Abstract
Occupant protection of vehicle cab is required for all the commercial vehicles. According to ECE R29-03 amendments, the simulation methods of the front pillar impact test and the side 20° pendulum impact of the roof strength test for a light truck with a gross mass not exceeding 7.5t are proposed. In this study, a reliable finite element model of a light truck is built by using its CAD model. The finite element model is verified against cab modal test and frontal impact test. Then two crash tests are simulated to evaluate the survival space by examining the contact between the deformed cab and a prescribed manikin model. In the front pillar impact test, the deformed cab is predicted to contact with the manikin. In the roof strength test, the minimum distance between the deformed cab and the manikin is predicted to be 75.3 mm, which does not satisfy requirements either. To enhance the crashworthiness of the truck, some structural improvements are designed such as filling structural foam in the A-pillars and the side panels, adding a roof crossbeam, and reinforcing the rear wall of cab. The simulation results of the improved cab structure show that the cab stiffness is improved, the energy absorption is more homogeneous and there is no penetration into the survival space.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Altair Engineering, Inc. (2011). RADIOSS Theory Manual 11.0 Version. Altair Engineering, Inc.
Bae, G. H. and Huh, H. (2012). Comparison of the optimum designs of center pillar assembly of an auto-body between conventional steel and ahss with a simplified side impact analysis. Int. J. Automotive Technology 13, 2, 205–213.
Cao, L., Bai, Z., Wu, J., Cui, C. and Niu, Z. (2009). Structural improvement for the crash safety of commercial vehicle. SAE Paper No. 2009-01-2917.
De Castro, I., Jokuszies, M., Altamore, P. and Lee, W. (2001). Simulation of occupant response in the ECE R29 safety test. SAE Paper No. 2001-01-3845.
Dwivedi, P., Kulkarni, A., Chalipat, S. and Pardeshi, M. (2011). Protection devices to improve frontal pendulum impact performance of heavy commercial vehicles. SAE Paper No. 2011-26-0099.
ECE R29-03 (2010). Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants of the cab of a commercial vehicle.
GB 11551-2003 (2003). The protection of the occupants in the event of a frontal collision for passenger car.
GB 26512-2011 (2011). The protection of the occupants of the cab of a commercial vehicle.
Gendar, D. (2007). Numerical simulations for testing of commercial vehicle as per ECE-R29 regulations. SAE Paper No. 2007-26-045.
Ha, J., Huh, H., Song, J. H. and Lim, J. H. (2013). Prediction of failure characteristics of spot welds of DP and trip steels with an equivalent strength failure model. Int. J. Automotive Technology 14, 1, 67–78.
Li, S., Guo, K., Zhao, Y. and Guo, Y. (2005). Frontal pendulum impact test and computer simulation of commercial vehicles. China Mechanical Engineering 16, 23, 2153–2156.
Nguyen, N. T., Kim, D. Y., Song, J. H., Kim, K. H., Lee, I. H. and Kim, H. Y. (2012). Numerical prediction of various failure modes in spotwelded metals. Int. J. Automotive Technology 13, 3, 459–467.
Pathare, R. and Mansour, M. (2009). Automotive roof crush structural foam enhancement solution. SAE Paper No. 2009-01-0371.
Patidar, S., Tandon, V., Mahajan, R. and Raju, S. (2005). Practical problems in implementing commercial vehicle cab occupant protection standard ECE R-29. SAE Paper No. 2005-26-041.
Sato, K., Yoshitake, A., Zeng, D. and Liu, S. (2002). Crashworthiness of automotive stamped parts using high strength steel sheets. SAE Paper No. 2002-01-0641.
Sun, D. Z., Andrieux, F., Ockewitz, A., Klamser, H. and Hogenmüller, J. (2005). Modelling of the failure behaviour of windscreens and component tests. LSDYNA Anwenderforum, Bamber B-II-23.
Sun, H. T., Wang, J., Shen, G. Z. and Hu, P. (2013). Application of warm forming aluminum alloy parts for automotive body based on impact. Int. J. Automotive Technology 14, 4, 605–610.
Tonioli, J., Castro, I., Ripoli, R. and Argentino, M. (2000). Computational simulation of the ECE R-29 safety test. SAE Paper No. 2000-01-3524.
Wang, D., Liu, L., Su, Y., Guo, L., Zhang, C., Tang, H. and Li, H. (2010). Research and analysis concerning commercial vehicle cab strength test requirements. Automobile Technology, 10, 50–53.
Wang, D., Liu, L., Su, Y., Guo, L., Zhang, C., Tang, H. and Li, H. (2011). A study on the impact safety of commercial vehicle cab and its improvement. Automotive Engineering 33, 1, 2–5.
Wang, L., Chen, D., Yuan, L., Zhang, Z. and Zhang, T. (2012). Simulation and improvement of safety performances of a certain school bus. J. Nanjing University of Science and Technology (Nature Science) 36, 6, 1031–1035.
Xu, J., Li, Y. B., Chen, X., Ge, D. Y., Liu, B. H., Zhu, M. Y. and Park, T. H. (2011). Automotive windshieldpedestrian head impact: Energy absorption capability of interlayer material. Int. J. Automotive Technology 12, 5, 687–695.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, D.Y., Wang, L.M., Wang, C.Z. et al. Finite element based improvement of a light truck design to optimize crashworthiness. Int.J Automot. Technol. 16, 39–49 (2015). https://doi.org/10.1007/s12239-015-0004-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-015-0004-7