The mechanical behavior of grain boundaries in metals has been a subject of constant controversy. The present research is designed to examine thoroughly the mechanical behavior of grain boundaries in metals in a quantitative manner. A simple torsional apparatus has been devised for measuring four types of anelastic effects at very low stress levels, namely: internal friction at low frequencies; variation of dynamic rigidity with temperature; creep under constant stress; and stress relaxation at constant strain. All four types of anelastic effects have been studied in 99.991 percent polycrystalline aluminum as well as in single crystal aluminum; these effects are practically absent in single crystal aluminum. The four types of anelastic effects observed in polycrystalline aluminum are completely recoverable and are linear with respect to the applied stress and prior strain. They satisfy the interrelations derived by Zener from Boltzmann's superposition principle within experimental error. These are consistent with the viewpoint that the grain boundaries behave in a viscous manner. The maximum amount of shear stress relaxation in polycrystalline aluminum determined by the four types of anelastic measurements is about 33 percent. This is in good agreement with the theoretical value of 36 percent calculated by assuming the grain boundary to be viscous. The heat of activation associated with the viscous slip along the grain boundaries has been found to be 34,500 calories per mole. The coefficient of viscosity of the grain boundaries in aluminum estimated using this heat of activation, is consistent with that of molten aluminum at the same temperature. Similar anelastic effects have been also observed in polycrystalline magnesium, indicating that the viscous behavior is common to all metals.

• Received 12 November 1946

DOI:https://doi.org/10.1103/PhysRev.71.533