Skip to main content
Log in

The precipitation and effect of nano nitrides in HSLC steel

  • Published:
Science in China Series E: Technological Sciences Aims and scope Submit manuscript

Abstract

The existing forms of N and Al in HSLC (high strength low carbon) steel produced by TSCR (thin slab casting and rolling process), the precipitation thermodynamics and kinetics of AlN, and its effects on structure and mechanical property are studied. The experimental results show that only a small quantity of nitrogen is combined into AlN in HSLC steel produced by TSCR and most of the nitrogen in steel is still free nitrogen. Aluminum-nitride is mainly precipitated during the period of slow air cooling after coiling, but not during rolling and water cooling. The acid-soluble aluminum has no obvious effect on the grain size and mechanical property of HSLC steel produced by TSCR whose acid-soluble aluminum content is 0.005%–0.043%. The precipitation of AlN is not the main cause of grain refinement of HSLC steel produced by TSCR, nor is AlN the dominating precipitate that has precipitation strengthening effect. The nano nitrides are not pure AlN, but have complex compositions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Morrison W B. Nitrogen in the steel product. Ironmaking and Steelmaking, 1989, 16(2): 123–128

    Google Scholar 

  2. Michel J P, Jonas J J. Precipitation kinetics and solute strengthening in high temperature austenites containing Al and N. Acta Metallurgica, 1981, 29: 513–526

    Article  Google Scholar 

  3. Kiichi Narita. Physical chemistry of the groups IVa(Ti, Zr), Va(V, Nb, Ta) and the rare earth elements in steel. Trans ISIJ, 1975, 15: 145–152

    Google Scholar 

  4. Irvine K J, Pickering F B, Gladman T. Grain-refined C-Mn steels. J Iron and Steel Institute, 1967, 161–182

  5. Erasmus L A. Effect of aluminum additions on forgeability, austenite grain coarsening temperature, and impact properties of steel. J Iron and Steel Institute, 1964, 32–41

  6. Gladman T, Pickering F B. Grain-coarsening of austenite. J Iron and Steel Institute, 1967, 653–664

  7. Kang Y L, Yu H, Fu J, et al. Morphology and precipitation kinetics of AlN in hot strip of low carbon steel produced by compact strip production. Mater Sci Eng A, 2003, 351(1–2): 265–271

    Google Scholar 

  8. Yong Q L. The Second Phase in Iron and Steel Materials (in Chinese). Beijing: Metallurgical Industry Press, 2006

    Google Scholar 

  9. Fu J, Wu H J, Liu Y C, et al. Nano-scaled iron-carbon precipitates in HSLC and HSLA steels. Sci China Ser E-Tech Sci, 2007, 50(2): 166–176

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jie Fu.

Additional information

Supported by the National Natural Science Foundation of China (Grant No. 50334010) and the State Foundation for Key Projects: New Generation of Steels (Grant No. G1998061500)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Fu, J., Liu, Y. & Wu, H. The precipitation and effect of nano nitrides in HSLC steel. Sci. China Ser. E-Technol. Sci. 51, 989–998 (2008). https://doi.org/10.1007/s11431-008-0059-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-008-0059-z

Keywords

Navigation