ABSTRACT
Nowadays, due to the environmental regulations, the automotive market is demanding more complex components and the utilization of new materials. In this context, and due to its wide range of advantages, rotary forging technology is a very promising metal forming alternative to the conventional forming techniques. In this paper, an analysis of the material, the stress and strain has been realized, in order to show a comparison between conventional and rotary forging and to understand the mechanisms of rotary forming.
REFERENCES
GROCHE P., FRITSCHE D., TEKKAYA E.A., ALLWOOD J.M., HIRT G., NEUGEBAUER R. ‘‘Incremental Bulk Metal Forming” 57th CIRP General Assembly, Dresden(Germany), 19/08/2007–25/08/2007.
STANDRING P.M. ‘‘The significance of nutation angle in rotary forging’’ Advance Technology of Plasticity, Vol III. Proceedings of the 6th ICTP, Sept. 19–24, 1999.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Montoya, I., Santos, M.T., Pérez, I. et al. Kinematic and sensitivity analysis of rotary forging process by means of a simulation model. Int J Mater Form 1 (Suppl 1), 383–386 (2008). https://doi.org/10.1007/s12289-008-0075-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-008-0075-3