Abstract
In this study, quince seed mucilage (QSM)-polyvinyl alcohol (PVA) nanofibers were produced by the electrospinning technique. Glutaraldehyde (GA) was used to provide crosslinking of QSM with PVA. The crosslinking was examined by Fourier transform infrared (FT-IR) spectroscopy. The morphology of the produced nanofibers was characterized using a scanning electron microscope (SEM). From SEM images, the average diameter was 156.6 nm and the structures produced were smooth and bead-free. A method has been developed for preconcentration of Cu(II), Ni(II), and Zn(II) ions by using columns filled with nanofibers whose characterization processes have been completed and then to be determined by high-resolution continuous light source flame atomic absorption spectrometry (HR-CS FAAS). In addition, the advantages of the method developed with QSM-PVA nanofibers were demonstrated by comparing the preconcentration conditions with QSM-PVA and PVA nanofibers. At optimum conditions determined experimentally, the recoveries of Cu(II), Ni(II), and Zn(II) were found to be 98.2 ± 3.5, 96.1 ± 3.7, and 98.1 ± 3.2 respectively. LOD and adsorption capacity of nanofibers for Cu(II), Ni(II), and Zn(II) were found to be 0.53; 0.55; and 0.17 μg/L and 434.78; 65.36; and 28.41 mg/g respectively. The accuracy of the developed method has been determined by analyzing certified reference material (CRM) and spiked samples.
Similar content being viewed by others
Data Availability
All data generated or analyzed during this study are included in this manuscript.
References
Abd El-aziz, A. M., El-Maghraby, A., & Taha, N. A. (2017). Comparison between polyvinyl alcohol (PVA) nanofiber and polyvinyl alcohol (PVA) nanofiber/hydroxyapatite (HA) for removal of Zn2+ ions from wastewater. Arabian Journal of Chemistry, 10(8), 1052–1060. https://doi.org/10.1016/j.arabjc.2016.09.025
Abdolmohammad-Zadeh, H., Ayazi, Z., & Hosseinzadeh, S. (2019). Application of Co3O4 nanoparticles as an efficient nano-sorbent for solid-phase extraction of zinc (II) ions. Microchemical Journal, 153, 104268. https://doi.org/10.1016/j.microc.2019.104268
Alghoraibi, I. & Alomari, S. (2018). Different methods for nanofiber design and fabrication. Handbook of nanofibers, 1-46.https://doi.org/10.1016/j.microc.2019.104268
Baghban, N., Yilmaz, E., & Soylak, M. (2017). A magnetic MoS2-Fe3O4 nanocomposite as an effective adsorbent for dispersive solid-phase microextraction of lead (II) and copper (II) before their determination by FAAS. Microchimica Acta, 184(10), 3969–3976. https://doi.org/10.1007/s00604-017-2384-z
Balaji, A.B., Pakalapati, H., Khalid, M., Walvekar, R., & Siddiqui, H. (2018). Natural and synthetic biocompatible and biodegradable polymers. Navinchandra Gopal Shimpi. Biodegradable and biocompatible polymer composites. Oxford: Elsevier 3–32. https://doi.org/10.1016/B978-0-08-100970-3.00001-8
Barhoum, A., Pal, K., Rahier, H., Uludag, H., Kim, I. S., & Bechelany, M. (2019). Nanofibers as new-generation materials: From spinning and nano-spinning fabrication techniques to emerging applications. Applied Materials Today, 17, 1–35. https://doi.org/10.1016/j.apmt.2019.06.015
Behbahani, M., Salarian, M., Bagheri, A., Tabani, H., Omidi, F., & Fakhari, A. (2014). Synthesis, characterization, and analytical application of Zn (II)-imprinted polymer as an efficient solid-phase extraction technique for trace determination of zinc ions in food samples. Journal of Food Composition and Analysis, 34(1), 81–89. https://doi.org/10.1016/j.jfca.2013.10.003
Feng, R., Hu, X., Ma, Y., Sun, L., Lv, Y., Row, K. H., & Zhu, T. (2020). Synthesis of poly (styrene-divinylbenzene) by nano-TiO2 and the application for pipette-tip solid-phase extraction of flavonoid in Epipremnum aureum rhizome. Separation Science and Technology, 55(13), 22942302. https://doi.org/10.1080/01496395.2019.1624571
Hosseinzadeh, H., & Mohammadi, S. (2015). Quince seed mucilage magnetic nanocomposites as novel adsorbents for efficient removal of cationic dyes from aqueous solutions. Carbohydrate Polymers, 134, 213–221. https://doi.org/10.1016/j.carbpol.2015.08.008
Jouki, M., Yazdi, F. T., Mortazavi, S. A., & Koocheki, A. (2013). Physical, barrier and antioxidant properties of a novel plasticized edible film from quince seed mucilage. International Journal of Biological Macromolecules, 62, 500–507. https://doi.org/10.1016/j.ijbiomac.2013.09.031
Kafkas, S., Imrak, B., Kafkas, N.E., Sarier, A., & Kuden, A. (2018). Quince (Cydonia oblonga Mill.) Breeding. In: Al-Khayri, J., Jain, S., & Johnson, D. (Eds.), Advances in plant breeding strategies: Fruits. Springer. https://doi.org/10.1007/978-3-319-91944-7_7
Kahraman, H. T., Yar, A., Avci, A., & Pehlivan, E. (2018). Preparation of nanoclay incorporated PAN fibers by electrospinning technique and its application for oil and organic solvent absorption. Separation Science and Technology, 53(2), 303–311. https://doi.org/10.1080/01496395.2017.1384018
Lim, C. T. (2017). Nanofiber technology: Current status and emerging developments. Progress in Polymer Science, 70, 1–17. https://doi.org/10.1016/j.progpolymsci.2017.03.002
Madhavamoorthi, P. (2005). Nanofibers and nanofiber web: A new class of nonwovens. Synthetic Fibres, 34, 12–18.
