Abstract
A new kind of Ni-Co–base disk alloys, named TMW alloys, has been developed on the basis of our innovative concept. Full-scale pancakes (440 mm in diameter and 65 mm in thickness) with an average grain size of about 10 μm were successfully manufactured from TMW alloys by a conventional cast-and-wrought (C&W) processing route. The property assessments of the pancakes indicate that TMW alloys are superior to C&W U720Li alloys in tensile strength and in creep resistance, while the performances of low-cycle fatigue (LCF) and fatigue crack growth (FCG) are comparative.
Similar content being viewed by others
References
K.P. Rohrbach: Adv. Mater. Process., 1995, vol. 148, pp. 37–40.
D. Furrer and H. Fecht: JOM, 1999, No. 1, pp. 33–36.
D. Brewer: Mater. Sci. Eng. A, 1999, vol. 261 (1), pp. 284–91.
S.J. Hessell, W. Voice, A.W. James, S.A. Blackham, C.J. Small, and M.R. Winstone: U.S. Patent 6,132,527, 2000.
T.P. Gabb and K. O’Connor: “High Temperature, Slow Strain Rate Forging of Advanced Disk Alloy ME3,” NASA TM 2001-210901, 2001.
T.E. Howson, W.H. Couts, and J.E. Coyne: Superalloys 1984, TMS, Warrendale, PA, 1984, pp. 275–84.
C.Y. Cui, Y.F. Gu, H. Harada, and A. Sato: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2921–27.
Y.F. Gu, H. Harada, C.Y. Cui, D.H. Ping, A. Sato, and J. Fujioka: Scripta Mater., 2006, vol. 55, pp. 815–18.
C.Y. Cui, Y.F. Gu, H. Harada D.H. Ping, and A. Sato: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3183–90.
T. Fukuda, Y. Gu, C. Cui, and H. Harada: J. Jpn. Inst. Met., 2007, vol. 71 (9), pp. 667–71.
C. Cui, Y. Gu, D. Ping, and H. Harada: Intermetallics, 2008, vol. 16 (7), pp. 910–16.
C. Cui, Y. Gu, D. Ping, and H. Harada: Mater. Sci. Eng. A, 2008, vol. 485, pp. 651–56.
C. Cui, Y.F. Gu, D. Ping, T. Fukuda, and H. Harada: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 424–27.
Y.F. Gu, C. Cui, H. Harada, T. Fukuda, D. Ping, A. Mitsuhashi, K. Kato, T. Kobayashi and J. Fujioka: Superalloys 2008, TMS, Warrendale, PA, 2008, pp. 53–61.
Y.F. Gu, C. Cui, D. Ping, H. Harada, T. Fukuda, and J. Fujioka: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 250–55.
C. Cui, Y. F. Gu, D. Ping, H. Harada: Metall. Mater. Trans. A, 2009, vol. 40 (2), pp. 282–91.
Annual Book of ASTM Standards, E8/E21, ASTM, West Conshohocken, PA, 2005.
Annual Book of ASTM Standards, E139, ASTM, West Conshohocken, PA, 2000.
Annual Book of ASTM Standards, E606, ASTM, West Conshohocken, PA, 2004.
Annual Book of ASTM Standards, E647, ASTM, West Conshohocken, PA, 2005.
F.R. Larson and J. Miller: Trans. ASME, vol. 74, pp. 765–75.
Annual book of ASTM Standards, E399, ASTM, West Conshohocken, PA, 1997.
P.C. Paris, M.P. Gomez, and W. E. Anderson: The Trend in Engineering, 1961, vol. 13, pp. 9–14.
The authors thank the New Energy and Industrial Technology Development Organization (NEDO) of Japan for providing financial support and permission to publish this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted May 8, 2009.
Rights and permissions
About this article
Cite this article
Gu, Y., Fukuda, T., Cui, C. et al. Comparison of Mechanical Properties of TMW Alloys, New Generation of Cast-and-Wrought Superalloys for Disk Applications. Metall Mater Trans A 40, 3047–3050 (2009). https://doi.org/10.1007/s11661-009-0032-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-009-0032-x