Literaturhinweise
Greb, C.; Schnabel, A.; Kruse, F.; Linke, M.; Gries, T.: Cost Efficient Preform Production for Complex FRP Structures. Sampe Conference 2011, Long Beach, California, USA, Mai 2011
Linke, M.; Greb, C.; Klingele, J.; Schnabel, A.; Gries, T.: Automating Textile Preforming Technology for Mass Production of Fibre-reinforced Polymer (FRP) composites. In: Shishoo, R. (Ed.): The Global Textile and Clothing Industry: Technological Advances and Future Challenges. Oxford: Woodhead, 2012, S. 171–195
Hopmann, C.; Fischer, K.; Bastian, R.: Analysis of the Production of Composite Parts with Functional Elements Using the Gap Impregnation Process. 28th Annual Meeting of the Polymer Processing Society, Pattaya, Thailand, 11 to 15 December 2012
Hopmann, C.; Pöhler, M.: Resin Spray Prepregging — Structural Parts with Non-foaming Polyurethane Matrix. Sampe Conference 2012, Baltimore, Maryland, USA, Mai 2012
Michaeli, W.; Winkelmann, L.; Pöhler, M.; Wessels, J.: New Process Technology for High-volume Production of Composites. In: Journal of Polymer Engineering (2011), Nr. 4, S. 63–68
Danke
Die vorgestellten Arbeiten wurden von der Deutschen Forschungsgemeinschaft (DFG) im Rahmen der Forschergruppe 860 finanziell gefördert. Ihr gilt der ausdrückliche Dank der Autoren.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hopmann, C., Bastian, R., Karatzias, C. et al. Faserverstärkte Kunststoffe Tauglich für die Grossserie. ATZ Automobiltech Z 115, 262–266 (2013). https://doi.org/10.1007/s35148-013-0080-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s35148-013-0080-9