Porous chitosan scaffolds for tissue engineering
Abstract
The wide array of tissue engineering applications exacerbates the need for biodegradable materials with broad potential. Chitosan, the partially deacetylated derivative of chitin, may be one such material. In this study, we examined the use of chitosan for formation of porous scaffolds of controlled microstructure in several tissue-relevant geometries. Porous chitosan materials were prepared by controlled freezing and lyophilization of chitosan solutions and gels. The materials were characterized via light and scanning electron microscopy as well as tensile testing. The scaffolds formed included porous membranes, blocks, tubes and beads. Mean pore diameters could be controlled within the range 1–250 μm, by varying the freezing conditions. Freshly lyophilized chitosan scaffolds could be treated with glycosaminoglycans to form ionic complex materials which retained the original pore structure. Chitosan scaffolds could be rehydrated via an ethanol series to avoid the stiffening caused by rehydration in basic solutions. Hydrated porous chitosan membranes were at least twice as extensible as non-porous chitosan membranes, but their elastic moduli and tensile strengths were about tenfold lower than non-porous controls. The methods and structures described here provide a starting point for the design and fabrication of a family of polysaccharide based scaffold materials with potentially broad applicability.
References (0)
Cited by (1402)
Progress in cardiac tissue engineering and regeneration: Implications of gelatin-based hybrid scaffolds
2024, International Journal of Biological MacromoleculesCardiovascular diseases, particularly myocardial infarction (MI), remain a leading cause of morbidity and mortality worldwide. Current treatments for MI, more palliative than curative, have limitations in reversing the disease completely. Tissue engineering (TE) has emerged as a promising strategy to address this challenge and may lead to improved therapeutic approaches for MI. Gelatin-based scaffolds, including gelatin and its derivative, gelatin methacrylate (GelMA), have attracted significant attention in cardiac tissue engineering (CTE) due to their optimal physical and biochemical properties and capacity to mimic the native extracellular matrix (ECM). CTE mainly recruits two classes of gelatin/GelMA-based scaffolds: hydrogels and nanofibrous. This article reviews state-of-the-art gelatin/GelMA-based hybrid scaffolds currently applied for CTE and regenerative therapy. Hybrid scaffolds, fabricated by combining gelatin/GelMA hydrogel or nanofibrous scaffolds with other materials such as natural/synthetic polymers, nanoparticles, protein-based biomaterials, etc., are explored for enhanced cardiac tissue regeneration functionality. The engraftment of stem/cardiac cells, bioactive molecules, or drugs into these hybrid systems shows great promise in cardiac tissue repair and regeneration. Finally, the role of gelatin/GelMA scaffolds combined with the 3D bioprinting strategy in CTE will also be briefly highlighted.
A review on the application of chitosan-based polymers in liver tissue engineering
2024, International Journal of Biological MacromoleculesChitosan-based polymers have enormous structural tendencies to build bioactive materials with novel characteristics, functions, and various applications, mainly in liver tissue engineering (LTE). The specific physicochemical, biological, mechanical, and biodegradation properties give the effective ways to blend these biopolymers with synthetic and natural polymers to fabricate scaffolds matrixes, sponges, and complexes. A variety of natural and synthetic biomaterials, including chitosan (CS), alginate (Alg), collagen (CN), gelatin (GL), hyaluronic acid (HA), hydroxyapatite (HAp), polyethylene glycol (PEG), polycaprolactone (PCL), poly(lactic-co-glycolic) acid (PGLA), polylactic acid (PLA), and silk fibroin gained considerable attention due to their structure-properties relationship. The incorporation of CS within the polymer matrix results in increased mechanical strength and also imparts biological behavior to the designed PU formulations. The significant and growing interest in the LTE sector, this review aims to be a detailed exploration of CS-based polymers biomaterials for LTE. A brief explanation of the sources and extraction, properties, structure, and scope of CS is described in the introduction. After that, a full overview of the liver, its anatomy, issues, hepatocyte transplantation, LTE, and CS LTE applications are discussed.
