Advantages and Industrial Applications of Three-Dimensional Surface Roughness Analysis
References (23)
- et al.
Mapping of small area of a surface
J. Phys. E.
(1976) Evaluation, revision and application of the NBS stylus/computer system for the measurement of surface roughness
(1976)- N.N. 1979, Le rugosimètre tridimensionnel pour une meilleure evaluation des états de surface. Centre technique des...
- et al.
A three-dimensional measuring technique for surface asperities
Wear
(1981) - et al.
Wide range three-dimensional roughness measuring system
Prec. Eng.
(1984) - De Chiffre L. NielsenH.S. 9 1987 A digital system for surface roughness analysis of plane and cylindrical partsPrec....
- et al.
The use of 3-D topographic analysis to determine the microgeometry transfer characteristics of textured sheet surfaces through rolling
Annals of the CIRP
(1992) - Stout, K.J. 1991, The development of an integrated approach to 3D surface finish assessment, Interim Report, EC...
The development methods for the characterization of roughness in 3 dimensions
Phase II report
(1993)An approach to the evaluation of surface profiles by separating them into functionally different parts
Surface Topography
(1988)
Developments in surface texture measurement
Surface Topography
(1988)
Cited by (38)
The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle
2024, Tribology InternationalThe nanostructure and microstructure of SiC surface layers deposited by MWCVD and ECRCVD
2017, Applied Surface ScienceCitation Excerpt :The commonest method for characterizing the surface roughness, parameter Ra, is insufficient. In this work many other height based parameters were used, which can also describe the heights of peaks, valleys, and other features [27,28]. In addition, measures of the spatial variation, and functions that describe both the shape and structure of the rough surfaces were applied.
Copyright © 1994 CIRP. Published by Elsevier Ltd. All rights reserved.