Abstract
Investigating the shear strength characteristics of sliding zone soil is crucial for evaluating slope safety and stability. This paper discusses the shear strength characteristics of Lishi loess and N2 laterite in the sliding zone under different influencing factors based on in-suit multiple shear tests, and the shear strength characteristics of Lishi loess were contrasted and analyzed based on field and laboratory tests. The results indicated a favorable correlation between the shear strength of soil samples and normal stress. The shear strength attenuation of clay-rich N2 laterite was much larger than that of sand-rich Lishi loess with the increase of the shear stage. Importantly, the mutation points of the shear rate corresponding to the peak stress of soil samples were obtained, which can be used as a symbol to judge the transfixion of the shear plane. Moreover, the stress-strain characteristics of Lishi loess under the same normal load were diverse as a result of the different experimental methods, and the residual strength characteristics for the two tests also varied substantially. Notably, the Lishi loess in the field test has a more stable residual strength than the laboratory direct shear test conducted. The findings can aid in the comprehension of the mechanical behavior of loess and laterite on the Loess Plateau.
Similar content being viewed by others
References
Alcántara-Ayala I (2021) The use of UAVs for landslide disaster risk research and disaster risk management: A literature review. Journal of Mountain Science 18(2):482–498, DOI: https://doi.org/10.1007/s11629-020-6467-7
Bishop AW, Green GE, Garga VK, Andresen A, Brown JD (1971) A new ring shear apparatus and its application to the measurement of residual strength. Géotechnique 21(4):273–328, DOI: https://doi.org/10.1680/geot.1971.21.4.273
Bromhead EN, Dixon N (1986) The field residual strength of London Clay and its correlation with loboratory measurements, especially ring shear tests. Géotechnique 36(3):449–452, DOI: https://doi.org/10.1680/geot.1986.36.3.449
Chen XP, Liu D (2014) Residual strength of slip zone soils. Landslides 11(2):305–314, DOI: https://doi.org/10.1007/s10346-013-0451-z
Chen H, Ma W, Yuan X, Niu C, Shi B, Tian G (2022) Influence of stress conditions on shear behavior of slip zone soil in ring shear test: An experimental study and numerical simulation. Natural Hazards 11(2):1179–1197, DOI: https://doi.org/10.1007/s11069-021-05090-0
Cheng B, Wang H, Zong Q, Xu Y, Wang M, Zheng Q (2021) Study of the double wedge cut technique in medium-depth hole blasting of rock roadways. Arabian Journal for Science and Engineering 46(5): 4895–4909, DOI: https://doi.org/10.1007/s13369-020-05279-8
Duong NT, Suzuki M, Van HN (2018) Rate and acceleration effects on residual strength of kaolin and kaolin–bentonite mixtures in ring shearing. Soils and Foundations 58(5):1153–1172, DOI: https://doi.org/10.1016/j.sandf.2018.05.011
Duong NT, Van HN (2022) Residual strength of weakly cemented kaolin clay in multi-stage ring shear test. Arabian Journal for Science and Engineering 47(4):4437–4451, DOI: https://doi.org/10.1007/s13369-021-06132-2
Eid HT, Amarasinghe RS, Rabie KH, Wijewickreme D (2015) Residual shear strength of fine-grained soils and soil–solid interfaces at low effective normal stresses. Canadian Geotechnical Journal 52(2):198–210, DOI: https://doi.org/10.1139/cgj-2014-0019
Fekadu S (2021) Shear strength and consolidation characteristics of lateritic soils: A case of asela town, oromia regional state, Ethiopia. International Journal of Environmental Monitoring and Analysis 9(1):21, DOI: https://doi.org/10.11648/j.ijema.20210901.13
GB 50021–2001 (2001) Code for investigation of geotechnical engineering. China Architecture Publishing & Media Co., Ltd, Beijing, China (in Chinese)
Gibo S, Egashira K, Ohtsubo M (1987) Residual strength of smectite-dominated soils from the Kamenose landslide in Japan. Canadian Geotechnical Journal 24(3):456–462, DOI: https://doi.org/10.1139/t87-057
