Skip to main content
SpringerLink
Log in

Accurate 3D surface measurement of mountain slopes through a fully automated image-based technique

  • Research Article
  • Published:
Earth Science Informatics Aims and scope Submit manuscript

Abstract

In this paper an automated procedure for surface reconstruction that can be used for surveying and monitoring rock and ground slopes is presented. This method has been developed for geological and engineering applications, where accuracy and completeness are factors of primary importance for the final 3D model, which must provide a detailed metric survey and not only a visual reconstruction of the scene. The proposed procedure integrates two image matching techniques. The first one is used to automatically extract a set of tie points that are needed for computing the exterior orientation parameters of all images through a photogrammetric bundle adjustment. Such tie oints are also exploited to obtain a preliminary seed model that is then enriched based on Multi-photo Least Squares Matching. During this second stage, the surface model is improved in terms of point density and accuracy. Different strategies were implemented to successfully combine both techniques, along with some new improvements. The presented procedure has been tested in two different applications: geometric modelling of rock cliffs and evaluation of weathering of a ground slope. In both cases the obtained results presented accuracy sufficient for geological investigation. Moreover, outcomes were comparable to the ones from laser scanning surveying and other photogrammetric implementations.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  • Abellán A, Vilaplana JM, Martínez J (2006) Application of a long-range terrestrial laser scanner to a detailed rockfall study at vall de núria (Eastern Pyrenees, Spain). Eng Geol 88(3–4):136–148

    Article  Google Scholar 

  • Abellán A, Jaboyedoff M, Oppikofer T, Vilaplana JM (2009) Detection of millimetric deformation using a terrestrial laser scanner: experiment and application to a rockfall event. Nat Hazards Earth Syst Sci 9(2):365–372

    Article  Google Scholar 

  • Abidin H, Andreas H, Gamal M, Sadarviana V, Darmawan D, Surono Hendrasto M, Suganda O (2007) Studying landslide displacements in the ciloto area (Indonesia) using GPS surveys. J Spat Sci 52(1):55–63

    Article  Google Scholar 

  • Agarwal S, Snavely N, Simon I, Seitz SM, Szeliski R (2009) Building rome in a day. Commun ACM 54(10):105–112

    Article  Google Scholar 

  • Agliardi F, Crosta G (2003) High resolution three-dimensional numerical modelling of rockfalls. Int J Rock Mech Min Sci 40(4):455–71

    Article  Google Scholar 

  • Alba MI, Barazzetti L, Roncoroni F, Scaioni M (2011) Filtering vegetation from terrestrial point clouds with low-cost near infrared cameras. Ital J Remote Sens 43:55–75

    Article  Google Scholar 

  • Baltsavias EP (1991) Multiphoto geometrically constrained matching. Ph.D. thesis No. 9561, Mitteilungen Nr. 49, Institute of Geodesy and Photogrammetry, ETH Zurich, Switzerland. 221 pages.

  • Barazzetti L, Scaioni M (2009) Crack measurement: development, testing and applications of an automatic image-based algorithm. ISPRS J Photogramm Remote Sens 64(3):285–296

    Article  Google Scholar 

  • Barazzetti L, Remondino F, Scaioni M (2010) Orientation and 3D modelling from markerless terrestrial images: combining accuracy with automation. Photogramm Rec 25(132):356–381

    Article  Google Scholar 

  • Barazzetti L, Forlani G, Remondino F, Roncella R and Scaioni M (2011) Experiences and achievements in automated image sequence orientation for close-range photogrammetric projects. In: Proc. Int. Conf. “Videometrics, Range Imaging, and Applications XI”, 23–26 May, Munich (Germany), Proc. of SPIE, Vol. 8085, paper No. 80850F, 13 pages.

  • Barla G, Antolini F, Barla M, Mensi E, Piovano G (2010) Monitoring of the Beauregard landslide (aosta valley, Italy) using advanced and conventional techniques. Eng Geol 116(3–4):218–235

    Article  Google Scholar 

  • Besl PJ, McKay ND (1992) A method for registration of 3-D shapes. IEEE Trans Pattern Anal Mach Intell 14(2):239–256

    Article  Google Scholar 

  • Duncan CW, Norman IN (1996) Stabilization of rock slopes. In: Turner AK, Schuster RL (eds) Landslides investigations and mitigation, special report 247. Transportation Research Board, National Research Counci, Washington, pp 474–506

    Google Scholar 

  • Eisenbeiss H, Sauerbier M (2011) Investigation of UAV systems and flight modes for photogrammetric applications. Photogramm Rec 26(136):400–421

    Article  Google Scholar 

  • Feng Q, Sjogren P, Stephansson O, Jing L (2001) Measuring fracture orientation at exposed rock faces by using a non-reflector total station. Eng Geol 59(1–2):133–146

    Article  Google Scholar 

  • Ferrero AM, Forlani G, Roncella R, Voyat HI (2009) Advanced geostructural survey methods applied to rock mass characterization. Rock Mech Rock Eng 42(4):631–665

    Article  Google Scholar 

  • Förstner W (1986) A feature based correspondence algorithm for image matching. Int Arch Photogramm Remote Sens 26(3):150–166

