Skip to main content
Log in

Effect of Plastic Deformation on the Corrosion Behavior of a Super-Duplex Stainless Steel

  • Published:
Journal of Materials Engineering and Performance Aims and scope Submit manuscript

Abstract

The role of plastic deformation on the corrosion behavior of a 25Cr-7Ni super-duplex stainless steel (SDSS) in a 3.5 wt.% sodium chloride solution at 90 °C was investigated. Different levels of plastic strain between 4 and 16% were applied to solution annealed tensile specimens and the effect on the pitting potential measured using potentiodynamic electrochemical techniques. A nonlinear relationship between the pitting potential and the plastic strain was recorded, with 8 and 16% causing a significant reduction in average E p, but 4 and 12% causing no significant change when compared with the solution-annealed specimens. The corrosion morphology revealed galvanic interaction between the anodic ferrite and the cathodic austenite causing preferential dissolution of the ferrite. Mixed potential theory and the changing surface areas of the two phases caused by the plastic deformation structures explain the reductions in pitting potential at certain critical plastic strain levels. End-users and manufacturers should evaluate the corrosion behavior of specific cold-worked duplex and SDSSs using their as-produced surface finishes assessing in-service corrosion performance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. S.S.M. Tavares, V.F. Terra, J.M. Parada, and M.P. Cindra Fonseca, Influence of the Microstructure on the Toughness of a Duplex Stainless Steel UNS S31803, J. Mater. Sci., 2005, 40, p 145–154

    Article  CAS  Google Scholar 

  2. J.O. Nilsson, Super Duplex Stainless Steel, Mater. Sci. Technol., 1992, 8, p 685–700

    CAS  Google Scholar 

  3. A.W. Glass. Research Report 409: High Pressure, High Temperature Developments in the United Kingdom Continental Shelf. Health and Safety Executive, 2005

  4. C. Coussement and D. Fruytier, An Industrial Application of Duplex Stainless Steel in the Petrochemical Industry: A Case Study, Failure Analysis and Subsequent Investigations, Duplex Stainless Steels ’91, Vol. 1, J. Charles and S. Bernhardsson, Eds., Les editions de physique, 1991, p 521–529

  5. I.M. Hannah and D. Seymour, Shearwater super-duplex tubing failure investigation NACE-International Corrosion Conference Series, 2006, paper 77053

  6. U. Kamachi Mudali, P. Shankar, S. Ningshen, Sanjay Rai, and R.K. Dayal, Pitting corrosion studies on cold worked nitrogen-bearing austenitic stainless steels, 7th International Symposium on Electrochemical Methods in Corrosion Research, 2000, Paper 125, Proceedings of EMCR2000

  7. U. Kamachi Mudali, P. Shankar, S. Ningshen, R.K. Dayal, H.S. Khatak, and B. Raj, On the Pitting Corrosion Resistance of Nitrogen Alloyed Cold Worked Austenitic Stainless Steels, Corros. Sci., 2002, 44(10), p 2183–2198

    Article  CAS  Google Scholar 

  8. A. Barbucci, G. Cerisola, and P.L. Cabot, Effect of Cold Working in the Passive Behaviour of 304 Stainless Steel in Sulfate Media, J. Electrochem. Soc., 2002, 149(12), p B534–B542

    Article  CAS  Google Scholar 

  9. L. Peguet, B. Malki, and B. Barouxtitle, Influence of Cold Working on the Pitting Corrosion Resistance of Stainless Steels, Corros. Sci., 2007, 49(4), p 1933–1948

    Article  CAS  Google Scholar 

  10. Y. Fu, X. Wu, E. Han, W. Ke, K. Yang, and Z. Jiang, Influence of Cold Work on Pitting Corrosion Behaviour of a High Nitrogen Stainless Steel, J. Electrochem. Soc., 2008, 155(8), p C455–C463

    Article  CAS  Google Scholar 

  11. J. Johansson and M. Oden, Load Sharing Between Austenite and Ferrite in a Duplex Stainless Steel During Cyclic Loading, Metall. Mater. Trans. A, 2000, 31A, p 1557–1570

    Article  CAS  Google Scholar 

  12. I. Serre, D. Salazar, and J.-B. Vogt, Atomic Force Microscopy Investigation of Surface Relief in Individual Phases of Deformed Duplex Stainless Steel, Mater. Sci. Eng. A, 2008, 492, p 428–433

    Article  Google Scholar 

  13. S. Fréchard, F. Martin, C. Clément, and J. Cousty, AFM and EBSD Combined Studies of Plastic Deformation in a Duplex Stainless Steel, Mater. Sci. Eng. A, 2006, 418, p 312–319

    Article  Google Scholar 

  14. S. Bernhardsson. The Corrosion Resistance of Duplex Stainless Steels, Duplex Stainless Steels ’91, Vol. 1, J. Charles and S. Bernhardsson, Eds., Les editions de physique, 1991, p 185–210

  15. Y.-H. Yau and M.A. Streicher, Galvanic Corrosion of Duplex FeCr-10%Ni Alloys in Reducing Acids, Corrosion, 1987, 43(6), p 366–373

    CAS  Google Scholar 

  16. W.-T. Tsai and J.-R. Chen, Galvanic Corrosion Between the Constituent Phases in Duplex Stainless Steel, Corros. Sci., 2007, 29, p 3659–3668

    Article  Google Scholar 

  17. M. Femenia, C. Canalias, J. Pan, and C. Leygraf, Scanning Kelvin Probe Force Microscopy and Magnetic Force Microscopy for Characterization of Duplex Stainless Steels, J. Electrochem. Soc., 2003, 150(6), p B274–B281

    Article  CAS  Google Scholar 

  18. K. Takizawa, Y. Shimizu, E. Yoneda, S. Hokoto, and I. Tamura, Effect of Cold Work and Heat Treatment on Stress Corrosion Cracking Behaviour of Duplex Stainless Steel, Trans. Iron Steel Inst. Jpn., 1979, 65(6), p 617–626 (in Japanese)

    CAS  Google Scholar 

  19. P.C. Pistorius and G.T. Burstein, Metastable Pitting Corrosion of Stainless Steel and the Transition to Stability, Philos. Trans. Phys. Sci. Eng., 1992, 341(1662), p 531–559

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Neill C. Renton.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Renton, N.C., Elhoud, A.M. & Deans, W.F. Effect of Plastic Deformation on the Corrosion Behavior of a Super-Duplex Stainless Steel. J. of Materi Eng and Perform 20, 436–444 (2011). https://doi.org/10.1007/s11665-010-9688-z

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11665-010-9688-z

Keywords

Navigation