Gibo S, Egashira K, Ohtsubo M, Nakamura S (2002) Strength recovery from residual state in reactivated landslides. Géotechnique 52(9): 683–686, DOI: https://doi.org/10.1680/geot.2002.52.9.683
Gong J (2019) Exploring the effects of particle shape and content of fines on the shear behavior of sand-fines mixtures via the DEM. Computers and Geotechnics 106:161–176, DOI: https://doi.org/10.1016/j.compgeo.2018.10.021
Gu T, Wang J, Wang C, Bi Y, Guo Q, Liu Y (2019) Experimental study of the shear strength of soil from the Heifangtai Platform of the Loess Plateau of China. Journal of Soils and Sediments 19(10):3463–3475, DOI: https://doi.org/10.1007/s11368-019-02303-9
Guo Y, Ni W, Liu H (2021) Effects of dry density and water content on compressibility and shear strength of loess. Geomechanics and Engineering 24(5):419–430, DOI: https://doi.org/10.12989/GAE.2021.24.5.419
Habibbeygi F, Nikraz H (2018) Effect of shear rate on the residual shear strength of pre-sheared clays (S. Irene Torri, Ed.). Cogent Geoscience 4(1):1453989, DOI: https://doi.org/10.1080/23312041.2018.1453989
Han M, Chen X, Li Z, Jia J (2023) Improved inverse analysis methods and modified apparent earth pressure for braced excavations in soft clay. Computers and Geotechnics 159:105456, DOI: https://doi.org/10.1016/j.compgeo.2023.105456
Han M, Li Z, Mei G, Bao X, Jia J, Liu L, Li Y (2022) Characteristics of subway excavation in soft soil and protective effects of partition wall on the historical building and pile foundation building. Bulletin of Engineering Geology and the Environment 81(8):307, DOI: https://doi.org/10.1007/s10064-022-02802-z
HG/T 20693–2006 (2006) Specification for field direct shear test of rock and soil mass. China Planning Press, Beijing, China (in Chinese)
Hong Y, Wang JG (2012) Strain softening behaviors of clay under fast ring shear conditions. Advanced Materials Research 446–449:1880–1883, DOI: https://doi.org/10.4028/www.scientific.net/AMR.446-449.1880
JTG E40–2007 (2007) Test methods of soils for highway engineering. China Communications Press, Beijing, China (in Chinese)
Kimura S, Nakamura S, Vithana SB (2015) Influence of effective normal stress in the measurement of fully softened strength in different origin landslide soils. Soil and Tillage Research 145:47–54, DOI: https://doi.org/10.1016/j.still.2014.07.018
Li Y (2018) A review of shear and tensile strengths of the Malan Loess in China. Engineering Geology 236:4–10, DOI: https://doi.org/10.1016/j.enggeo.2017.02.023
Li Z, Guan C, Han M, Jia J, Liu L, Li W (2022a) Estimation of settlement in loess-filled subgrade with consideration of lateral deformation. Arabian Journal for Science and Engineering 47(4):4713–4729, DOI: https://doi.org/10.1007/s13369-021-06247-6
Li YR, Wen BP, Aydin A, Ju NP (2013) Ring shear tests on slip zone soils of three giant landslides in the Three Gorges Project area. Engineering Geology 154:106–115, DOI: https://doi.org/10.1016/j.enggeo.2012.12.015
Li Z, Zhu Z, Liu L, Sun L (2022b) Distributions of earth pressure and soil resistance on full buried single-row anti-sliding piles in loess slopes in northern Shaanxi based on in-situ model testing. Bulletin of Engineering Geology and the Environment 81(3):127, DOI: https://doi.org/10.1007/s10064-022-02583-5
Lian B, Peng J, Wang X, Huang Q (2018) Influence of shearing rate on the residual strength characteristic ofthree landslides soils in loess area: Landslides and Debris Flows Hazards. Nat. Hazards Earth Syst. Sci. Discuss, DOI: https://doi.org/10.5194/nhess-2018-270
Lian B, Peng J, Wang X, Huang Q (2020a) Moisture content effect on the ring shear characteristics of slip zone loess at high shearing rates. Bulletin of Engineering Geology and the Environment 79(2):999–1008, DOI: https://doi.org/10.1007/s10064-019-01597-w
Lian B, Wang X, Liu K, Hu S, Feng X (2021) A mechanical insight into the triggering mechanism of frequently occurred landslides along the contact between loess and red clay. Scientific Reports 11:17556, DOI: https://doi.org/10.1038/s41598-021-96384-7
