The following article is Open access

Friction measurement system using load cell for Tribotronic system on Pin-On-Disc (POD) tribometer

, and

Published under licence by IOP Publishing Ltd
, , Citation M Shaparuddin Bahrudin et al 2013 IOP Conf. Ser.: Earth Environ. Sci. 16 012114 DOI 10.1088/1755-1315/16/1/012114

Download Article PDF

Article metrics

1084 Total downloads

Share this article

Author affiliations

1 Center for Micro and Nano Engineering (CeMNE), College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM – UNITEN, 43000 Kajang, Selangor, Malaysia

2 Center for Automation and Embedded Computing System (CAECS), College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM – UNITEN, 43000 Kajang, Selangor, Malaysia

Buy this article in print

Journal RSS
Sign up for new issue notifications
1755-1315/16/1/012114

Abstract

This paper discusses part of Tribotronic system on Pin-On-Disc (POD) Tribometer focusing on friction measurement using load cell. The analysis conducted using MATLAB software to measure Coefficient of Friction (CoF) of 2 sample types in order to prove the validity of the measurement. The 2 samples are lubricant (Shell Helix Fully synthetic oil) and lubricant (Shell Helix Fully synthetic oil) with additive. It is revealed that the measurement of the lubricant with additive shows better CoF (0.006) than lubricant without additive, CoF of 0.02.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1755-1315/16/1/012114