References

• 1. 1)
     • J. Latzko , K. Munzinger . Draw-out metal-clad units for low-oil-volume circuit breakers rated 12, 24 and 36 kV. Brown Boveri Rev. , 268 - 278
  2. 2)
     • Power systems techniques. Elect. Times , 128 - 131
  3. 3)
     • E.H. Cox . Problems of the supply engineer in the 20th century. Proc. IEE , 4 , 796 - 798
  4. 4)
     • Cooperation with a competitor. Elect. Rev. , 808 - 812
  5. 5)
     • R.L. Winship . Vacuum switches versus circuit breakers for capacitor bank switching. Allis Chalmers Engng. Rev. , 30 - 32
  6. 6)
     • W.S. Einwechter , R.M. Pennypacker . Single-bus design proves best for substations. Elect. World , 60 - 61
  7. 7)
     • A.G. Milne , J.H. Maltby . An integrated system of metropolitan electricity supply. Proc. IEE , 6 , 745 - 754
  8. 8)
     • R.E. Kozlowski . Mozart substation-the first supervisory controlled 12/4 kV substation. IEEE Trans. , 327 - 336
  9. 9)
     • M. Honnens . Mittelspannungs anlagen mit Leistungsschaltern und Lasttrennern. Elektrizitätswirtschaft , 558 - 564
  10. 10)
      • A. Wright . Report upon fuses in series with circuit breakers. Reyrolle Rev. , 14 - 19
  11. 11)
      • L.K. Greiner . Increasing the permissible temperature rise of silver contacts and contacts containing silver. Elektrotekhnika
  12. 12)
      • Turner, H.W., Turner, C.: `Materials for heavy-duty contacts', 5239, ERA Report, 1967.
  13. 13)
      • S.H. Money , J. Harris . Autoreclosing switchgear in distribution practice. Proc. IEE , 2 , 288 - 300
  14. 14)
      • H.G. Frus , J.E. Nugent , E.B. Rietz . Metal-clad switchgear for 23 and 34.5kV. IEEE Trans , 327 - 337
  15. 15)
      • D.G. Eastwood . SF6switchgear for use in coalmines at voltages of 6.6 and 11 kV. Elect. Rev. , 50 - 52
  16. 16)
      • G.P. Hutchinson . Interlocking in large electricity-supply substations—a fundamental approach. Proc. IEE , 6 , 1063 - 1074
  17. 17)
      • J.R. Harbottle . Direct transformation, the 11 kV switchgear problem. Elect. Times , 609 - 612
  18. 18)
      • C.J.O. Garrard . Scope for co-operation in switchgear design. Elect. Rev. , 484 - 488
  19. 19)
      • H. Schwarz , P. Sieber . Über Kunststoffe in Mittelspannungs-Schaltanlagen. AEG Mitt. , 241 - 246
  20. 20)
      • B. Fleck , W. Horn . Hochspannungs-Schaltgeräte und -Schaltanlagen. Elektrotech. Z. , 473 - 481
  21. 21)
      • R.T. Lythall . High-voltage motor-control gear. Elect. Rev. , 460 - 463
  22. 22)
      • K.K. Schwarz . The design and performance of high- and lowvoltage terminal boxes. Proc. IEE , 151 - 172
  23. 23)
      • C.H. Flurscheim . Switchgear, a review of progress. Proc. I.E.E., Part A , 9 , 239 - 262
  24. 24)
      • Independent short-circuit testing station. Elect. Rev.
  25. 25)
      • G.F. Peirson , A.H. Pollard , N. Care . Automatic circuit reclosers. Proc. IEE , 6 , 749 - 771
  26. 26)
      • W. Schick . Verriegelungen in elektrischen Schaltanlagen. Elektrotech. Z. , 425 - 430
  27. 27)
      • Development of the BEAMA/CEGB motor terminal box. BEAMA J. , 39 - 45
  28. 28)
      • W. Gray , D.F. Amer . Some recent developments in switch gear. Trans. S. Afr. Inst. Elect. Engrs. , 133 - 152
  29. 29)
      • Wedmore, E.B., Whitney, W.B.: `Gas-blast circuit breaker', 278764, 1927, British Patent.
  30. 30)
      • C.J.O. Garrard . High-voltage switchgear, a review of progress. Proc. IEE , 9 , 1523 - 1539
  31. 31)
      • : `Side-blast arc-control pot', 366998, 1930, British Patent, ERA.