Abstract
Titanium and its alloys are widely used in load-bearing bioinert implants. Bioactive glasses (BAGs) form a chemical bond with bone, but they are not suitable for load-bearing applications. Creating a BAG coating on a titanium implant could combine the best properties of both materials. The results tend to be poor when conventional firing methods are applied to coat titanium with BAG. A local application of heat to melt the glass can be achieved by a CO2 laser. A new method is introduced to create BAG coatings on titanium locally in a controlled manner, with a focused CO2 laser beam. The coatings produced by this method precipitate calcium phosphate in vitro. Processing parameters (number of coated layers, laser power, and processing atmosphere) providing a firm attachment of the glass and good in vitro bioactivity were identified. XRD analysis showed no crystallisation of the glass due to processing with the laser. EDXA indicated the formation of a calcium phosphate layer, which FTIR suggested to be a hydroxyapatite. The results show CO2 laser processing to be a promising technique for the manufacture of 30–40 μm BAG coatings on titanium.
Similar content being viewed by others
References
L. L. HENCH, R. J. SPLINTER, W. C. ALLEN and T. K. GREENLEE, J. Biomed. Mater. Res. 5 (1971) 117.
D. F. WILLIAMS, in “Definitions in Biomaterials”, Proceedings of a Consensus Conference of the European Society for Biomaterials Chester, England, UK, 1986, vol. 4 (Elsevier, Amsterdam, 1987) pp. 24, 28 and 64.
L. L. HENCH and ö. H. ANDERSSON, in “An Introduction to BIOCERAMICS. Advanced Series in Ceramics”, vol. 1 (World Scientific, Singapore, 1993) pp. 41-62.
ö. H. ANDERSSON, in “The Bioactivity of Silicate Glass. Academic Dissertation” (Åbo Akademi University, Turku, 1990).
A. ITäLä, E. G. NORDSTRöM, H. O. YLäNEN, H. T. ARO and M. HUPA, J. Biomed. Mater. Res. 56(2) (2001) 282.
M. JOKINEN, T. PELTOLA, J. SIMOLA, J. KORVENTAUSTA and A. YLI-URPO, in “Proceedings of the 13th International Symposium On Ceramics in Medicine, Key Engineering Materials”, Bologna, 2000, p. 601.
M. PEREIRA and L. L. HENCH, J. Sol-Gel. Sci. Tech. 7 (1996) 59.
D. F. WILLIAMS, in “Definitions in Biomaterials”, Proceedings of a consensus conference of the European Society for Biomaterials Chester, England, UK, 1986, vol. 4 (Elsevier, Amsterdam, 1987) p. 38.
L. L. HENCH and ö. H. ANDERSSON, in “An Introduction to BIOCERAMICS. Advanced Series in Ceramics”, vol. 1 (World Scientific, Singapore, 1993) pp. 239-260.
ö. H. ANDERSSON, K. H. KARLSSON, H. HERO, E. VEDEL, A. YLI-URPO, K. J. J. PAJAMäKI and T. S. LINDHOLM, J. Mater. Sci.: Mater. Med. 6 (1995) 242.
J. HAUTANIEMI, in “Oxidation and Porcelain Veneering of Ti and Pd Alloys. Academic Dissertation” (University of Turku, Turku, 1993).
M. BRINK, in “Bioactive Glasses with a Large Working Range. Academic Dissertation” (Åbo Akademi University, Turku, 1997).
W. M. STEEN, in “Laser Materials Processing” (Springer-Verlag, London, 1991).
T. CHIA, L. L. HENCH, C. QIN and C. K. HSIEH, Mat. Res. Soc. Symp. Proc. 190 (1990) 819.
T. KOKUBO, H. KUSHITANI, S. SAKKA, T. KITSUGI and T. YAMAMURO, J. Biomed. Mater. Res. 24 (1990) 721.
ö. H. ANDERSSON and K. H. KARLSSON, in “Proceedings of the 8th European Conference on Biomaterials”, vol. 8 (Elsevier, Amsterdam, 1990).
ö. H. ANDERSSON and I. KANGASNIEMI, J. Biomed. Mater. Res. 25(8) (1991) 1019.
I. REHMAN and W. BONFIELD, J. Mater. Sci. Mater. Med. 8 (1997) 1.
M. REGINA, T. FILGUEIRAS, G. LATORRE and L. L. HENCH, J. Biomed. Mater. Res. 27 (1993) 1485.
L. L. HENCH, J. Am. Ceram. Soc. 74(7) (1991) 1487.
J. SERRA, P. GONZáLEZ, S. LISTE, S. CHIUSSI, B. LEóN, M. PéREZ-AMOR, H. O. YLäNEN and M. HUPA, J. Mater. Sci.: Mater. Med. 13 (2002) 1221.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moritz, N., Vedel, E., Ylänen, H. et al. Characterisation of bioactive glass coatings on titanium substrates produced using a CO2 laser. Journal of Materials Science: Materials in Medicine 15, 787–794 (2004). https://doi.org/10.1023/B:JMSM.0000032819.64994.42
Issue Date:
DOI: https://doi.org/10.1023/B:JMSM.0000032819.64994.42