Abstract

A direct-charge transfer (DCT) biosensor was developed for the detection of the foodborne pathogen, Bacillus cereus. The biosensor was fabricated using antibodies as the sensing element and polyaniline nanowire as the molecular electrical transducer. The sensor design consisted of four membrane pads, namely, sample application, conjugate, capture and absorption pads. Two sets of polyclonal antibodies, secondary antibodies conjugated with polyaniline nanowires and capture antibodies were applied to the conjugate and the capture pads of the biosensor, respectively. The detection technique was based on capillary flow action which allowed the liquid sample to move from one membrane to another. The working principle involved antigen–antibody interaction and direct electron charge flow to generate a resistance signal that was being recorded. Detection from sample application to final results was completed in 6 min in a reagentless process. Experiments were conducted to find the best performance of the biosensors by varying polyaniline types and concentrations. Polyaniline protonated with hydrochloric acid, emeraldine salt and polyaniline protonated with perchloric acid were the three kinds of polyaniline used in this study. The biosensor sensitivity in pure cultures of B. cereus was found to be 10¹ to 10² CFU/ml. Results indicated that using emeraldine salt at a concentration of 0.25 g/ml gave the best biosensor performance in terms of sensitivity. The biosensor was also found to be specific in detecting the presence of B. cereus in a mixed culture of different Bacillus species and other foodborne pathogens. The speed, sensitivity and ease-of-use of this biosensor make it a promising device for rapid field-based diagnosis towards the protection of our food supply chain. The phenotypic and genotypic similarities between B. cereus and Bacillus anthracis will also allow this biosensor to serve as an excellent model for the detection of B. anthracis.

Keywords: Polyaniline; Direct-charge transfer; Transducer; Nanowires; Biosensor; Bacillus species

Article Outline

1. Introduction

2. Materials and methods

2.1. Reagents and bacterial isolates

2.2. Biosensor design

2.3. Polyaniline polymerization and characterization

2.4. Preparation of polyaniline–antibody conjugates

2.5. Preparation of capture, conjugate, sample application and absorption membrane pads

2.6. Biosensor testing and detection principle

2.7. Determining the biosensor sensitivity and specificity

2.8. Statistical analysis

3. Results and discussion

4. Conclusion

Acknowledgements

References