Skip to main content
Springer Nature Link
Log in

Investigations into performance of dry EDM using slotted electrodes

  • Published:
International Journal of Precision Engineering and Manufacturing Aims and scope Submit manuscript

Abstract

Dry EDM is an emerging EDM technology, which uses gas as dielectric fluid. Due to low density of gaseous dielectric, the process experiences i) unconstrained plasma expansion thereby reducing the effective material removal rate (MRR) and ii) inefficient disposal of debris. This work proposes use of electrodes with peripheral slots to provide more space for the flow of dielectric for effective debris disposal and consequently improve MRR. In this regard, a comprehensive experimentation using Taguchi L16 orthogonal array has been planned initially to optimize the number of peripheral slots on the electrodes, and then to understand the effect of the slots on material removal, tool wear, oversize and depth achieved as a function of processing conditions. It is observed that the optimum number of peripheral slots on electrode for effective debris evacuation is four for the electrode configuration used in this work. The statistical analysis shows that in dry EDM, discharge current (I), gap voltage (V), rotational speed (N) and pulse off-time (Toff) control MRR. Also, use of slotted electrodes significantly reduces the electrode wear rate, and attachment of debris particles on the electrodes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Explore related subjects

Discover the latest articles and news from researchers in related subjects, suggested using machine learning.

References

  1. Kunieda, M., Yoshida, M. and Taniguchi, N., “Electrical discharge machining in gas,” CIRP Annals — Manufacturing Technology, Vol. 46, No. 1, pp. 143–146, 1997.

    Article  Google Scholar 

  2. Zhang, Q. H., Zhang, J. H., Deng, J. X., Qin, Y. and Niu, Z. W., “Ultrasonic vibration electrical discharge machining in gas,” Journal of Materials Processing Technology, Vol. 129, No. 1–3, pp. 135–138, 2002.

    Article  Google Scholar 

  3. Tao, J., Shih, A. J. and Ni, J., “Experimental study of the dry and near dry electrical discharge milling processes,” Journal of Manufacturing Science and Engineering, Vol. 130, No. 1, pp. 1–8, 2008.

    Article  Google Scholar 

  4. Kao, C. C., Tao, J. and Shih, A. J., “Near dry electrical discharge machining,” International Journal of Machine Tools and Manufacture, Vol. 47, No. 15, pp. 2273–2281, 2007.

    Article  Google Scholar 

  5. Kunieda, M., Miyoshi, Y., Takaya, T., Nakajima, N., ZhanBo, Y. and Yoshida, M., “High speed 3D milling by dry EDM,” CIRP Annals — Manufacturing Technology, Vol. 52, No. 1, pp. 147–150, 2003.

    Article  Google Scholar 

  6. Yu, Z., Jun, T. and Kunieda, M., “Dry electrical discharge machining of cemented carbide,” Journal of Materials Processing Technology, Vol. 149, No. 1–3, pp. 353–357, 2004.

    Article  Google Scholar 

  7. Tao, J., Shih, A. J. and Ni, J., “Near-dry EDM milling of mirror-like surface finish,” International Journal of Electrical Machining, Vol. 13, No. 1, pp. 29–33, 2008.

    Google Scholar 

  8. Saha, S. K. and Choudhury, S. K., “Experimental investigation and empirical modeling of the dry electric discharge machining process,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 3–4, pp. 297–308, 2009.

    Article  Google Scholar 

  9. Phadke, M. S., “Quality Engineering using Robust Design,” Prentice Hall Publication, New Jersey, pp. 149, 280–285,1989.

  10. Govindan, P. and Joshi, S. S., “Experimental characterization of material removal in dry electrical discharge drilling,” International Journal of Machine Tools and Manufacture, Vol. 50, No. 5, pp. 431–443, 2010.

    Article  Google Scholar 

  11. Dhar, S., purohit, R., Saini, N., Sharma, A. and Kumar, G. H., “Mathematical modeling of electric discharge machining of cast Al-4Cu-6Si alloy-10 wt.% SiCp composites,” Journal of Materials Processing Technology, Vol. 194, No. 1–3, pp. 24–29, 2007.

    Article  Google Scholar 

  12. Yoo, B. H., Min, B. K. and Lee, S. J., “Analysis of machining characteristics of EDM as functions of the mobilities of electrons and ions,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 4, pp. 629–632, 2010.

    Article  Google Scholar 

  13. Chung, D. K., Shin, H. S., Park, M. S. and Chu, C. M., “Machining characteristics of micro-EDM in water using high frequency bipolar pulse,” Vol. 12, No. 2, pp. 195–201, 2011.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai, India, 400076

    Govindan Puthumana & Suhas S. Joshi

Authors
  1. Govindan Puthumana
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Suhas S. Joshi
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Suhas S. Joshi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Puthumana, G., Joshi, S.S. Investigations into performance of dry EDM using slotted electrodes. Int. J. Precis. Eng. Manuf. 12, 957–963 (2011). https://doi.org/10.1007/s12541-011-0128-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12541-011-0128-2

Keywords