Abstract
The purpose of this paper is to present a study of elastoplastic deformation in an isotropic material disk with shaft subjected to variable density and load using Seth’s transition theory. This theory includes classical macroscopic solving problems in plasticity, creep and relaxation and assumes semi-empirical yield conditions. It has been observed that the values of angular speed decreased with increases in the values of the density parameter for an incompressible material. Radial stress has the maximum value at the internal surface of the rotating disk made of incompressible material (i.e., rubber) as compared to the compressible materials (i.e., saturated clay and copper).
Similar content being viewed by others
Abbreviations
- \( \hat{\varepsilon }_{ij} \) :
-
Principal finite strain components
- \( K_{1} \), \( K_{2} \) :
-
Constants of integration
- E :
-
Young’s modulus
- \( r_{i} ,r_{0} \) :
-
Inner and outer radii of the disk, respectively
- \( c \) :
-
Compressibility factor
- \( \rho \) :
-
Density of material
- \( u,v,w \) :
-
Displacement components
- \( r,\theta ,z \) :
-
Radial, circumferential and axial directions
- \( \omega \) :
-
Angular velocity of rotation
- \( \delta_{ij} \) :
-
Kronecker’s delta
- Y :
-
Yield stress
- v :
-
Poisson’s ratio
- l 0 :
-
Mechanical load
- \( \lambda ,\mu \) :
-
Lame’s constants
- \( \tau_{ij} ,\varepsilon_{ij} \) :
-
Stress and strain components
References
Sokolnikoff IS (1950) Mathematical theory of elasticity, 2nd edn. McGraw-Hill Book Company, New York, pp 70–71
Timoshenko S, Goodier JN (1970) Theory of elasticity. McGraw-Hill Book Company, New York
Johnson W, Mellor PB (1978) Engineering plasticity. Von Nastrand Reinhold, London
Chakrabarty J (1998) Theory of plasticity. McGraw-Hill Book Company, New York
Reddy TY, Srinath H (1974) Elastic stresses in a rotating anisotropic annular disk of variable thickness and variable density. Int J Mech Sci 16(2):85–89
Parmaksizoglu C, Guven U (1998) Plastic stress distribution in a rotating disk with rigid inclusion under a radial temperature gradient. Mech Struct Mach 26(1):9–20
Gǘven U (1998) Elastic–plastic stress distribution in a rotating hyperbolic disk with rigid inclusion. Int J Mech Sci 40(1):97–109
Gǘven U (1999) Elastic–plastic rotating disk with rigid inclusion. Mech Struct Mach 27(1):117–128
You LH, Tang YY, Zhang JJ, Zheng CY (2000) Numerical analysis of elastic–plastic rotating disks with arbitrary variable thickness and density. Int J Solids Struct 37(52):7809–7820
Alexandrova N, Alexandrov S (2005) Elastic–plastic stress distribution in a rotating annular disk, mechanics based design of structures and machines. Int J 32(1):1–15
Gupta SK, Thakur P (2007) Thermo elastic–plastic transition in a thin rotating disc with inclusion. Therm Sci 11(1):103–118
Thakur P (2010) Elastic–plastic transition stresses in a thin rotating disc with rigid inclusion by infinitesimal deformation under steady-state temperature. Therm Sci 14(1):209–219
Rahimi GH, Mohammad A (2013) Linear thermoelastic analysis of a functionally graded (FG) rotating disk with different boundary conditions using adomian’s decomposition method. Sci Res Essays 8(21):858–866
Yang X-J (2019) New general calculi with respect to another functions applied to describe the newton-like dashpot models in anomalous viscoelasticity. Therm Sci 23(6B):3751–3757
Yang X-J (2019) New mathematical models in anomalous viscoelasticity from the derivative with respect to another function view point. Therm Sci 23(3A):1555–1561
Seth BR (1962) Transition theory of elastic–plastic deformation, creep and relaxation. Nature 195:896–897
Seth BR (1966) Measure concept in mechanics. Int J Non-linear Mech 1(1):35–40
Thakur P, Sethi M (2020) Elasto-plastic deformation in an orthotropic spherical shell subjected to temperature gradient. Math Mech Solids USA 25(1):26–34
Thakur P, Sethi M (2020) Creep deformation and stress analysis in a transversely material disc subjected to rigid shaft. Math Mech Solids USA 25(1):17–25
Swainger KH (1956) Analysis of deformation, Chapman & Hall, London; Macmillan, USA. Fluidity 3:67–68
Funding
This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors certify that they have no affiliations with or involvement in any organisation or entity with any financial or nonfinancial interest in the subject matter or materials discussed in this manuscript.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sethi, M., Thakur, P. Elastoplastic deformation in an isotropic material disk with shaft subjected to load and variable density. J Rubber Res 23, 69–78 (2020). https://doi.org/10.1007/s42464-020-00038-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42464-020-00038-8