Abstract
This paper proposes low power, low voltage Truly Random Number Generators (TRNG) for Electrical Product Code (EPC Generation 2 Radio Frequency Identification (RFID) tag. Design considerations and trade-offs among randomicity, chip area and power consumption are analyzed according to the special requirements of Gen2 RFID tag. The proposed TRNG circuits consist of an analog random seed generator which uses the oscillator sampling mechanism, and Linear Feedback Shift Registers for post digital processing. These TRNG are implemented in SMIC 0.18 μm CMOS process. And their randomicity performances are verified by the FIPS 140-2 standard for security. One of the TRNG circuits outputs a random bit series at a speed of 40 kHz. Its power consumption is 1.04 μW and chip area is 0.05 mm2. The other one has a bit rate at 48 kHz. It has a power consumption of 2.6 μW and chip area of 0.018 mm2. The features of low power and small chip area in these TRNG circuits provide a good choice to solve the security and privacy problems in RFID systems.
Similar content being viewed by others
Explore related subjects
Discover the latest articles and news from researchers in related subjects, suggested using machine learning.References
EPCTM Radio-frequency identity protocols class-1 generation-2 UHF RFID protocol for communications at 860 MHz–960 MHz Version 1.1.0 (pp. 40). http://www.epcglobalinc.org/standards/uhfc1g2/uhfc1g2_1_1_0-standard-20071017.pdf.
Balachandran G., Barnett R. (2008) A 440-nA true random number generator for passive RFID tags. IEEE Transactions on Circuits and Systems I: Regular Papers 55(11): 3723–3732
Bucci, M., Germani, L., Luzzi, R., et al. (2003). A high-speed oscillator-based truly random number source for cryptographic applications on a smart card IC. IEEE Transactions on Computers, 52(4).
Holleman, J., & Otis, B. (2006). A 2.92 μW hardware random number generator. In Proceedings of the 32nd European solid-state circuits conference (pp. 134–137).
Dichtl, M. (2003). How to predict the output of a hardware random number generator. In Workshop on cryptographic hardware and embedded systems, LNCS (Vol. 2779, pp.181–188), 2003.
Luo, Q., Guo, L., Li, Q., et al. (2009). A low-power dual-clock strategy for digital circuits of EPC Gen2 RFID tag. International RFID conference (pp. 7–14).
Che, W., Deng, H., Tan, X., et al. (2007). Scheme of truly random number generator application in RFID Tag. http://www.autoidlabs.org/single-view/dir/article/6/231/page.html.
Xin, Q., Zeng, X., et al. (2005). Modeling and system simulation of truly random number generator. Journal of System Simulation, 17(1).
Golic, J. (2006). New methods for digital generation and post processing of random data. Transactions on Computers, 55(10).
Pillai V., Heinrich H. (2007) An ultra-low-power long range battery/passive RFID tag for UHF and microwave bands with a current consumption of 700 nA at 1.5 V. IEEE Transactions on Circuits and Systems I Regular Papers 54(7): 1500–1512
Barnett, R., Balachandran, G., Lazar, S., et al. (2007). A passive UHF RFID transponder for EPC Gen 2 with −14 dBm sensitivity in 0.13μm CMOS. IEEE ISSCC Dig Tech Papers.
Petrie C., Connelly J. (1996) Modeling and simulation of oscillator-based random nunmber generators. IEEE International Symposium on Circuits and Systems 4: 324–327
National Institute of Standards and Technology USA, FIPS PUB 140-2 Federal Information Processing Standards. Publication. http://csrc.nist.gov/publications/fips/fips140-2/fips1402.pdf.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, W., Che, W., Yan, N. et al. Ultra-Low Power Truly Random Number Generator for RFID Tag. Wireless Pers Commun 59, 85–94 (2011). https://doi.org/10.1007/s11277-010-0191-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-010-0191-5