Mehrani, Z., Ebrahimzadeh, H., Asgharinezhad, A. A., & Moradi, E. (2019). Determination of copper in food and water sources using poly m-phenylenediamine/CNT electrospun nanofiber. Microchemical Journal, 149, 103975. https://doi.org/10.1016/j.microc.2019.103975
Mohammadi, S. Z., Hamidian, H., Karimzadeh, L., & Moeinadini, Z. (2016). Tween 80 coated alumina: An alternative support for solid-phase extraction of copper, nickel, cobalt, and cadmium before flame atomic absorption spectrometric determination. Arabian Journal of Chemistry, 9, 1290–1296. https://doi.org/10.1016/j.arabjc.2012.02.002
Pourreza, N., Zolgharnein, J., Kiasat, A. R., & Dastyar, T. (2010). Silica gel–polyethylene glycol as a new adsorbent for solid-phase extraction of cobalt and nickel and determination by flame atomic absorption spectrometry. Talanta, 81(3), 773–777. https://doi.org/10.1016/j.talanta.2010.01.010
Santos, C., Silva, C. J., Büttel, Z., Guimarães, R., Pereira, S. B., Tamagnini, P., & Zille, A. (2014). Preparation and characterization of polysaccharides/PVA blend nanofibrous membranes by electrospinning method. Carbohydrate Polymers, 99, 584–592. https://doi.org/10.1016/j.carbpol.2013.09.008
Santos, L.B., Barreto, J.A., dos Santos de Assis, R., de Souza, C.T., Ferreira, S.L.C., Novaes, C.G., & Lemos, V.A. (2020). Solid-phase extraction and detection by digital image directly in the sorbent: Determination of nickel in environmental samples. Water, Air, & Soil Pollution, 231(9), 1-9.https://doi.org/10.1007/s11270-020-04838-x
Sarhan, W. A., & Azzazy, H. M. (2015). High concentration honey chitosan electrospun nanofibers: Biocompatibility and antibacterial effects. Carbohydrate Polymers, 122, 135–143. https://doi.org/10.1016/j.carbpol.2014.12.051
Shakerian, F., Chelongar, Y., Shabani, A. M., & Dadfarnia, S. (2019). Mixed hemimicelles solid-phase extraction based on sodium dodecyl sulfate-coated nano-magnets Fe3O4 for the simultaneous separation and preconcentration of cobalt and nickel. Microchemical Journal, 146, 234–238. https://doi.org/10.1016/j.microc.2019.01.004
Sharma, R., Joshi, V.K., & Rana, J.C. (2011). Nutritional composition and processed products of quince (Cydonia oblonga Mill.) Indian Journal of Natural Products and Resources, 2(3), 354–357.