Lian B, Wang X, Peng J, Huang Q (2020b) Shear rate effect on the residual strength characteristics of saturated loess in naturally drained ring shear tests. Natural Hazards and Earth System Sciences 20(10):2843–2856, DOI: https://doi.org/10.5194/nhess-20-2843-2020
Lin X, Zhang L, Yang Z, Li P, Li T (2021) Inversion analysis of the shear strength parameters for a high loess slope in the limit state. Journal of Mountain Science 18(1):252–264, DOI: https://doi.org/10.1007/s11629-020-6142-z
Lucieer A, Jong SM de, Turner D (2014) Mapping landslide displacements using structure from motion (SfM) and image correlation of multitemporal UAV photography: Progress in Physical Geography. Earth and Environment 38(1):97–116, DOI: https://doi.org/10.1177/0309133313515293
Lupini JF, Skinner AE, Vaughan PR (1981) The drained residual strength of cohesive soils. Géotechnique 31(2):181–213, DOI: https://doi.org/10.1680/geot.1981.31.2.181
Ma C (2019) Investigation on shear behavior of soft interlayers by ring shear tests. Engineering Geology 9, DOI: https://doi.org/10.1016/j.enggeo.2019.04.002
Meng F, Wong LNY, Zhou H, Yu J, Cheng G (2019) Shear rate effects on the post-peak shear behaviour and acoustic emission characteristics of artificially split Granite Joints. Rock Mechanics and Rock Engineering 52(7):2155–2174, DOI: https://doi.org/10.1007/s00603-018-1722-8
Miao H, Wang G (2021) Effects of clay content on the shear behaviors of sliding zone soil originating from muddy interlayers in the Three Gorges Reservoir, China. Engineering Geology 294:106380, DOI: https://doi.org/10.1016/j.enggeo.2021.106380
Pradhan S, Kumar S, Barai SV (2017) Recycled aggregate concrete: Particle packing method (PPM) of mix design approach. Construction and Building Materials 152:269–284, DOI: https://doi.org/10.1016/j.conbuildmat.2017.06.171
Raj BD (2022) Shear rate effect on residual strength of typical clay soils. Innovative Infrastructure Solutions 7(1):36, DOI: https://doi.org/10.1007/s41062-021-00629-3
Rigo ML, Pinheiro RJB, Bressani LA, Bica AVD, Silveira RM da (2006) The residual shear strength of tropical soils. Canadian Geotechnical Journal 43(4):431–447, DOI: https://doi.org/10.1139/t06-015
Scaringi G, Di MC (2016) Influence of displacement rate on residual shear strength of clays. Procedia Earth and Planetary Science 16:137–145, DOI: https://doi.org/10.1016/j.proeps.2016.10.015
Shi W, Zhang M, Ke H, Fang X, Zhan Z, Chen S (2021) Landslide recognition by deep convolutional neural network and change detection. IEEE Transactions on Geoscience and Remote Sensing 59(6):4654–4672, DOI: https://doi.org/10.1109/TGRS.2020.3015826
Sim KB, Lee ML, Wong SY (2022) A review of landslide acceptable risk and tolerable risk. Geoenvironmental Disasters 9(1):3, DOI: https://doi.org/10.1186/s40677-022-00205-6
Suzuki M, Tsuzuki S, Yamamoto T (2007) Residual strength characteristics of naturally and artificially cemented clays in reversal direct box shear test. Soils and Foundations 47(6):1029–1044, DOI: https://doi.org/10.3208/sandf.47.1029
Suzuki M, Van HN, Yamamoto T (2017) Ring shear characteristics of discontinuous plane. Soils and Foundations 57(1):1–22, DOI: https://doi.org/10.1016/j.sandf.2017.01.001
Tan Q, Tang H, Fan L, Xiong C, Fan Z, Zhao M, Li C, Wang D, Zou Z (2018) In situ triaxial creep test for investigating deformational properties of gravelly sliding zone soil: Example of the Huangtupo 1# landslide, China. Landslides 15(12):2499–2508, DOI: https://doi.org/10.1007/s10346-018-1062-5
Tan X, Ren Y, Li T, Zhou S, Zhang J, Zhou S (2021) In-situ direct shear test and numerical simulation of slate structural planes with thick muddy interlayer along bedding slope. International Journal of Rock Mechanics and Mining Sciences 143:104791, DOI: https://doi.org/10.1016/j.ijrmms.2021.104791
Tiwari B, Marui H (2004) Objective oriented multistage ring shear test for shear strength of landslide soil. Journal of Geotechnical and Geoenvironmental Engineering 130(2):217–222, DOI: https://doi.org/10.1061/(ASCE)1090-0241(2004)130:2(217)
