Effects of incidence and afterbody shape on flow past bluff cylinders

doi:10.1016/0167-6105(94)90092-2

Journal of Wind Engineering and Industrial Aerodynamics

Volume 53, Issue 3, December 1994, Pages 375-399

https://doi.org/10.1016/0167-6105(94)90092-2 Get rights and content

Abstract

In the present paper the effects of the afterbody shape and the angle of incidence on the structure of the flow past a prismatic body are experimentally investigated, both quantitatively in the form of wind tunnel measurement and qualitatively in the form of water tunnel flow visualization. Four cross-sectional shapes with identical upstream facing side and streamwise dimension were chosen in the present investigation. They were a square, two trapeziums, and a triangle. By studying the structure of the flow associated with the above-mentioned shapes, a systematic investigation in which the effects of the afterbody are gradually reduced can be carried out. From the measured magnitude and frequency of the fluctuating aerodynamic forces, the main effect of differences in afterbody shape is the proximity of the two separated shear layers to each other and to their corresponding side faces. This proximity difference, in turn, results in differences in the normal force, the gradient of its variation with the angle of incidence, and, hence, the susceptibility of the shape (with respect) to flow-induced oscillation. Also, due to the difference in interaction between the separated shear layers and the sides of the prismatic structure, the vortex formation length, the base pressure and, hence, the axial force, the rate at which vortices are shed and, hence, the frequency of the aerodynamic loading on the structure and the longitudinal vortex spacing also vary. Changes in the angle of incidence can be viewed as similar to changes in the afterbody shape and, hence, its effects are similar to those caused by changing the afterbody shape. Experiments show that no cross-sectional shape is absolutely stable to galloping oscillation because a shape that is stable to galloping oscillation at a certain mean angle of incidence may become unstable at a different mean angle of incidence. By idealising the vortex wake as two parallel rows of vortices, various vortex street parameters, including the vortex spacing ratio and the strength of each vortex in the wake, are estimated. They show a dependence on the afterbody shape and the angle of incidence.

References (19)

C.W. Knisely
Strouhal numbers of rectangular cylinders at incidence, A review and new data
J. Fluid Struc.
(1990)
P.W. Bearman et al.
Investigation of the aerodynamic instability of a square-section cylinder by forced oscillation
J. Fluid Struc.
(1988)
S.C. Luo et al.
Prediction of fluctuating lift on a transversely oscillating square-section cylinder
J. Fluid Struc.
(1990)
P.W. Bearman et al.
An investigation of flow around rectangular cylinders
Aero. Quart.
(1972)
B.E. Lee
The surface pressure field experienced by a two-dimensional square prism
Central Electricity Generating Board, RD/L/N17/74
(1974)
E.D. Obasaju
An investigation of the effects of incidence on the flow around a square section cylinder
Aero. Quart.
(1983)
B.J. Vickery
Fluctuating lift and drag on a long cylinder of square cross-section in a smooth and turbulent stream
J. Fluid Mech.
(1966)
E.C. Maskell
A theory of the blockage effects on bluff bodies and stalled wings in a closed wind tunnel
RAE Aero Report 2685
(1963)
S.C. Luo et al.
Correction of distortion in fluctuating pressure signal caused by long pressure transmitting PVC tubing
J. Inst. Eng. Singapore
(1991)

There are more references available in the full text version of this article.

Cited by (142)

