Issue 25, 2016

Effect of a static magnetic field on the preparation of MnOOH and Mn3O4 by a hydrothermal process

Abstract

In this paper, manganese oxides/oxyhydroxides were prepared by a low-temperature hydrothermal process in a static magnetic field. The products were analyzed with XRD, TEM, HRTEM and VSM. Single-crystalline nanowires (20 nm in diameter and 1 μm in length) of MnOOH were obtained under zero magnetic fields. However, some cubic particles of Mn3O4 were formed when a static magnetic field was applied. Furthermore, the quantity of Mn3O4 increased with the increase of the magnetic flux density. Quantitative thermodynamic calculation results showed that the magnetic Gibbs energy would change the direction of the chemical reaction to obtain Mn3O4.

Graphical abstract: Effect of a static magnetic field on the preparation of MnOOH and Mn3O4 by a hydrothermal process

Article information

Article type
Paper
Submitted
18 Nov 2015
Accepted
02 Feb 2016
First published
03 Feb 2016

RSC Adv., 2016,6, 21037-21042

Effect of a static magnetic field on the preparation of MnOOH and Mn3O4 by a hydrothermal process

L. C. Dong, Y. B. Zhong, S. Zhe, T. Y. Zheng and H. Wang, RSC Adv., 2016, 6, 21037 DOI: 10.1039/C5RA24350E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements