Abstract
We report the use of a femtosecond pulse laser as an interferometric low-coherent light source for precision surface-profile metrology. Unequal-path non-symmetric low-coherence interferometer is configured to measure large-sized optics with a small reference mirror; such measurement is feasible only with ultra-short mode-locked pulses with periodic temporal low-coherence and high spatial coherence. The temporal delay between pulses from the reference and the target optics is precisely scanned for phase shifting interferometry by tuning the repetition rate of femtosecond pulses referenced to the Rb atomic clock of a time standard. This method enables us to perform high-precision surface measurements without parasitic fringes being produced by stray reflection and removes all mechanical scanning parts from the interferometer.
References
Wyant, J. C., “Interferometric optical metrology: basic system and principles,” Laser Focus, pp. 65–71, 1981.
North-Morris, M. B., Van Delden, J., and Wyant, J. C., “Phaseshifting birefringent scatterplate interferometer,” Appl. Opt., Vol. 41, pp. 668–677, 2002.
Caber, P. J., “Interferometric profiler for rough surfaces,” Appl. Opt., Vol. 32, pp. 3438–3441, 1993.
Park, J. and Kim, S.-W., “Active autofocus control using source dithering technique based on fibre-optic confocal principle,” Int. J. Precis. Eng. Manuf., Vol. 12, pp. 733–736, 2011.
Kihm, H. and Kim, S.-W., “Fiber-diffraction interferometer for vibration desensitization,” Opt. Lett., Vol. 30, pp. 2059–2061, 2005.
de Groot, P. and Deck, L., “High-speed noncontact profiler based on scanning white-light interferometry,” Appl. Opt., Vol. 33, pp. 7334–7338, 1994.
Kim, S.-W. and Kim, G.-H., “Thickness-profile measurement of transparent thin-film layers by white-light scanning interferometry,” Appl. Opt., Vol. 38, pp. 5968–5973, 1999.
Ghim, Y.-S. and Kim, S.-W., “Fast, precise, tomographic measurements of thin films,” Appl. Phys. Lett., Vol. 91, Paper No. 091903, 2007.
Schwider, J., “White-light Fizeau interferometer,” Appl. Opt., Vol. 36, pp. 1433–1437, 1997.
Ai, C., “Multimode laser fizeau interferometer for measuring the surface of a thin transparent plat,” Appl. Opt., Vol. 36, pp. 8135–8138, 1997.
Harasaki, A., Schmit, J., and Wyant, J. C., “Improved verticalscanning interferometry,” Appl. Opt., Vol. 39, pp. 2107–2115, 2000.
Kim, S.-W., “Combs rule,” Nat. Photonics, Vol. 3, pp. 313–314, 2009.
Newbury, N. R., “Searching for applications with a fine-tooth comb,” Nat. Photonics, Vol. 5, pp. 186–188, 2011.
Ye, J., “Absolute measurement of long, arbitrary distance to less than an optical fringe,” Opt. Lett., Vol. 29, pp. 1153–1155, 2004.
Jin, J., Kim, Y.-J., Kim, Y., Kim, S.-W., and Kang, C.-S., “Absolute length calibration of gauge blocks using optical comb of a femtosecond pulse laser,” Opt. Express, Vol. 14, pp. 5986–5974, 2006.
Jin, J., Kim, Y.-J., Kim, Y., and Kim, S.-W., “Absolute distance measurements using the optical comb of a femtosecond pulse laser,” Int. J. Precis. Eng. Manuf., Vol. 8, pp. 22–26, 2007.
Joo, K.-N. and Kim, S.-W., “Absolute distance measurement by dispersive interferometry using a femotsecond pulse laser,” Opt. Express, Vol. 14, pp. 5954–5960, 2006.
Schuhler, N., Salvade, Y., Leveque, S., Dandliker, R., and Holzwarth, R., “Frequency comb-referenced two-wavelength source for absolute distance measurement,” Opt. Lett., Vol. 31, pp. 3101–3103, 2006.
Joo, K.-N., Kim, Y., and Kim, S.-W., “Distance measurements by combined method based on a femtosecond pulse laser,” Opt. Express, Vol. 16, pp. 19799–19806, 2008.
Cui, M., Schouten, R. N., Bhattacharya, N., and van den Berg, S. A., “Experimental demonstration of distance measurement with a frequency comb laser,” J. Eur. Opt. Soc., Vol. Rapid Publ. 3, pp. 08003, 2008.
Hyun, S., Kim, Y.-J., Kim, Y., Jin, J., and Kim, S.-W., “Absolute length measurement with the frequency comb of a femtosecond laser,” Meas. Sci. Technol. Vol. 20, Paper No. 095302, 2009.
Coddington, I., Swann, W. C., Nenadovic, L., and Newbury, N. R., “Rapid and precise absolute distance measurements at long range,” Nat. Photonics, Vol. 3, pp. 351–356, 2009.
Lee, J., Kim, Y. -J., Lee, K., Lee, S., and Kim, S. -W., “Time-offlight measurement using femtosecond light pulses,” Nat. Photonics, Vol. 4, pp. 716–720, 2010.
Lee, J., Lee, K., Lee, S., Kim, S.-W., and Kim, Y.-J., “High precision laser ranging by time-of-flight measurement of femtosecond pulses,” Meas. Sci. Technol., Vol. 23, Paper No. 065203, 2012.
Van den Berg, S. A., Persijn, S. T., Kok, G. J. P., Zeitouny, M. G., and Bhattacharya, N., “Many-wavelength interferometry with thousands of lasers for absolute distance measurement,” Phys. Rev. Lett., Vol. 108, Paper No. 183901, 2012.
Shetty, D., Ali, A., and Hill, J., “Optical instrumentation for vibration measurement and monitoring,” Int. J. Precis. Eng. Manuf., Vol. 12, pp. 405–411, 2011.
Oh, J. S. and Kim, S.-W., “Femtosecond laser pulses for surfaceprofile metrology,” Opt. Lett., Vol. 30, pp. 2650–2652, 2005.
Wei, D., Takahashi, S., Takamasu, K., and Matsumoto, H., “Analysis of the temporal coherence function of a femtosecond optical frequency comb,” Opt. Express, Vol. 17, pp. 7011–7018, 2009.
Kim, Y.-J., Jin, J., Kim, Y., Hyun, S., and Kim, S.-W., “A widerange optical frequency generator based on the frequency comb of a femtosecond laser,” Opt. Express, Vol. 16, pp. 258–264, 2008.
Kong, I. B. and Kim, S.-W., “General Algorithm of Phase-Shifting Interferometry by Iterative Least Square Fitting,” Opt. Eng., Vol. 34, pp. 183–188, 1995.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Joo, WD., Park, J., Kim, S. et al. Phase shifting interferometry for large-sized surface measurements by sweeping the repetition rate of femtosecond light pulses. Int. J. Precis. Eng. Manuf. 14, 241–246 (2013). https://doi.org/10.1007/s12541-013-0033-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0033-y