Deciphering unknown upstream conditions and downstream turbulent flow evolution via neural networks
2024, Ocean Engineering
This study utilized a Convolutional Neural Network (CNN) trained via computational fluid dynamics (CFD) data that was further processed with continuous wavelet transform (CWT). The goal was to examine whether a deep learning algorithm could learn the features left in a flow by upstream bluff bodies. The study aimed to understand whether the trained algorithm could deduce the geometry of an upstream bluff body by analyzing downstream flow data. The scope of the work also included exploring the potential of the trained CNN to understand how turbulent flow develops in the wake of these bluff bodies. We investigated three bluff bodies (a circular cylinder, a square prism, and a triangular prism) by employing large-eddy simulations to produce a time series of velocities and analyzing them using CWT to create two-dimensional contours, representing the velocity data’s time and frequency domain. These contours were used to train our adapted GoogLeNet while we optimized hyperparameters via Bayesian Optimization per each training. Training occurred in the near wake. The model accurately identified the bluff body within this region when tested with unknown data. The study reveals that features the model identifies in the near wake of a square-shaped bluff body persist into the far and mid wake. However, as flow transitions from a circle’s near wake to its far wake, its features change and become more similar to those identified in the square’s wake. The flow downwind of the triangle experiences similar developments, but transformations are less severe than in the circle.
Numerical study on the aerodynamic characteristics and flow field of two tandem tapered square cylinders with different spacing ratios
2024, Ocean Engineering
Three-dimensional (3-D) large eddy simulations (LES) are carried out to explore the influence of spacing ratio G/D on the flow structures and aerodynamic interference mechanism of two tandem square cylinders with and without tapered modification (taper ratio ξ = 0 % and 5 %) at Reynolds number Re = 2 × 10³. Different spacing ratios G/D from 1.4 to 6.0 are considered, where G is the cylinder center-to-center distance and D is the cylinder width. The flow structures, wind pressure distributions, force coefficients, and power spectral density of the two cylinders are comprehensively analyzed and discussed. The mathematical relationship between spacing ratio and force coefficients is established, which can provide theoretical reference for the design and construction of tandem structures. The results indicate that the flow structures and aerodynamic forces are very sensitive to the spacing and taper ratios. The flow structures of the two cylinders can be divided into three flow regimes based on G/D: single body, reattachment, and co-shedding regimes. As the taper ratio increases, the cross-sectional width of the two cylinders gradually narrows along the height, which in turn weakens the interference effect between the two cylinders and decreases the range of the critical spacing ratio. The width of the shear layer becomes gradually narrower and closer to the surfaces of the two cylinders, resulting in a higher frequency and lower energy of vortex shedding. In addition, the mean and fluctuating wind pressure coefficients, the mean force coefficients in the along-wind direction, and the fluctuating coefficients all decrease with the increase in taper ratio, which is attributed to the reduction of the periodicity and consistency of vortex shedding. Meanwhile, there are weaker mean and fluctuating wind pressure and force coefficients for the two cylinders under the reattachment flow regime. Therefore, in the design and construction of tandem structures for ocean engineering, it should be considered to improve the wind resistance performance by making the structures in the reattachment flow regime.
Flow-induced reconfiguration and cross-flow vibrations of an elastic plate and implications to energy harvesting
2023, Journal of Fluids and Structures
We numerically study flow-induced vibrations (FIV) of an elastic cantilevered plate in a cross-flow configuration. The plate is kept upright in an open domain with a fixed bottom end. Such a configuration eliminates energy losses in the wall boundary. Due to allowed vortex shedding from its bottom end, the resulting novel dynamics of the fluid-structure interaction (FSI) system is explored. An in-house sharp-interface immersed boundary method-based flow solver, coupled with a Saint-Venant Kirchhoff material model-based open-source finite element solver, is employed. Two sets of simulations were carried out in two-dimensional Cartesian coordinates at Reynolds number of 100 for a wide range of reduced velocity ( $U_{R}$ ), by performing a parametric sweep of dimensionless Young’s modulus ( $E$ ) and mass ratio ( $M$ ). In general, FIV characteristics of the plate are similar to the transverse vortex-induced vibration of an elastically-mounted cylinder. The plate deforms to a curved mean position depending on $E$ and $M$ and exhibits angular oscillations. In particular, the following FIV regimes are obtained with increasing $U_{R}$ : initial excitation, lock-in with the first mode, desynchronization after the first lock-in, lock-in with the second mode, and desynchronization after the second lock-in. During lock-in, the plate oscillation and vortex shedding frequency are closer to the first or second mode natural frequency of plate. A larger angular amplitude and increased energy exchange between the structure and fluid characterize the lock-in. We quantify the modal contributions of Euler-Bernoulli modes in the plate’s vibration response with a curved mean position. The spatiotemporal variation of energy exchange between the fluid and plate is analyzed to understand the observed plate dynamics. The flow physics of the wake is discussed using wake patterns, vortex formation length, and vortex strength. Drag over the plate reduces due to flow-induced reconfiguration and strongly correlates with these parameters. Lastly, based on the spatial distribution of strain energy density over the plate, we present a potential design for an ambient fluid energy harvester to harness the plate’s vibration energy with optimized piezoelectric patching. The optimum location and height of a piezoelectric patch on the plate for different cases are reported.
