Skip to main content
SpringerLink
Log in

Creep Performance Modeling of Modified 9Cr-1Mo Steels with Oxidation

  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

In this study, the deformation-mechanism-based true-stress (DMTS) creep model is modified to include oxidation influence on the long-term creep performance of modified 9Cr-1Mo steels. An area-deduction method is introduced to evaluate oxide scale formation on the creep coupons, which is incorporated into the DMTS model formulated based on intragranular dislocation glide (IDG), intragranular dislocation climb (IDC), and grain boundary sliding (GBS) mechanisms, in modifying the true stress. Thus, the modified DMTS model can not only describe the creep curve, but also predict the long-term creep life and failure mode, which is shown to be in good agreement with the creep data generated in the authors’ laboratory as well as by the National Institute for Materials Science (NIMS) of Japan for long-term (> 104 hours) creep life prediction on Grade 91 steels. In particular, the predictability of the model is demonstrated in comparison with the Larson–Miller parameter method. In addition, the modified DMTS model provides quantitative information of mechanism partitioning, insinuating the failure mode via intragranular/intergranular deformation. Therefore, it has advantages over the empirical models in providing physical insights of creep failure, which can be useful to material design for performance optimization.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. E.N. DaC Andrade: Proc. R. Soc. A, 1910, vol. 90, pp.329-42.

    Google Scholar 

  2. 2.H. J. Frost and M. F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Elmsford, NY, 1982, pp. 1-19.

    Google Scholar 

  3. T.G. Langdon: Philos. Mag. Phil. Mag., 1970, vol. 22, pp. 689-700.

    Article  Google Scholar 

  4. 4.H. Lüthy, R.A. White, and O.D. Sherby: Mater. Sci. Eng., 1979, vol. 39, pp. 211–16.

    Article  Google Scholar 

  5. 5.X.J. Wu and A.K. Koul: Metall. Mater. Trans. A, 1995, vol. 26, pp. 905–14.

    Article  CAS  Google Scholar 

  6. 6.F. Larson and J. Miller: Trans. ASME, 1952, vol. 74, p. 765.

    Google Scholar 

  7. 7.F. C. Monkman and N. J. Grant: ASTM Proceeding, 1956, vol. 56, pp. 593–620.

    Google Scholar 

  8. 8.B. Wilshire and P.J. Scharning: Mater. Sci. Technol., 2009, vol. 25, pp. 243-48.

    Article  Google Scholar 

  9. Allen and S. Garwood: Energy Materials-Strategic Research Agenda. Q2, Materials Energy Review, the Institute of Materials, Minerals and Mining, London, 2007.

  10. K. Kimura and Y. Takahashi: Proc. ASME 2012 Press. Vessel. Pip. Conf., 2012, pp. 1–8.

  11. 11.K. Kimura, M. Tabuchi, Y. Takahashi, K. Yoshida, and K. Yagi: Int. J. Microstruct. Mater. Prop., 2011, vol. 6, p. 72.

    CAS  Google Scholar 

  12. K. Kimura and M. Yaguchi: in Proc. ASME. Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, 2016, p. 9.

  13. J. D. Parker: in Proc. Sustainable Industrial Processing Summit & Exhibition 2018, Vol. 6, 4–7 November 2018, Rio De Janeiro, Brazil.

  14. 14.M.F. Ashby and B.F. Dyson: Fracture 84, 1984, pp. 3–30.

    Article  Google Scholar 

  15. 15.B.F. Dyson and S. Osgerby: Mater. Sci. Technol., 1987, vol. 3, pp. 545-53.

    Article  CAS  Google Scholar 

  16. 16.X.Z. Zhang, X.J. Wu, R. Liu, J. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2017, vol. 689, pp. 345–52.

    Article  CAS  Google Scholar 

  17. 17.X. J. Wu, S. Williams, and D. Gong: J. Mater. Eng. Perform., 2012, vol. 21: pp. 2255-62.

    Article  CAS  Google Scholar 

  18. National Institute for Materials Science (Japan): Creep Data Sheet (CDS), No. 43A, 10 Oct 2016.

  19. 19.M. Danielewski: Solid State Phenomena, 1992, vol. 21&22, pp.103-134.

    Article  Google Scholar 

  20. 20.B.F. Dyson and T.B. Gibbons: Acta Metall., 1987, vol. 35, pp. 2355-69.

    Article  CAS  Google Scholar 

  21. 21.F. Abe: Metall. Mater. Trans. A., 2015, vol. 46, pp. 5610–25.

    Article  Google Scholar 

  22. 22.F. Abe: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 565–69.

    Article  Google Scholar 

  23. F. Abe, M. Taneike, and K. Sawada: Int. J. Press. Vessel. Pip., 2007, vol. 84, pp. 3–12.

    Article  CAS  Google Scholar 

  24. 24.M. Yurechko, C. Schroer, O. Wedemeyer, A. Skrypnik, and J. Konys: Journal of Nuclear Materials, 2011, vol. 419, pp. 320–8.

    Article  CAS  Google Scholar 

  25. 25.P. Mathiazhagan and S. Khanna: High Temp. Mater. Proc., 2011, vol.1–2, pp. 43–50.

    Google Scholar 

  26. 27.X.Z. Zhang, X.J. Wu, R. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2019, vol. 743, pp. 418-24.

    Article  CAS  Google Scholar 

  27. 28.T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, and K.K. Rink: Mater. Sci. Eng. A, 2013, vol. 565, pp. 382–91.

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors are grateful for the CRD funding from Natural Science & Engineering Research Council of Canada (NSERC) (Grant No. 100979-NSERC-CRD-2013), the collaborative support from National Research Council Canada (NRC) and both financial and in-kind support from Kennametal Stellite Inc.

Author information

Authors and Affiliations

  1. Structures and Materials Performance Laboratory, Aerospace Research Center, National Research Council Canada, Ottawa, ON, K1A 0R6, Canada

    X. J. Wu

  2. Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON, K1S 5B6, Canada

    X. Z. Zhang & R. Liu

  3. Kennametal Stellite Inc., Belleville, ON, K8N 1G2, Canada

    M. X. Yao

Authors
  1. X. J. Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. X. Z. Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. R. Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. M. X. Yao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to X. J. Wu.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Manuscript submitted March 4, 2019.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wu, X.J., Zhang, X.Z., Liu, R. et al. Creep Performance Modeling of Modified 9Cr-1Mo Steels with Oxidation. Metall Mater Trans A 51, 1134–1147 (2020). https://doi.org/10.1007/s11661-019-05588-0

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11661-019-05588-0

Search

Navigation