Abstract
Organic/inorganic multilayer structures were fabricated for extreme flexibility as well as enhanced moisturebarrier property. The organic and inorganic layers for the structures were formed by plasma polymerization and atomic layer deposition, respectively. The layers were grown alternately to form the organic/inorganic multilayer structures on a plastic substrate. To accomplish extreme flexibility of the barriers, ultra-thin aluminum oxide layers were grown by the atomic layer deposition and sandwiched by a flexible plasma-polymer layer. The moisture-barrier films were then confirmed to retain the initial barrier property even after 10,000 times of bending at a radius as small as 3mm when the barrier structure was located at a neutral plane.
Similar content being viewed by others
References
P. F. Carcia, R. S. McLean and M. H. Reilly, Appl. Phys. Lett., 97, 221901 (2010).
J. Meyer, H. Schmidt, W. Kowalsky, T. Riedl and A. Kahn, Appl. Phys. Lett., 96, 243308 (2010).
T. Riedl, T. Winkler, H. Schmidt, J. Meyer, D. Schneidenbach, H.-H. Johannes, W. Kowalsky, T. Weimann and P. Hinze, IEEE Int. Reliab. Phys. Symp., Anaheim (USA), 327 (2010).
M. D. Groner, S. M. George, R. S. McLean and P. F. Carcia, Appl. Phys. Lett., 88, 051907 (2006).
A. A. Dameron, S. D. Davidson, B. B. Burton, P. F. Carcia, R. S. McLean and S. M. George, J. Phys. Chem. C, 112, 4573 (2008).
P. F. Carcia, R. S. McLean, M. H. Reilly, M. D. Groner and S. M. George, Appl. Phys. Lett., 89, 031915 (2006).
S.-H. Jen, J. A. Bertrand and S. M. George, J. Appl. Phys., 109, 084305 (2011).
H. Goktas, F. G. Ince, A. Iscan, I. Yildiz, M. Kurt and I. Kaya, Synth. Met., 159, 2001 (2009).
P. Giungato, M. C. Ferrara, F. Musio and R. d’Agostino, Plasmas and Polymers, 1, 283 (1996).
K. Hozumi, K. Kitamura, H. Hashimoto, T. Hamaoka, H. Fujisawa and T. Ishizawa, J. Appl. Polym. Sci., 28, 1651 (1983).
N. V. Bhat and D. J. Upadhyay, Plasmas and Polymers, 8, 99 (2003).
Z. Jiang, Y. Meng, Z.-J. Jiang and Y. Shi, Surf. Rev. Lett., 16, 297 (2009).
M. C. Jobanputra, M. F. Durstock and S. J. Clarson, J. Appl. Polym. Sci., 87, 523 (2002).
A. J. Choudhury, J. Chutia, S. A. Barve, H. Kakati, A. R. Pal Jagannath, N. Mithal, R. Kishore, M. Pandey and D. S. Patil, Prog. Org. Coat., 70, 75 (2011).
R. H. Pedersen, D. J. Scurr, P. Roach, M. R. Alexander and N. Gadegaard, Plasma Process. Polym., 9, 22 (2012).
J. Fang, H. Chen and X. Yu, J. Appl. Polym. Sci., 80, 1434 (2001).
K. Li, O. Gabriel and J. Meichsner, J. Phys. D: Appl. Phys., 37, 588 (2004).
P. Mandlik, J. Gartside, L. Han, I.-C. Cheng, S. Wagner, J. A. Silvernail, R.-Q. Ma, M. Hack and J. J. Brown, Appl. Phys. Lett., 92, 103309 (2008).
S.-W. Seo, H. Chae, S. J. Seo, H. K. Chung and S. M. Cho, Appl. Phys. Lett., 102, 161908 (2013).
S.-W. Seo, E. Jung, H. Chae and S. M. Cho, Org. Electron., 13, 2436 (2012).
S.-I. Park, J.-H. Ahn, X. Feng, S. Wang, Y. Huang and J. A. Rogers, Adv. Funct. Mater., 18, 2673 (2008).
B. Despax and P. Raynaud, Plasma Process. Polym., 4, 127 (2007).
K. Kaneto, K. Yoshino and Y. Inuishi, Solid State Comm., 46, 389 (1983).
H. Yasuda, Plasma polymerization, Academic Press, New York (1985).
A. Gok and L. Oksuz, J. Macromol. Sci., Part. A: Pure Appl. Chem., 44, 1095 (2007).
C. A. Wilson, R. K. Grubbs and S. M. George, Chem. Mater., 17, 5625 (2005).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lim, S.H., Seo, SW., Lee, H. et al. Extremely flexible organic-inorganic moisture barriers. Korean J. Chem. Eng. 33, 1971–1976 (2016). https://doi.org/10.1007/s11814-016-0037-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0037-2