Skip to main content
SpringerLink
Log in

Assessment of Influence of Flow Diverter on the Metrological Characteristics of Calibration Devices Used for the Units of Mass and Unit of Volume of a Liquid in a Flow and of Mass and Volume Discharges of Liquid

  • MECHANICAL MEASUREMENTS
  • Published:
Measurement Techniques Aims and scope

A new approach to the assessment of interfering factors that arise in the process of diversion of a flow of liquid in the weighing device of a calibration device is presented. The uncertainty budget of the calibration device in reproduction of the unit of mass and unit of volume of liquid in a flow and unit of mass and unit of volume discharge of liquid is considered for this case. The operating principle of the calibration device is based on the method of static weighing. An assessment of the sources of uncertainty is performed by a pneumometric technique, which is itself based on an experimental determination of the local characteristics of the flow of liquid.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.

Similar content being viewed by others

References

  1. I. Marfenko, T. T. Yeh, and J. Wright, “Diverter uncertainty less than 0.01% for water flow calibrations,” in: Proc. 6th Int. Symp. for Fluid Flow, Queretaro, Mexico, May 16–18, 2006.

  2. T. Shimada, S. Oda, Y. Terao, and M. Takamoto, “Development of a new diverter system for liquid flow calibration facilities,” Flow Measur. Instrum., 14, 86–96 (2003).

  3. V. G. Solov’ov, I. I. Fishman, G D. Khomyakov, and A. R. Tukhvatullin, “GET 119–2010 State Primary Special Standard of unit of volume discharge and unit of mass discharge of water,” Mir Izmer., No. 8, 32–35 (2011).

  4. N. I. Kosach, “Estimation of uncertainty of measurements of discharge of liquid performed on standards,” Sist. Obrab. Inform., No. 6 (64), 47–50 (2007).

  5. G. D. Khomyakov, R. A. Korneev, and A. R. Tukhvatullin, “GET 63–2011 State Primary Standard of unit of mass discharge of liquid,” Mir Izmer., No. 10, 48–51 (2012).

  6. V. P. Kargapol’tsev, “Requirements for spilling devices for combined flow meters – counters of water and production liquids,” Neftegaz. Delo, No. 1, 1–6 (2004), http://ogbus.ru.issue/view/issue12004, acc. Jan. 20, 2019.

  7. R. Engel, “Liquid flowmeter characteristics, meter calibration, measurement uncertainty and traceability,” COOMET Comparisons of National Standards for Liquid Flow, PTB, Braunschweig, Germany (2009).

  8. ISO 4185, Measurement of Liquid Flow in Closed Conduits. Weighing Method, registred at VINIKI Gosstandart Rossii, Sept. 29, 2003, 680/ISO.

  9. A. I. Ataeva, A. R. Tukhvatullin, and R. R. Tukhvatullin, “Standards and State Measurement Chains for instruments for measurement of the volume and mass of liquid and volume and mass discharges of liquid. Unifi cation of state measurement chains,” Pribory, No. 12, 34–37 (2016).

  10. V. A. Fafurin, R. A. Korneev, A. R. Tukhvatullin, et al., “Secondary standards of unit of mass discharge and unit of volume discharge (of mass and volume) of liquid travelling through a pipeline,” Avtomat., Telemekh. Svyaz Neft. Prom., No. 7, 3–9 (2013).

  11. D. V. Kratirov, N. I. Mikheev, V. M. Molochnikov, et al., “Radius nozzles for cavitation-free outflow of water at high pressure drops,” Izmer. Tekhn., No. 9, 37–39 (2017).

  12. GOST 8.909–2016, GSI, Secondary Standards of Unit of Mass Discharge and Unit of Volume Discharge and Unit of Mass and Unit of Volume of Liquid. Basic Metrological and Technical Requirements.

  13. I. Sh. Kogan, “Metrological problems related to the concept of mass,” Zakonodat. Prikl. Metrol., No. 2, 37–43 (2013).

  14. A. Shchelchkov, “Thermohydraulic characteristics of discretely rough tubes for the transitional flow regime,” Heat Transf. Res., 47, No. 6, 545–557 (2016).

    Article  Google Scholar 

  15. A. B. Bachurin, A. M. Rusak, E. V. Strel’nikov, and V. A. Tselishchev, “Experimental and theoretical investigations of features of flow in regulated nozzles with central body,” Vest. UGATU, 14, No. 5 (40), 52–61 (2010).

  16. G. N. Abramovich, Applied Gaseodynamics, Nauka, Moscow (1991).

  17. A. Zhukauskas, V. Makaryavichus, and A. Shlanchyauskas, Heat Dissipation in Pipes in Transverse Flow of Liquid, Mintis, Vilnius (1968).

Download references

Author information

Authors and Affiliations

  1. All-Russia Research Institute of Flow Metering (VNIIR), Kazan, Russia

    R. A. Korneev, A. R. Tukhvatullin, V. A. Fafurin & A. V. Shchelchkov

  2. Kazan National Research Technical University (KAI), Kazan, Russia

    A. V. Shchelchkov

Authors
  1. R. A. Korneev
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. R. Tukhvatullin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. A. Fafurin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. V. Shchelchkov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to R. A. Korneev.

Additional information

Translated from Izmeritel’naya Tekhnika, No. 4, pp. 42−47, April, 2019.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Korneev, R.A., Tukhvatullin, A.R., Fafurin, V.A. et al. Assessment of Influence of Flow Diverter on the Metrological Characteristics of Calibration Devices Used for the Units of Mass and Unit of Volume of a Liquid in a Flow and of Mass and Volume Discharges of Liquid. Meas Tech 62, 347–353 (2019). https://doi.org/10.1007/s11018-019-01628-8

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11018-019-01628-8

Keywords

Search

Navigation