• Open Access

Universal picosecond timing system for the Facility for Antiproton and Ion Research

M. Bousonville and J. Rausch
Phys. Rev. ST Accel. Beams 12, 042801 – Published 3 April 2009

Abstract

The present article presents a system making it possible to produce time information at spatially separate points with picosecond range precision. By using this time information, the accelerator and storage rings of the Facility for Antiproton and Ion Research (FAIR) are to be synchronized. To do this, the rf cavities of these ring accelerators have to be controlled by signals having different phases and frequencies (0.4 to 5.4 MHz). Some frequencies of the signals are variable during acceleration due to what is referred to as ramp control. To enable synchronization of all these different signals, also during acceleration, the signals for controlling the cavities are not sent directly by the timing system, but instead two clock signals of constant frequency are sent. These clock signals are produced phase synchronously at different points up to 1 km apart and represent the time information. With the help of these clock signals, it is then possible to synchronize frequency generators that produce the signals actually needed for the cavities. Because of the universal character of the time information produced, it can be used not only to control the cavities but also to synchronize other processes. To transmit the clock signals, an optical network with dense wavelength division multiplex methods is used. The delay of the clock signals is measured and with the help of the delay information a reference generator produces, at the end of each transmission line, a phase-synchronous and phase-stable time reference. Since the delays of the clock signals are not constant due to environmental influences, they must be determined regularly. Using a prototype of this system, a precision of the time information of 21.2 ps on average was achieved. The short-term jitter exhibits a standard deviation of 7.57 ps. In addition to the description of the system, detailed information on noise characteristics is provided that can also be used to optimize other optical systems for transmission of time information.

  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
8 More
  • Received 5 December 2008

DOI:https://doi.org/10.1103/PhysRevSTAB.12.042801

This article is available under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Authors & Affiliations

M. Bousonville*

  • GSI Helmholtz Centre for Heavy Ion Research GmbH, Planckstraße 1, 64291 Darmstadt, Germany

J. Rausch

  • Technische Universität Darmstadt, Merckstraße 25, 64283 Darmstadt, Germany

  • *M.Bousonville@gsi.de

Article Text

Click to Expand

References

Click to Expand
Issue

Vol. 12, Iss. 4 — April 2009

Reuse & Permissions
Author publication services for translation and copyediting assistance advertisement

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review Accelerators and Beams

Reuse & Permissions

It is not necessary to obtain permission to reuse this article or its components as it is available under the terms of the Creative Commons Attribution 3.0 License. This license permits unrestricted use, distribution, and reproduction in any medium, provided attribution to the author(s) and the published article's title, journal citation, and DOI are maintained. Please note that some figures may have been included with permission from other third parties. It is your responsibility to obtain the proper permission from the rights holder directly for these figures.

×

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×