Issue 13, 2019

Silyl diol ester as a new selectivity control agent in MgCl2-supported Ziegler–Natta systems for propylene polymerization: catalyst structure and polymer properties

Abstract

In this study, bis(benzoyloxy)dimethylsilane (SDE) was developed as a non-phthalate selectivity control agent (internal donor (ID) and external donor (ED)) in MgCl2-supported Ziegler–Natta (ZN) systems. The impact of SDE as an ID was investigated in regards to chemical composition, morphology, adsorption behavior (using FTIR spectroscopy, WAXD and SEM studies) and the propylene polymerization performance of the catalyst. The results of the adsorption behavior of SDE revealed that SDE, while able to stabilize the electronically unsaturated surfaces of MgCl2 [(104) and (110)], has a rather high tendency to be absorbed on strongly acidic Mg ions at the corners of these crystals. The catalyst with optimum SDE content as an ID afforded a system with reasonable activity and isotacticity (even in the absence of ED) along with broader molecular weight distribution (PDI: 6.2–10) and greater flexural modulus than phthalate-based ZN systems. SDE was also used as a new ED in most widely used fourth- and fifth-generation catalyst systems. The results revealed that in fifth-generation catalyst systems, there was an increase in hydrogen response (>40%) along with an increase of activity without any change in the thermal properties of the final polymer in comparison to a conventional ED (alkoxy silane).

Graphical abstract: Silyl diol ester as a new selectivity control agent in MgCl2-supported Ziegler–Natta systems for propylene polymerization: catalyst structure and polymer properties

Supplementary files

Article information

Article type
Paper
Submitted
26 Jan 2019
Accepted
19 Feb 2019
First published
06 Mar 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 7420-7431

Silyl diol ester as a new selectivity control agent in MgCl2-supported Ziegler–Natta systems for propylene polymerization: catalyst structure and polymer properties

F. Poorsank, H. Arabi and N. Ghasemi Hamedani, RSC Adv., 2019, 9, 7420 DOI: 10.1039/C9RA00715F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements