Abstract
The influence of fabrication tolerances on the minimum bending radius of both rectangular and trapezoidal single-mode rib waveguides on silicon on insulator (SOI) is analyzed. In order to reduce the number of simulations, we present a semi-analytical procedure which yields an estimation of the bending radius, and facilitates the interpolation of the obtained data. We conclude that the tolerances of today’s fabrication processes hinders the miniaturization of integrated circuits if single-mode behavior is required. Besides, the sidewall angle tapering in 90° turns of wet etched waveguides is analyzed in a worst case approach.
Similar content being viewed by others
References
Chan S., Png C., Soon L., Reed G.T, Passaro V., (2005). Lightwave Technol. 23: 2103
Dai D., He S., (2004a). Optical Soc. Am. A 21, 131
Dai D., He S., (2004b). Appl. Optics 43: 1156
Deng H., Yevick D.O, Brooks C, Jessop P.E., (2005). J. Lightwave Technol. 23: 432
Jalali B., Yegnanarayanan S, Yoon T, Yoshimoto T, Rendina I, Coppinger F. (1998). Select. Topics Quant. Electr. 4, 938
Kiyat I., Aydinli A., Dagli N., (2005). Optics Expr. 13: 1900
Lousteau J., Furniss D, Seddon A.B, Benson T.M, Vukovic A, Sewell P. (2004). Lightwave Technol. 22: 1923
Lui W.W., Hirono T, Yokoyama K, Huang W.-P., (1998). J. Lightwave Technol. 16: 929
Powell O. (2002). Lightwave Technol. 20: 1851
Soref R.A., Schmidtchen J., Peterman K., (1991). IEEE Quant. Electr. 27: 1971
Sudbø A.S, (1993). Pure Appl. Optics 2, 211
Tsuchizawa T., Yamada K, Fukuda H, Watanabe T, Takahashi J, Takahashi M, Shoji T, Tamechika E, Itabashi S, Morita H., (2005). Select. Topics Quant. Electr. 11, 232
Xu D., Janz S., Cheben P. (2006). Photonics Technol. Lett. 18, 343
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Halir, R., Ortega-Moñux, A., Wangüemert-Pérez, J.G. et al. Fabrication Tolerance Analysis of Bent Single-Mode Rib Waveguides on SOI. Opt Quant Electron 38, 921–932 (2006). https://doi.org/10.1007/s11082-006-9053-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11082-006-9053-5