    Google Scholar 

  • Förstner W, Gülch E (1987) A fast operator for detection and precise location of distinct points, corners and centres of circular features. In ISPRS Intercommission Workshop, Interlaken, pp 281–305

    Google Scholar 

  • Fraser CS (2013) Automatic camera calibration in close range photogrammetry. Photogramm Eng Remote Sens 79(4):381–388

    Article  Google Scholar 

  • Fraser CS, Cronk S (2009) A hybrid measurement approach for close-range photogrammetry. ISPRS J Photogramm Remote Sens 64(3):328–333

    Article  Google Scholar 

  • Furukawa Y, Ponce J (2007) Accurate, dense, and robust multi-view stereopsis. IEEE Trans Pattern Analysis Mach Intell 32(8):1362–1376

    Article  Google Scholar 

  • Gao J, Liu C, Wang J, Li Z, Meng X (2011) A new method for mining deformation monitoring with GPS-RTK. Trans Nonferrous Metals Soc China 21:659–664

    Article  Google Scholar 

  • García-Sellés D, Falivene O, Arbués P, Gratacos O, Tavani S, Muñoz J (2011) Supervised identification and reconstruction of near-planar geological surfaces from terrestrial laser scanning. Comput Geosci 37(10):1584–1594

    Article  Google Scholar 

  • Gigli G, Casagli N (2011) Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds. Int J Rock Mech Min Sci 48(2):187–198

    Article  Google Scholar 

  • Grün A (1985) Adaptive least square correlation–a powerful image matching technique. Afr J Photogrammetry Remote Sens Cartog 14(3):175–187

    Google Scholar 

  • Grün A, Baltsavias EP (1988) Geometrically constrained multiphoto matching. Photogramm Eng Remote Sens 54(5):633–641

    Google Scholar 

  • Grün A (2012) Development and status of image matching in photogrammetry. Photogramm Rec 27:36–57

    Article  Google Scholar 

  • Heritage GL, Large ARG (2009) Laser scanning for the environmental sciences. Wiley, UK

    Book  Google Scholar 

  • Hirschmuller H (2008) Stereo processing by semiglobal matching and mutual information. IEEE Trans Pattern Analysis Mach Intell 30(2):328–341

    Article  Google Scholar 

  • Jaboyedoff M, Oppikofer T, Abellán A, Derron MH, Loye A, Metzger R, Pedrazzini A (2012) Use of LIDAR in landslide investigations: a review. Nat Hazards 61:5–28

    Article  Google Scholar 

  • Joyce KE, Belliss SE, Samsonov SV, McNeill SJ, Glassey PJ (2009) A review of the status of satellite remote sensing and image processing techniques for mapping natural hazards and disasters. Prog Phys Geogr 33(2):183–207

    Article  Google Scholar 

  • Kasperski J, Delacourt C, Allemand P, Potherat P, Jaud M, Varrel E (2010) Application of a terrestrial laser scanner (TLS) to the study of the Séchilienne Landslide (Isère, France). Remote Sens 2(12):2785–2802

    Google Scholar 

  • Kemeny J, Post R (2003) Estimating three-dimensional rock discontinuity orientation from digital images of fracture traces. Compt Rendus Geosci 29(1):65–77

    Google Scholar 

  • Kraus K (2007) Photogrammetry, Geometry from images and laser scans. Walter de Gruyte, Germany, p 459

    Book  Google Scholar 

  • Lemy F, Hadjigeorgiou J (2003) Discontinuity trace map construction using photographs of rock exposures. Int J Rock Mech Min Sci 40(6):903–917

    Article  Google Scholar 

  • Longoni L, Arosio D, Scaioni M, Papini M, Zanzi L, Roncella R, Brambilla D (2012) Surface and subsurface non-invasive investigations to improve the characterization of a fractured rock mass. J Geophys Eng 9:461–472

    Article  Google Scholar 

  • Löwe DG (2004) Distinctive image features from scale-invariant keypoints. Int J Comput Vis 60:91–110

    Article  Google Scholar 

  • Luhmann T (2011) 3D imaging–how to achieve highest accuracy. In Videometrics, Range Imaging, and Applications XI, vol. 8085 of Proceedings of SPIE, pp, 1–11, 808502.

  • Martha TR, Kerle N, Jetten V, Van Westen CJ, Kumar KV (2010) Spatial and morphometric properties of landslides for semi-automatic detection using object-oriented methods. Geomorphology 116(1–2):24–36

    Article  Google Scholar 

  • Mora P, Baldi P, Casula G, Fabris M, Ghirotti M, Mazzini E, Pesci A (2003) Global positioning systems and digital photogrammetry for the monitoring of mass movements: application to the Ca' di Malta landslide (Northern Apennines, Italy). Eng Geol 68(1–2):103–121

    Article  Google Scholar 

  • Nex F, Remondino F (2014) UAV for 3D mapping applications: a review. Appl Geomatics 6(1):1–15

    Article  Google Scholar 

  • Nguyen HT, Fernandez-Steeger TM, Wiatr T, Rodrigues D, Azzam R (2011) Use of terrestrial laser scanning for engineering geological applications on volcanic rock slopes–an example from Madeira island (Portugal). Nat Hazards Earth Syst Sci 11(3):807–817

