Skip to main content
Log in

A Study on Fatigue Life of Marine Isolation Rubber Based on Crack Initiation Method

  • Technical Article---Peer-Reviewed
  • Published:
Journal of Failure Analysis and Prevention Aims and scope Submit manuscript

Abstract

Uniaxial tension fatigue test (UTF) is often used in the field of fatigue life analysis of rubber materials. A UTF was conducted on a rubber material commonly used in marine rubber isolators, and the calculation method of its typical fatigue life was investigated by using the statistical method. Using the UTF data, seven different fatigue life evaluation parameters, such as maximum principal elongation rate and maximum principal engineering train, can be calculated. By fitting these parameters with the fatigue life obtained from the UTF, using the power-relation model, seven different fatigue life evaluation models based on these parameters can be established. The fitting effects of the seven models were compared and analyzed, and the results show that the model based on the maximum strain energy density has the optimized fitting performance. Therefore, using maximum strain energy density as the fatigue life evaluation parameter to analyze the fatigue life of rubber isolators can obtain more accurate results, which can be used to guide the structure and fatigue design of rubber isolators. As an example, the fatigue life of a marine rubber isolator is evaluated using the research results.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. J. Yan, Mechanical Vibration Isolation. (Science and Technology Documents Press of Shanghai, Shanghai, 1986)

    Google Scholar 

  2. Z. Ding, J. Chen, C. Song et al., Analysis of fatigue crack growth life for rubber vibration damper. J. Mech. Eng. 46(22), 58–64 (2010)

    Article  CAS  Google Scholar 

  3. W. Shangguan, X. Wang, B. Ye et al., Experiment and fatigue life prediction of filled natural rubber emphasizing on the effect of strain ratio. J. Mech. Eng. 49(8), 49–56 (2013)

    Article  Google Scholar 

  4. W. Wang, W. Shangguan, X. Duan et al., Study on prediction of fatigue life of rubber mount based on linear cumulative fatigue damage theory. J. Mech. Eng. 48(10), 56–65 (2012)

    Article  CAS  Google Scholar 

  5. Z. Jin, L. He, Y. Zhao et al., Useful life prediction of lifetime structural morphology deformable rubber isolator. J. Vib. Meas. Diag. 38(2), 248–253 (2018)

    Google Scholar 

  6. C.S. Woo, W.D. Kim, J. Kwon, A study on the material properties and fatigue life prediction of natural rubber component. Mater. Sci. Eng. A. 483(1), 376–381 (2008)

    Article  Google Scholar 

  7. C.S. Woo, H.S. Park, Useful lifetime prediction of rubber component. Eng. Fail. Anal. 18(7), 1645–1651 (2011)

    Article  CAS  Google Scholar 

  8. W.D. Kim, H.J. Lee, J.Y. Kim et al., Fatigue life evaluation of an engine rubber mount. Int. J. Fatigue. 26(5), 553–560 (2004)

    Article  CAS  Google Scholar 

  9. J.L. Poisson, F. Lacroix, S. Meo et al., Biaxial fatigue behavior of a polychloroprene rubber. Int. J. Fatigue. 33(8), 1151–1157 (2011)

    Article  CAS  Google Scholar 

  10. Q. Li, J.C. Zhao, B. Zhao, Fatigue life prediction of a rubber mount based on test of material properties and finite element analysis. Eng. Fail. Anal. 16(7), 2304–2310 (2009)

    Article  CAS  Google Scholar 

  11. S. Oman, M. Fajdiga, M. Nagode, Estimation of air-spring life based on accelerated experiments. Mater. Des. 31(8), 3859–3868 (2010)

    Article  Google Scholar 

  12. L. Sors, Fatigue Design of Machine Components. (Pergamon Press, Oxford, 1971)

    Google Scholar 

  13. X. Wang, W. Shangguan, T. Liu et al., Experiment of uniaxial tension fatigue and modeling of fatigue life for filled natural rubbers. J. Mech. Eng. 49(14), 65–73 (2013)

    Article  CAS  Google Scholar 

  14. J. Bonet, R.D. Wood, Nonlinear Continuum Mechanics for Finite Element Analysis. (Cambridge University Press, Cambridge, 1997)

    Google Scholar 

  15. GB/T 1688-2008, Determination of Tensile Fatigue of Vulcanized Rubber. (Standardization Administration, China, 2008)

    Google Scholar 

  16. L. He, C. Shuai, Vibration Theory and Engineering Application. (Science Press, Beijing, 2015)

    Google Scholar 

  17. J. Ding, H. Zhang, Z. Tong et al., Lifetime evaluation of rubber isolator for warship application. J. Vib. Shock. 29(12), 230–233 (2010)

    Google Scholar 

  18. Y. Wei, Q. Fang, Z. Jin et al., Research progress on constitutive model of filled rubber. Polym. Bull. 5, 15–21 (2014)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhu Jin.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jin, Z., Zhao, Yl. & Yang, X. A Study on Fatigue Life of Marine Isolation Rubber Based on Crack Initiation Method. J Fail. Anal. and Preven. 22, 2288–2294 (2022). https://doi.org/10.1007/s11668-022-01502-w

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11668-022-01502-w

Keywords

Navigation