Chitosan scaffolds: Expanding horizons in biomedical applications
2024, Carbohydrate PolymersChitosan, a natural polysaccharide from chitin, shows promise as a biomaterial for various biomedical applications due to its biocompatibility, biodegradability, antibacterial activity, and ease of modification. This review overviews “chitosan scaffolds” use in diverse biomedical applications. It emphasizes chitosan's structural and biological properties and explores fabrication methods like gelation, electrospinning, and 3D printing, which influence scaffold architecture and mechanical properties. The review focuses on chitosan scaffolds in tissue engineering and regenerative medicine, highlighting their role in bone, cartilage, skin, nerve, and vascular tissue regeneration, supporting cell adhesion, proliferation, and differentiation. Investigations into incorporating bioactive compounds, growth factors, and nanoparticles for improved therapeutic effects are discussed. The review also examines chitosan scaffolds in drug delivery systems, leveraging their prolonged release capabilities and ability to encapsulate medicines for targeted and controlled drug delivery. Moreover, it explores chitosan's antibacterial activity and potential for wound healing and infection management in biomedical contexts. Lastly, the review discusses challenges and future objectives, emphasizing the need for improved scaffold design, mechanical qualities, and understanding of interactions with host tissues. In summary, chitosan scaffolds hold significant potential in various biological applications, and this review underscores their promising role in advancing biomedical science.
An influence of molecular weight, deacetylation degree of chitosan xerogels on their antimicrobial activity and cytotoxicity. Comparison of chitosan materials obtained using lactic acid and CO<inf>2</inf> saturation
2023, Carbohydrate ResearchThis paper presents a comparison of the antimicrobial activity and cytotoxicity against L929 cells of chitosan xerogels prepared by dissolving the polymer in a solution of lactic acid (LA) or carbonic acid (CO2) and then freeze-drying. There was no simple relationship between the antimicrobial activity and cytotoxicity of the samples obtained using both techniques (LA and CO2). Chitosan materials obtained by the LA method in a 1:1 dilution were characterized by the highest cytotoxicity against L929 cells (∼20%). For the same diluted samples prepared using the CO2 saturation method, the viability of L929 cells was approximately 2.5 times greater. Some of the tested chitosan materials obtained by the innovative method were characterized by significantly lower antimicrobial activity, for example, reduction of E. coli bacteria for MMW-LA and MMW-CO2 samples by 6.00 and 0.75 logarithmic order, respectively. This clearly indicates that in many applications, the presence of the acid necessary to dissolve chitosan is responsible for the antimicrobial activity of the polymer solution and its products.
Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review
2023, Environmental ResearchFunctionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.
A new route of production of the meso-porous chitosan with well-organized honeycomb surface microstructure from shrimp waste without destroying the original structure of native shells: Extraction, modification and characterization study
2023, Results in EngineeringThe highly active bio-polysaccharide based compound namely chitin and chitosan have been extracted from shrimp shell which usually expelled out extensively from food processing industries and considered as waste materials. However, by conducting demineralization, de-proteinization and deacetylation on it which could be a new route of production of valuable meso-porous chitosan that possesses a noteworthy well-organized honeycomb like surface microstructure which undoubtedly capable to form sustainable bio-composites. Whereas the honeycomb like microstructures showed a well-defined pore canals (Pc) and pore canal tubes (Pct) onto their surface. The samples were characterized via ATR-FTIR spectroscopy, High resolution SEM, AFM, EDX, XRD and 13C solid-state Cross-Polarization Magic Angle Spinning (CPMAS) NMR. The molecular weight() of isolated chitin and chitosan were determined by viscosity and the values were 1.06 × 106( = 5228), 1.8 × 104( = 116) respectively besides degree of deacetylation (DDA) were measured by ATR-FTIR spectroscopy, CPMAS NMR, pH-metric titration and the values were 24&21 for chitin and 84&82 for chitosan. The results suggest that the shrimp shell waste is an attractive source of well-organized honeycomb like meso-porous chitin and chitosan with regular surface microstructures which might have a significant/potential application into the sustainable bio-composite formulation due to various industrial and biomedical sector indeed.