Self-adaptive turbulence eddy simulation of flow control for drag reduction around a square cylinder with an upstream rod
2023, European Journal of Mechanics, B/Fluids
The use of an upstream circular rod to control the flow around a downstream square cylinder is found to efficiently reduce the drag of the square cylinder. The complex flow characteristics and mechanism of the rod-square system in tandem arrangement as a passive flow control method for various centre-to- centre gap ratios (L/D) are investigated by numerical simulation. Turbulence modelling of the rod-square cylinder system is challenging. To select a suitable turbulence modelling, the recently developed Self-Adaptive Turbulence Eddy Simulations (SATES), as well as IDDES (Improved Delayed Detached Eddy Simulation) and SBES (Stress Blended Eddy Simulation) are first assessed for single circular and single square cylinder flow test cases. The SATES method performs best among the three models for bluff body flow simulation and is thus used in the drag flow control study. For the rod-square flow control system, the Reynolds number is 34000 based on freestream velocity $U_{0}$ and the edge length of the square cylinder D. The diameter of the control rod is kept constant at d/D = 0.18. The flow characteristics and mechanism are explored in detail, varying the rod and square cylinder distance of L/D = 1.5, 2.0, 2.5and 3.0. According to the absence or presence of vortex shedding from the upstream rod cylinder, two flow patterns (pattern I and pattern II) are observed. Large drag reduction is observed for all the simulation cases the maximum drag reduction is approximately 63% with L/D = 2.0, and the minimum drag reduction approximately 53% with L/D = 3.0. The secondary lock-frequency, which presents as pattern II, is caused by the excitation of upstream vortices. It is found that the side recirculation is associated with the wake recirculation length of the square cylinder, which is similar to the elongated cylinder in the flow pattern I. The flow mechanism of suppression of the vortices from the rod can be attributed to the effective diffusion of vorticity in the separating shear layer caused by the presence of the front wall of the square cylinder.
Fluctuating forces on bluff bodies and their relationships with flow structures
2023, Ocean Engineering
Koopman analysis by the dynamic mode decomposition in wind engineering
2023, Journal of Wind Engineering and Industrial Aerodynamics
The Koopman theory, a concept to globally model nonlinear signals by a linear Hamiltonian, has been at the frontier of fluid mechanics research for the last decade. Wind engineering research may well benefit from the new opportunities and insights into turbulence and fluid-structure interactions (FSI), but the principal Koopman algorithm, the Dynamic Mode Decomposition (DMD), has only been preliminarily applied in the field. This review aims to promote the understanding and practice of the DMD and Koopman analysis through a wind engineering-oriented perspective. First, a thorough Koopman literature review has been conducted in the Journal of Wind Engineering and Industrial Aerodynamics, the field's prime journal, to assess the current research status. Second, the DMD's inseparable connection to four fundamental mathematical principles, namely the Koopman theory, the Fourier and Laplace transform, the Proper Orthogonal Decomposition (POD), and machine learning, has been elucidated. Third, the core DMD algorithm has been presented and dissected, sparking a user guide and some discussions on its spectral implications. Last, several key topics in wind tunnel experimentation and numerical simulations have been discussed with practice-oriented recommendations and suggested DMD variants; the topics include noise-contamination, non-uniform sample domain, data sparsity, observable choice, input sample range and resolution, FSI decoupling, mean-subtraction, and truncation. Some discussions on the continuity assumption, coefficient of weight, reduced-order modeling, moving boundaries, compressed sensing, and fluid phenomenology have also been appended.

View all citing articles on Scopus

View full text

Effects of incidence and afterbody shape on flow past bluff cylinders

Abstract

J. Fluid Struc.

J. Fluid Struc.

J. Fluid Struc.

An investigation of flow around rectangular cylinders

Aero. Quart.

The surface pressure field experienced by a two-dimensional square prism

Central Electricity Generating Board, RD/L/N17/74

An investigation of the effects of incidence on the flow around a square section cylinder

Aero. Quart.

Fluctuating lift and drag on a long cylinder of square cross-section in a smooth and turbulent stream

J. Fluid Mech.

A theory of the blockage effects on bluff bodies and stalled wings in a closed wind tunnel

RAE Aero Report 2685

Correction of distortion in fluctuating pressure signal caused by long pressure transmitting PVC tubing

J. Inst. Eng. Singapore