Abstract
We report on a method for fabricating microball lens arrays with high outcoupling efficiency based on the replica molding process, which involves casting liquid polymethylmethacrylate (PMMA) into concave microball lens molds. Concave microball lens molds were fabricated by casting a poly-dimethyl-siloxane (PDMS) mixture onto a monolayer microsphere template, which was prepared by spin-coating an aqueous suspension of polystyrene spheres. Microball lenses were fabricated using microspheres with a diameter of 90 µm. After attaching the microball lens array to organic light-emitting diodes (OLEDs), the luminance was enhanced by approximately 108%.
Similar content being viewed by others
References
S. Möller and S. R. Forrest, J. Appl. Phys. 91, 3324 (2002).
Y. Sun and S. R. Forrest, J. App. Phys. 100, 073106 (2006).
K. Hong and J.-L. Lee, Electron. Mater. Lett. 7, 77 (2011).
T. Yamasaki, K. Sumioka, and T. Tsutsui, Appl. Phys. Lett. 76, 1243 (2000).
B. J. Matterson, J. M. Lupton, A. F. Safonov., M. G. Salt, W. L. Barnes, and I. D. W. Samuel, Adv. Mater. 13, 123 (2001).
Y.-J. Lee, S.-H. Kim, J. Huh, G.-H. Kim, Y.-H. Lee, S.-H. Cho, Y.-C. Kim, and Y. R. Do, Appl. Phys. Lett. 82, 3779 (2003).
L. Lin, T. K. Shia, and C.-J. Chiu, J. Micromech. Microeng. 10, 395 (2000).
M.-K. Wei, J.-H. Lee, H.-Y. Lin, Y.-H. Ho, K.-Y. Chen, C.-C. Lin, C.-F. Wu, H.-Y. Lin, J.-H. Tsai, and T.-C. Wu, J. Opt. A: Pure Appl. Opt. 10, 055302 (2008).
C. K. Chung and Y. Z. Hong, Microsyst. Technol. 13, 523 (2007).
W.-K. Huang, C.-J. Ko, and F.-C. Chen, Microelectron. Eng. 83, 1333 (2006).
H.-Y. Lin, Y.-H. Ho, J.-H. Lee, K.-Y. Chen, J.-H. Fang, S.-C. Hsu, M.-K. Wei, H.-Y. Lin, J.-H. Tsai, and T.-C. Wu, Opt. Exp. 16, 11046 (2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, H.S., Kim, C.K. & Jang, H.W. Fabrication of a microball lens array for OLEDs fabricated using a monolayer microsphere template. Electron. Mater. Lett. 9 (Suppl 1), 39–42 (2013). https://doi.org/10.1007/s13391-013-3174-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13391-013-3174-3