    Article  Google Scholar 

  • Oppikofer T, Jaboyedoff M, Blikra L, Derron MH, Metzger R (2009) Characterization and monitoring of the aknes rockslide using terrestral laser scanning. Nat Hazards Earth Syst Sci 9(3):1003–1019

    Article  Google Scholar 

  • Pierrot Deseilligny M and Clery I (2011) APERO, an open source bundle adjustment software for automatic calibration and orientation of set of images. Int. Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 38 (5/W 16), pp. 269–277, on CD-ROM. ISPRS International Workshop 3D ARCH 2011, Trento, Italy, 2–4 March 2011.

  • Pirotti F, Guarnieri A, Vettore A (2013a) State of the art of ground and aerial laser scanning technologies for high-resolution topography of the earth surface. Eur Remote Sens 46:66–78

    Article  Google Scholar 

  • Pirotti F, Guarnieri A, Vettore A (2013b) Ground filtering and vegetation mapping using multi-return terrestrial laser scanning. ISPRS J Photogramm Remote Sens 76:56–63

    Article  Google Scholar 

  • Previtali M, Barazzetti L and Scaioni M (2011) Multi-step and multi-photo matching for accurate 3D reconstruction. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, Photogrammetric Image Analysis 38(3/W22):103–108.

    Google Scholar 

  • Prokop A, Panholzer H (2009) Assessing the capability of terrestrial laser scanning for monitoring slow moving landslides. Nat Hazards Earth Syst Sci 9:1921–1928

    Article  Google Scholar 

  • Reid T, Harrison J (2000) A semi-automated methodology for discontinuity trace detection in digital images of rock mass exposures. Int J Rock Mech Min Sci 37(7):1073–1089

    Article  Google Scholar 

  • Rosten E, Drummond T (2006) Machine learning for high-speed corner detection, Proceedings of the European conference on computer vision. Springer Berlin Heidelberg, Graz, pp 430–443

    Google Scholar 

  • Salvini R, Francioni M, Riccucci S, Fantozzi P, Bonciani F, Mancini S (2011) Stability analysis of “grotta Delle felci” cliff (Capri island, Italy): structural, engineering–geological, photogrammetric surveys and laser scanning. Bull Eng Geol Environ 70(4):549–557

    Article  Google Scholar 

  • Scaioni M, Alba M, Giussani A, Roncoroni F (2010) Monitoring of a SFRC retaining structure during placement. Eur J Environ Civ Eng 14(4):467–493. doi:10.3166/EJECE.14.467-493

    Article  Google Scholar 

  • Scaioni M, Roncella R, Alba MI (2013) Change detection and deformation analysis in point clouds: application to rock face monitoring. Photogramm Eng Remote Sens 79(5):441–456

    Article  Google Scholar 

  • Schofield W and Breach M (2007) Engineering Surveying–6th Edition. Butterworth-Heinemann.

  • Shan J, Toth CK (2009) Topographic laser scanning and ranging. Principles and processing, Taylor and Francis group. Boca Raton, FL-USA

    Google Scholar 

  • Slob S, Van Knapen B, Hack R, Turner K, Kemeny J (2005) Method for automated discontinuity analysis of rock slopes with three-dimensional laser scanning. Transp Res Rec 1913:187–194

    Article  Google Scholar 

  • Travelletti J, Oppikofer T, Delacourt C, Malet JP, Jaboyedoff M (2008) Monitoring landslide displacements during a controlled rain experiment using a long–range terrestrial laser scanning (TLS). Int Arch Photogramm Remote Sens Spat Inf Sci 37(B5):485–490

    Google Scholar 

  • Vosselman G, Maas HG (2010) Airborne and terrestrial laser scanning. Taylor and Francis Group, Boca Raton

    Google Scholar 

  • Yang IT, Park JK, Kim DM (2007) Monitoring the symptoms of landslide using the non-prism total station. KSCE J Civ Eng 11(6):293–301

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Politecnico di Milano, Department of Architecture, Built Environment and Construction Engineering, Via Ponzio 31, 20133, Milano, Italy

    Mattia Previtali & Luigi Barazzetti

  2. Tongji University, College of Surveying and Geo-Informatics, Center for Spatial Information Science and Sustainable Development Applications, 1239 Siping Road, 200092, Shanghai, Peoples Republic of China

    Marco Scaioni

Authors
  1. Mattia Previtali
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Luigi Barazzetti
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Marco Scaioni
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mattia Previtali.

Additional information

Published in the Special Issue "Application of Surveying in Land Management" with Guest Editors Dr. Marco Scaioni and Dr. Maurício Roberto Veronez

Rights and permissions

Reprints and permissions

About this article

Cite this article

Previtali, M., Barazzetti, L. & Scaioni, M. Accurate 3D surface measurement of mountain slopes through a fully automated image-based technique. Earth Sci Inform 7, 109–122 (2014). https://doi.org/10.1007/s12145-014-0158-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12145-014-0158-2

Keywords

Search

Navigation