Abstract
Susceptibility and morphological characteristics of crevice corrosion for SS316, SS904L, SS254sMo and SS2507 in the simulated low-temperature multi-effect distillation environment were investigated by cyclic polarization test, scanning electron microscope and laser microscope. The results show that the crevice corrosion resistance of four kinds of stainless steel is ranked as SS254sMo ≈ SS2507 > SS316 > SS904L. There are “cover” structures over the edge of active crevice corrosion regions of SS904L, SS254sMo and SS2507, but SS316 is an exception. Galvanic corrosion characteristics appeared in the crevice of duplex supper stainless steel SS2507.
Similar content being viewed by others
References
N. Ghaffour, Desalin. Water Treat. 5, 48 (2009)
S.S. Xin, M.C. Li, Corros. Sci. 81, 96 (2014)
K.V. Reddy, N. Ghaffour, Desalination 205, 340 (2007)
N.M. Wade, Desalination 93, 343 (1993)
M. Al-Shammiri, M. Safar, Desalination 126, 45 (1999)
L.F. Greenlee, D.F. Lawler, B.D. Freeman, B. Marrot, P. Moulin, Water Res. 43, 2317 (2009)
J.S. Lee, K. Fushimi, T. Nakanishi, Y. Hasegawa, Y.S. Park, Corros. Sci. 89, 111 (2014)
S. Nagarajan, N. Rajendran, Corros. Sci. 51, 217 (2009)
S.T. Kim, S.Y. Kim, I.S. Lee, Y.S. Park, M.C. Shin, Y.S. Kim, Corros. Sci. 53, 2611 (2011)
D.H. Kang, H.W. Lee, Corros. Sci. 74, 369 (2013)
M. Barteri, M.G. Mecozzi, I. Nembrini, Duplex Stainless Steels 94, Glasgow, Scotland, vol. 3, 1994, p. 60
Z.Y. Zhang, H. Zhao, H.Z. Zhang, J. Hua, J. Jina, Corros. Sci. 22, 121 (2017)
W.T. Tsai, J.R. Chen, Corros. Sci. 49, 3659 (2007)
Y. Han, H. Wu, W. Zhang, D.N. Zou, G.W. Liu, G.J. Qiao, Mater. Des. 69, 230 (2015)
J.W. Oldfield, B. Todd, Desalination 108, 27 (1996)
A.U. Mahk, I. Andijani, A.M. Jamaluddin, S. Ahmed, Desalination 171, 289 (2005)
B.P. Cai, Y.H. Liu, X.J. Tian, F. Wang, H. Li, R.J. Ji, Corros. Sci. 52, 3235 (2010)
ASTM Standard G78, Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloy in Seawater and Other Chloride-Containing Aqueous Environments (2007)
H. Gerengi, K. Darowicki, G. Bereket, P. Slepski, Corros. Sci. 51, 2573 (2009)
ASTM Standard G61, Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys (2009)
X. He, T. Mintz, JOM 60, 44 (2008)
S. Wang, R.C. Newman, Corrosion 60, 448 (2004)
W.S. Tait, An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists (Pairodacs Publications, Wisconsin, 1994), p. 26
K.J. Evabs, A. Yilmaz, S.D. Day, JOM 57, 56 (2005)
R.M. Carranza, JOM 60, 58 (2008)
J.S. Lee, M.L. Reed, R.G. Kelly, J. Electrochem. Soc. 151, B423 (2004)
M.I. Abdulsalam, Corros. Sci. 47, 1336 (2005)
M.I. Abdulsalam, H.W. Pickering, Corros. Sci. 41, 351 (1999)
P.C. Pistorius, G.T. Burstein, Philos. Trans.: Phys. Sci. Eng. 341, 531 (1992)
C. Pan, L. Liu, Y. Li, F.H. Wang, Corros. Sci. 73, 32 (2013)
Y.Z. Yang, Y.M. Jiang, J. Li, Corros. Sci. 76, 163 (2013)
L. Zhang, W. Zhang, Y. Jiang, B. Deng, D. Sun, J. Li, Electrochim. Acta 54, 5387 (2009)
N. Rajendran, S. Rajeswari, J. Mater. Eng. Perform. 5, 46 (1996)
G. Latha, N. Rajendran, S. Rajeswari, J. Mater. Eng. Perform. 6, 743 (1997)
A.R. Brooks, C.R. Clayton, K. Doss, Y.C. Lu, J. Electrochem. Soc. 133, 2459 (1986)
C.R. Clayton, Y.C. Lu, Corros. Sci. 29, 881 (1989)
M.A. Ameer, A.M. Fekry, F. El-Taib, Heakal. Electrochim. Acta 50, 43 (2004)
N. Boucherit, A. Hugot-le Goff, S. Joiret, Corrosion 48, 569 (1992)
W.J. Tobler, S. Virtanen, Corros. Sci. 48, 1585 (2006)
M. Bastidas, C.L. Torres, E. Cano, J.L. Polo, Corros. Sci. 44, 625 (2002)
C.R. Clayton, Y.C. Lu, J. Electrochem. Soc. 133, 2465 (1986)
I. Olefjord, B.O. Elfstrom, Corrosion 38, 46 (1982)
P. Marcus, M.E. Bussell, Appl. Surf. Sci. 59, 7 (1992)
A. Sadough Vanini, J.P. Audouard, P. Marcus, Corros. Sci. 36, 825 (1994)
A. Swift, A.G. Paul, J.C. Vickerman, Surf. Interface Anal. 20, 27 (1993)
R.D. Willenbruch, C.R. Clayton, M. Oversluizen, D. Kim, Y.C. Lu, Corros. Sci. 31, 179 (1990)
J.J. Qi, B.Y. Huang, Z.H. Wang, H. Ding, J.L. Xi, W.T. Fu, J. Mater. Sci. Technol. 33, 1621 (2017)
Acknowledgements
This work was financially supported by the National High Technology Research and Development Program (“863” Program) of China (No. 2015AA034301) and the National Natural Science Foundation of China (No. 51501201).
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Wang, CG., Li, XF., Wei, J. et al. Crevice Corrosion of Several Supper Stainless Steels in the Simulated LT-MED Environment. Acta Metall. Sin. (Engl. Lett.) 31, 1137–1147 (2018). https://doi.org/10.1007/s40195-018-0728-2
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-018-0728-2