References
Properties and selection: irons, steels, and high-performance alloys. in Metals Handbook, 10th edn. (ASM International, Materials Park, 1990)
G. Henkel et al., Information on Passivation Layer Phenomena for Austenitic Stainless Steel Alloys, Henkel Technical Bulletin, Essay 45/Rev.00
H. Berns, Met. Sci. Heat Treat. 49(11–12), 578–580 (2007)
T. Bell, Surf. Eng. 18(6), 415–422 (2002)
T. Bell, Int. Heat Treat. Surf. Eng. 1(4), 146–151 (2007)
G.E. Totten et al., J. ASTM Int. 9(2), 1–11 (2012)
H.J. Spies et al., Surf. Eng. 18(6), 459–461 (2002)
K.L. Dahm et al., Proc. Inst. Mech. Eng. 214(4), 181–198 (2000)
Y. Sun et al., Heat Treat. Met. 1, 9–16 (1999)
H. Dong, Int. Mater. Rev. 56(2), 65–98 (2010)
V.G. Gavriljuk et al., High Nitrogen Steels (Springer, Berlin, 1999)
T. Czerwiec, Plasma Process. Polym. 6, 401–409 (2009)
T.L. Christiansen et al., Surf. Eng. 26(4), 242–247 (2010)
F.A.P. Fernandes et al., Heat Treat. Prog. 8, 41–43 (2008)
X.Y. Li et al., Mater. Sci. Technol. 19, 1427–1434 (2003)
J. Buhagiar et al., Surf. Eng. 29(4), 313–317 (2007)
C. Allen et al., Wear 254, 1106–1112 (2003)
J.C. Stinville et al., Surf. Coat. Technol. 204, 1947–1951 (2010)
C.X. Li et al., Wear 256, 1144–1152 (2004)
Y. Sun et al., Wear 253, 689–693 (2002)
P.A. Dearnley et al., Wear 256, 491–499 (2004)
C.X. Li et al., Corros. Sci. 46, 1527–1547 (2004)
V.G. Gavriljuk, ISIJ Int. 36, 738–745 (1996)
A. Fossati et al., Corros. Sci. 48, 1513–1527 (2005)
T. Christiansen et al., Z. Metall. 97, 79–88 (2006)
Heat Treating, Volume 4, ASM Handbook (ASM International, Materials Park, 1991)
C.X. Li et al., Heat Treat. Met. 1, 1–7 (2003)
C.X. Li et al., Surf. Eng. 18(3), 174–181 (2002)
C.X. Li, Surf. Eng. 26(1–2), 135–141 (2010)
C. Zhao et al., Surf. Eng. 24(3), 188–192 (2008)
J.M. Priest et al., Thin Solid Films 345, 113–118 (1999)
J.A. García et al., Vacuum 85, 1125–1129 (2011)
C. Blawert et al., Surf. Coat. Technol. 103–104, 240–247 (1998)
G.A. Collins et al., Surf. Coat. Technol. 103–104, 212–217 (1998)
D. Pye, Practical Nitriding and Ferritic Nitrocarburizing (ASM International, Materials Park, 2003)
T. Bell et al., Surf. Eng. 10(2), 123–128 (1994)
J. Baranowska et al., Wear 263, 669–673 (2007)
Method of Nitriding Austenitic Stainless Steel, Patent EP 0588458, 1993
Selective Case Hardening Processes at Low Temperature, U.S. Patent 6165597A, 1998
C. Collins et al., Adv. Mater. Process. 164, 32–33 (2006)
Method of Producing Outer Coating Layers on Heat and Corrosion Resistant Austenitic Steels, Patent EP 0248431B1, 1987
Low Temperature Case Hardening Processes, Patent EP 1095170, 1999
Case Hardening of Stainless Steel, Patent WO 2004/007789 A1, 2003
Method for Activating Surface of Metal Member, Patent EP 1707646 B1, 2005
Method for Surface Treatment of Metal Material, Patent EP 1712658 A1, 2005
Carburizing in Hydrocarbon Gas, Patent WO 2006/136166 A1, 2006
A Method of Activating an Article of Passive Ferrous or Non-Ferrous Metal prior to Carburising, Nitriding and/or Nitrocarburizing, Patent WO 2011/009463 A1, 2011
T.L. Christiansen et al., Surf. Eng. 27(8), 602–608 (2011)
E.J. Mittemeijer et al., Surf. Eng. 12(2), 152–162 (1996)
T.L. Christiansen et al., Int. J. Mater. Res. 100, 1361–1377 (2009)
T.L. Christiansen et al., Struers J. Materialogr. 9, 204 (2006)
F. Schmalt et al., in Proceedings from the First International Surface Engineering Congress and the 13th IFHTSE Congress, Columbus, 7–10 Oct 2002
W. Liang, Appl. Surf. Sci. 211, 308–314 (2003)
J.E. Japka, Met. Prog. 123(2), 27–33 (1983)
A. Triwiyantoa et al., Int. J. Mech. Mater. Eng. (IJMME) 4(2), 197–203 (2009)
J. Wang et al., ISIJ Int. 52(6), 1118–1123 (2012)
A.S. Hamdya et al., Mater. Chem. Phys. 126, 507–514 (2011)
A Guide to the Safe Use of Molten Salt Baths (Park Thermal International Corp., Buffalo, 1996)
K. Funatani, Met. Sci. Heat Treat. 46(7–8), 277–281 (2004)
T. Kumar et al., in International Symposium of Research Students on Materials Science and Engineering, 2002–2004
Author information
Authors and Affiliations
Corresponding author
Additional information
This is a preview chapter from the recently published volume Heat Treating of Irons and Steels, Volume 4D, ASM Handbook, Jon Dossett and George Totten, editors.
Rights and permissions
About this article
Cite this article
Casteletti, L.C., Neto, A.L. & Totten, G.E. Nitriding of Stainless Steels. Metallogr. Microstruct. Anal. 3, 477–508 (2014). https://doi.org/10.1007/s13632-014-0170-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13632-014-0170-4