Gravity-driven laminar film flow of power-law fluids along vertical walls

https://doi.org/10.1016/0377-0257(88)85011-0Get rights and content

Abstract

A theoretical analysis is presented which brings steady laminar film flow of power-law fluids within the framework of classical boundary layer theory. The upper part of the film, which consists of a developing viscous boundary layer and an external inviscid freestream, is treated separately from the viscous dominated part of the flow, thereby taking advantage of the distinguishing features of each flow region. It is demonstrated that the film boundary layer developing along a vertical wall can be described by a generalized Falkner-Skan type equation originally developed for wedge flow. An exact similarity solution for the velocity field in the film boundary layer is thus made available.

Downstream of the boundary layer flow regime the fluid flow is completely dominated by the action of viscous shear, and fairly accurate solutions are obtained by the Von Karman integral method approach. A new form of the velocity profile is assumed, which reduces to the exact analytic solution for the fully-developed film. By matching the downstream integral method solution to the upstream generalized Falkner-Skan similarity solution, accurate estimates for the hydrodynamic entrance length are obtained. It is also shown that the flow development in the upstream region predicted by the approximate integral method closely corresponds to the exact similarity solution for that flow regime. An analytical solution of the resulting integral equation for the Newtonian case is compared with previously published results.

References (27)

  • J.C. Slattery

    Chem. Eng. Sci.

    (1962)
  • R.L. Cerro et al.

    Chem. Eng. Sci.

    (1971)
  • S. Whitaker et al.

    Chem. Eng. Sci

    (1974)
  • N.S. Murty et al.

    Chem. Eng. Sci.

    (1973)
  • A. Acrivos et al.

    Chem. Eng. Sci.

    (1965)
  • H.I. Andersson

    ASME Symposium on Thin Fluid Films

    (1987)
  • E.M. Sparrow et al.

    J. Heat Transfer ASME

    (1959)
  • H.I. Andersson et al.

    J. Appl. Mech. ASME

    (1985)
  • A.H.P. Skelland
    (1967)
  • W.R. Schowalter
    (1978)
  • W.R. Schowalter

    AIChE J.

    (1960)
  • A. Acrivos et al.

    AIChE J.

    (1960)
  • V.M. Falkner et al.

    Philos. Mag. VII

    (1931)
  • Cited by (45)

    • Non-similar mathematical and dynamical analysis of Cross nano-materials over a gravitationally effected surface

      2023, Ain Shams Engineering Journal
      Citation Excerpt :

      The power-law fluid model [1] has acquired widespread popularity in these simulations. The viscous forces dominant region equations for generalized Newtonian fluid(GNF) flow were thoroughly examined in [2–6]. The flow and heat transport of a power-law fluid across a moving surface were explored in [7,8].

    • Jets of three-phase power-law fluids and foam jet mixing in gypsum slurry

      2018, Construction and Building Materials
      Citation Excerpt :

      It should be emphasized that shear-thinning power-law submerged jets reveal significant differences from their Newtonian counterparts, as well as from the other inelastic non-Newtonian fluid jets, e.g. the yield-stress Bingham fluid jets [16]. Moreover, submerged power-law fluid jets also reveal significant differences from the corresponding non-Newtonian wall-jets and the other jet-like flows restricted by walls, e.g. the coating flows and the impingement jets [17–31]. Note also that the questions of interest in relation to submerged jets of power-law fluids are radically different from those related to free-surface jets of power-law fluids [32–37].

    • Laminar film condensation of pseudo-plastic non-Newtonian fluid with variable thermal conductivity on an isothermal vertical plate

      2016, International Journal of Heat and Mass Transfer
      Citation Excerpt :

      Sylvester et al. [14] also measured the film thickness as a function of the volumetric flow rate, but they primarily focused on the onset of rippling on the film surface and the characteristics of wavy film. In addition, some theoretical analysis of the power-law fluid film have been done by means of integral method or similarity analysis [15–22]. In most of the classical works, the authors only take into account the power-law kinematic viscosity in momentum equations of non-Newtonian fluids and still treat the thermal conductivity as a constant.

    View all citing articles on Scopus
    View full text