Abstract
This paper studies buckling behavior of non-uniform fiber columns under axially distributed compressive load and presents a new approach for determining buckling load. For free-built-in fibers, a Fredholm equation is derived from solving the governing equation with end constraints. Critical load and critical length can be evaluated by seeking the lowest eigenvalue of the resulting equation. For the cases of the cross-sectional moment of inertia and axially distributed load as power functions with respect to the axial distance from the free end, a necessary condition for buckling is derived, and a polynomial characteristic equation is then obtained and solved. The effect of the weight and axial profile of tapered fibers on the critical length is discussed.
Similar content being viewed by others
References
T. K. Ghosh and N. Zhou, Ind. J. Fabric Text. Res., 28, 471 (2003).
J. W. Park, Text. Res. J., 76, 478 (2006).
J. Amirbayat and J. W. S. Hearle, J. Text. Ins., 80, 51 (1989).
P. Grosberg and N. M. Swani, Text. Res. J., 36, 332 (1966).
T. G. Clap and H. Peng, Text. Res. J., 60, 228 (1990).
T. G. Clap and H. Peng, Text. Res. J., 60, 285 (1990).
A. L. Shiekh and S. P. Hersh, “Studies in Modern Fabrics”, pp.159–180, The Textile Institute, Manchester, 1970.
S. P. Timoshenko and J. M. Gere, “Theory of Elastic Stability”, pp.125–132, McGraw-Hill, New York, 1961.
M. Eisenberger, Int. J. Solids Struct., 27, 135 (1991).
K. Lee, Fiber. Polym., 9, 200 (2008).
B. K. Lee, A. J. Carr, T. E. Lee, and I. J. Kim, J. Sound Vib., 294, 381 (2006).
F. Bowman, “Introduction to Bessel Functions”, pp.115–127, Dover Publications Inc., New York, 1958.
Y. Huang and X.-F. Li, J. Sound Vib., 329, 2291 (2010).
M. Abramowitz and I. A. Stegun, “Handbook of Mathematical Functions”, p.258, Dover Publications, New York, 1972.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, X.F., Xi, L.Y. & Huang, Y. Buckling load of tapered fibers subjected to axially distributed load. Fibers Polym 11, 1193–1197 (2010). https://doi.org/10.1007/s12221-010-1193-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-010-1193-3