstract/PRSTAB/v8/e014401
DOI: 10.1103/PhysRevSTAB.8.014401
PACS: 41.60.Ap, 29.27.Bd, 52.59.Sa

* Electronic address: anderson131@llnl.gov

[ Abstract  |  Previous article  |  Next article  |  Issue 1 ]