Wang L, Han J, Liu S, Yin X (2020) Variation in shearing rate effect on residual strength of slip zone soils due to test conditions. Geotechnical and Geological Engineering 38(3):2773–2785, DOI: https://doi.org/10.1007/s10706-020-01186-9
Wang Q, Li W, Guo Y, Yang Y Fan K (2019) Geological and geotechnical characteristics of N laterite in northwestern China. Quaternary International 519:263–273, DOI: https://doi.org/10.1016/j.quaint.2019.02.009
Wang S, Wu W, Xiang W, Liu Q (2015) “Shear behaviors of saturated loess in naturally drained ring-shear tests.” Recent Advances in Modeling Landslides and Debris Flows, Springer Series in Geomechanics and Geoengineering, Springer International Publishing, Berlin, GER, 19–27
Wen BP, Aydin A, Duzgoren-Aydin NS, Li YR Chen HY, Xiao SD (2007) Residual strength of slip zones of large landslides in the Three Gorges area, China. Engineering Geology 93(3–4):82–98, DOI: https://doi.org/10.1016/j.enggeo.2007.05.006
Xu G, Chen Z, Xu K, Lei Y, Chen M, Lei M (2021) Back-analysis scheme of shear strength parameters of soil slope based on strength asynchronous reduction mode. Arabian Journal for Science and Engineering 47:4323–4334, DOI: https://doi.org/10.1007/s13369-021-06037-0
Xu C, Wang X, Lu X, Dai F, Jiao S (2018) Experimental study of residual strength and the index of shear strength characteristics of clay soil. Engineering Geology 233:183–190, DOI: https://doi.org/10.1016/j.enggeo.2017.12.004
Yoon HK, Lee CK, Hyun K, Lee JS (2011) Evaluation of preconsolidation stress by shear wave velocity. Smart Structures and Systems 7(4):275–287, DOI: https://doi.org/10.12989/SSS.2011.7.4.275
Yuan W, Fan W, Jiang C, Peng X (2019) Experimental study on the shear behavior of loess and paleosol based on ring shear tests. Engineering Geology 250:11–20, DOI: https://doi.org/10.1016/j.enggeo.2019.01.007
Zhu Y, Miao S, Li H, Han Y, Lan H (2022a) An empirical shear model of interface between the loess and hipparion red clay in a loess landslide. Frontiers in Earth Science 9:806832, DOI: https://doi.org/10.3389/feart.2021.806832
Zhu R, Xie W, Liu Q, Yang H, Wang Q (2022b) Shear behavior of sliding zone soil of loess landslides via ring shear tests in the South Jingyang Plateau. Bulletin of Engineering Geology and the Environment 81(6):244, DOI: https://doi.org/10.1007/s10064-022-02719-7
Zhu Y, Qiu H, Yang D, Liu Z, Ma S, Pei Y, He J, Du C, Sun H (2021) Pre-and post-failure spatiotemporal evolution of loess landslides: A case study of the Jiangou landslide in Ledu, China. Landslides 18(10):3475–3484, DOI: https://doi.org/10.1007/s10346-021-01714-5
Zhuang J, Peng J, Zhu Y (2021) Study of the effects of clay content on loess slope failure mode and loess strength. Bulletin of Engineering Geology and the Environment 80(3):1999–2009, DOI: https://doi.org/10.1007/s10064-020-02055-8
Zou Z, Yan J, Tang H, Wang S, Xiong C, Hu X (2020a) A shear constitutive model for describing the full process of the deformation and failure of slip zone soil. Engineering Geology 276:105766, DOI: https://doi.org/10.1016/j.enggeo.2020.105766
Zuo S, Zhao L, Deng D, Han Z, Zhao B, Zhao Z (2022) Back analysis of shear strength parameters for progressive landslides: Case study of the Caifengyan landslide, China. Bulletin of Engineering Geology and the Environment 81(1):19, DOI: https://doi.org/10.1007/s10064-021-02507-9
Zou Z, Zhang Q, Xiong C, Tang H, Fan L, Xie F, Yan J, Luo Y (2020b) In situ shear test for revealing the mechanical properties of the gravelly slip zone soil. Sensors 20(22):6531, DOI: https://doi.org/10.3390/s20226531
Acknowledgments
The authors are grateful for the financial and technical support provided by the Shaanxi Academy of Building Research Co., LTD (Grant No. 2021SF-459).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Z., Li, J., Han, M. et al. Investigating the Shear Strength Characteristics of Slip Zone Soil Based on In-situ Multiple Shear Tests. KSCE J Civ Eng 27, 3793–3807 (2023). https://doi.org/10.1007/s12205-023-2095-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-023-2095-4