Skip to main content

Advertisement

Log in

The Relationship Between Holding Time and the Bacterial Load on Surgical Instruments

  • Original Article
  • Published:
Indian Journal of Surgery Aims and scope Submit manuscript

Abstract

The aim of this investigation was to determine the bacterial load on used instruments and to evaluate the relationship between the bacterial load and the holding time prior to cleaning. Thirty six sets were evaluated to establish the average number of bacteria per square centimeter. For the experimental study, three different bacteria were prepared in sheep blood and used to contaminate sterile stainless steel pieces with the surface of 10 cm2. After incubation at room temperature for 2, 4, 6, 8, 12, 24, 36, and 48 h, colonies were counted and compared to time zero. Bacterial counts were between 10 and 250 CFU/cm2, depending on the operation site. Bacterial load was found to have increased after 6 h. An increase of 3log10 CFU/cm2 was measured after 12 h. It is imperative to clean surgical instruments in the first 6 h to ensure effective disinfection and sterility.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1

Similar content being viewed by others

References

  1. Spaulding EH (1963) Principles of microbiology as applied to operating room nursing. AORN 1:49–57

    Article  Google Scholar 

  2. Chu NS, Chan-Myers H, Ghazanfari N, Antonoplos P (1999) Levels of naturally occurring microorganisms on surgical instruments after clinical use and after washing. Am J Infect Control 27:315–319

    Article  CAS  PubMed  Google Scholar 

  3. Chan-Myers H, McAlister D, Antonoplos P (1997) Natural bioburden levels detected on rigid lumened medical devices before and after cleaning. Am J Infect Control 25:471–476

    Article  CAS  PubMed  Google Scholar 

  4. Smith G, Smith A, Ramage G (2009) Assessment of biofouling of dental handpieces after use. Abstract Book of 10th World Congress of Sterilization, Crete, Greece. (Poster no.4): 9

  5. Instrument Preparation Working Group (2005) Proper Maintenance of Instruments. 8th revised ed. Germany: Instrument Preparation Working Group

  6. Huys J (2004) Sterilization of medical supplies by steam. Vol 1-General Theory, 2nd edn. Benedict Press, Germany

    Google Scholar 

  7. Knapp C, Moody JA (1992) Time-kill assay. In: Isenberg HD (ed) Clinical microbiology procedures handbook. Vol 1. American Society for Microbiology, Washington, pp 5.16.14–5.16.20

    Google Scholar 

  8. Hurst V, Sutter VL (1966) Survival of Pseudomonas aeruginosa in the hospital environment. J Infect Dis 116:151–154

    Article  CAS  PubMed  Google Scholar 

  9. Perkins JJ (1969) Growth and death of microorganisms. In: Perkins JJ (ed) Principles and methods of sterilization in health sciences, 2nd edn. Charles C Thomas, Illinois, pp 56–62

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Duygu Percin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Percin, D., Sav, H., Hormet-Oz, H.T. et al. The Relationship Between Holding Time and the Bacterial Load on Surgical Instruments. Indian J Surg 77, 16–18 (2015). https://doi.org/10.1007/s12262-012-0725-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12262-012-0725-z

Keywords

Navigation