Elsevier

Renewable Energy

Volume 5, Issues 1–4, August 1994, Pages 495-501
Renewable Energy

Solar thermal application
Fast-response storage-type solar cooker

https://doi.org/10.1016/0960-1481(94)90423-5Get rights and content

Abstract

All the solar powered cookers presently available in the world market are of the so-called “Reflector Box” type. Despite the fact that they have been presented, for a good few years, to the market and are very simple and low cost they have not managed to establish any meaningful and noticeable presence in a viable commercial sense. This fact is even more in evidence in those markets they are primarily designed for. The reasons to the lack of commercial success for the reflector box type cookers are analysed in some details. The assessment of general features and performance of the reflector box type cooker led to the design of the Fast Response Storage Type Cooker presented in this paper.

The new cooker is the result of combination of non-tracking compound parabolic reflector, fast response heat pipes, high-quality and low-cost thermal insulator, low-loss thermal storage battery, glass to metal seals, vacuum technology and bimetal automatic switches. It is capable of storing the solar energy during the day to facilitate cooking during the evenings and nights. A prototype is made and the performance of the elements of the system are presented. It shows how the “waste-energy” of the cooker can be used for other applications.

References (4)

  • Trisolar Foundation, Perth, Australia, (Private Communication),...
There are more references available in the full text version of this article.

Cited by (5)

  • Institutional cooking with solar energy: A review

    2018, Renewable and Sustainable Energy Reviews
    Citation Excerpt :

    Saxena et al. [54] and Lahkar et al. [55] have presented reviews on thermodynamic aspects of solar cookers. To enable solar cooking during cloudy and off sun-shine hours in late evening, arrangement for heat storage either in sensible or latent form using phase change materials (PCM) is required [56–61]. Investigations on solar cooker designs with heat storage have also been made by the researchers [40,41,43,62–64].

  • A thermodynamic review on solar box type cookers

    2011, Renewable and Sustainable Energy Reviews
    Citation Excerpt :

    In the design the hot mixture was to run down through a pipe to a thermo-symphonic heat pipe whose condenser forms the hot plate of the heat pipe. A knob was used to control the heat transfer from the tank of the box cooker to the hot plate [123]. Stumpf et al. have described a three collector-based solar cooking systems in which two of them had a direct single-stage heat-pipe coupling between collector and oven plate.

  • Solar cooking innovations, their appropriateness, and viability

    2022, Environmental Science and Pollution Research
View full text