Shi, D., Ren, A., Tang, X., Qi, G., Xu, Z., Chai, G., & Kong, Y. (2018). MYB52 negatively regulates pectin demethylesterification in seed coat mucilage. Plant Physiology, 176(4), 2737–2749. https://doi.org/10.1104/pp.17.01771
Si, R., Wu, C., Yu, D., Ding, Q., & Li, R. (2021). Novel TEMPO-oxidized cellulose nanofiber/polyvinyl alcohol/polyethylenimine nanoparticles for Cu2+ removal in water. Cellulose, 28(17), 10999–11011. https://doi.org/10.1007/s10570-021-04236-4
Sricharoen, P., Limchoowong, N., Areerob, Y., Nuengmatcha, P., Techawongstien, S., & Chanthai, S. (2017). Fe3O4/hydroxyapatite/graphene quantum dots as a novel nano-sorbent for preconcentration of copper residue in Thai food ingredients: Optimization of ultrasound-assisted magnetic solid-phase extraction. Ultrasonics Sonochemistry, 37, 83–93. https://doi.org/10.1016/j.ultsonch.2016.12.037
Tamri, P., Hemmati, A., & Boroujerdnia, M. G. (2014). Wound healing properties of quince seed mucilage: In vivo evaluation in rabbit full-thickness wound model. International Journal of Surgery, 12(8), 843–847. https://doi.org/10.1016/j.ijsu.2014.06.016
Tokay, F., & Bağdat, S. (2015). Simultaneous preconcentration of Cd (II) and Pb (II) with N, N′-bis (4-methoxysalicylidene) ethylenediamine coated silica gel prior to determination by flame atomic absorption spectrometry. Water, Air, & Soil Pollution, 226(3), 1–9. https://doi.org/10.1007/s11270-015-2352-3
Tunçeli, A., Ulaş, A., Acar, O., & Türker, A. R. (2019). Solid-phase extraction of cadmium and lead from water by Amberlyst 15 and determination by flame atomic absorption spectrometry. Bulletin of Environmental Contamination and Toxicology, 102(2), 297–302. https://doi.org/10.1007/s00128-018-2498-y
Turan, K., SaygiliCanlidinç, R., & Kalfa, O. M. (2018). Determination of trace amounts of Co (II) after preconcentration with surface ion imprinted sorbent based on activated carbon. Separation Science and Technology, 53(5), 707–716. https://doi.org/10.1080/01496395.2017.1405989
Turker, A. R. (2016). Speciation of trace metals and metalloids by solid phase extraction with spectrometric detection: A critical review. Turkish Journal of Chemistry, 40(6), 847–867. https://doi.org/10.3906/kim-1603-134
Tuzen, M., Soylak, M., & Elci, L. (2005). Multi-element pre-concentration of heavy metal ions by solid-phase extraction on Chromosorb 108. Analytica Chimica Acta, 548(1–2), 101–108. https://doi.org/10.1016/j.aca.2005.06.005
Ullah, S., Hashmi, M., Hussain, N., Ullah, A., Sarwar, M. N., Saito, Y., Kim, S. H., & Kim, I. S. (2020). Stabilized nanofibers of polyvinyl alcohol (PVA) crosslinked by unique method for efficient removal of heavy metal ions. Journal of Water Process Engineering, 33, 101111. https://doi.org/10.1016/j.jwpe.2019.101111
Vellaichamy, S., & Palanivelu, K. (2011). Preconcentration and separation of copper, nickel, and zinc in aqueous samples by flame atomic absorption spectrometry after column solid-phase extraction onto MWCNTs impregnated with D2EHPA-TOPO mixture. Journal of Hazardous Materials, 185(2–3), 1131–1139. https://doi.org/10.1016/j.jhazmat.2010.10.023
Yavuz, E., Tokalioğlu, Ş, & Patat, Ş. (2018). Core-shell Fe3O4 polydopamine nanoparticles as sorbent for magnetic dispersive solid-phase extraction of copper from food samples. Food Chemistry, 263, 232–239. https://doi.org/10.1016/j.foodchem.2018.04.134
Zhang, D., Wang, M., Ren, G. J., & Song, E. J. (2013). Preparation of biomorphic porous calcium titanate and its application for preconcentration of nickel in water and food samples. Materials Science and Engineering: C, 33(8), 4677–4683. https://doi.org/10.1016/j.msec.2013.07.030
Zhang, K., Li, Z., Deng, N., Ju, J., Li, Y., Cheng, B.i Kang, W., & Yan, J. (2019). Tree-like cellulose nanofiber membranes modified by citric acid for heavy metal ion (Cu2+) removal. Cellulose, 26(2), 945-958https://doi.org/10.1007/s10570-018-2138-z
Zhao, S., Huang, G., Fu, H., & Wang, Y. (2014). Enhanced coagulation/flocculation by combining diatomite with synthetic polymers for oily wastewater treatment. Separation Science and Technology, 49(7), 999–1007. https://doi.org/10.1080/01496395.2013.877035
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tekin, M.D., Kalfa, O.M. Preconcentration of Some Heavy Metals with Novel Electrospun Nanofiber Including Quince Seed Mucilage. Water Air Soil Pollut 233, 206 (2022). https://doi.org/10.1007/s11270-022-05680-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11270-022-05680-z