It is shown that the addition of 0.01 wt.% of Ti–TiC modifier synthesized by the method of high-voltage electric discharge treatment of Ti powders in kerosene and briquetted with the help of spark plasma sintering makes it possible to reduce the grain size from 1–2 mm to 0.2–0.6 mm in all modified specimens of SM88U heat-resistant alloy. In this case, the tensile strength of modified specimens at a temperature of 900°С is 65–69 MPa and their long-term strength increases, on the average, by 20%.
Similar content being viewed by others
References
K. B. Borodyanskii, M. I. Zinigrad, and L. I. Leont’ev, “Investigation of the modification of alloys by nanomaterials,” Izv. Vyssh. Uchebn. Zaved., Chern. Metallurg., 60, No. 11, 897–903 (2017).
L.-Y. Chen, J.-Q. Xu, and X.-C. Li, “Controlling phase growth during solidification by nanoparticles,” Mater. Res. Lett., 3, No. 1, 43–49 (2015).
I. I. Maksyuta, O. V. Klyass, Yu. G. Kvasnitskaya, G. F. Myal’nitsa, and E. V. Mikhnyan, “Technological characteristics of highchromium nickel alloy complexly alloyed with rhenium and tantalum,” Sovrem. Elektromet., No. 1, 41–48 (2014).
V. V. Skorokhod, Yu. M. Solonin, and I. V. Uvarova, Chemical, Diffusion, and Rheological Processes in the Technology of Powdery Materials [in Russian], Naukova Dumka, Kiev (1990).
O. N. Sizonenko, A. I. Ivliev, and G. A. Baglyuk, Promising Processes of Manufacturing of Powder Materials [in Russian], NUK, Nikolaev (2014).
M. P. Saviak, O. B. Mel’nik, I. V. Uvarova, A. V. Kotko, and O. O. Udovik, “Crystallographic features of nanosized titanium carbide produced from titanium and carbon in a planetary-ball mill,” Powder Metall. Met. Ceram., 55, No. 5–6, 251–258 (2016).
S.-M. Hong, J.-J. Park, E.-K. Park, K.-Y. Kim, J.-G. Lee, M.-K. Lee, C.-K. Rhee, and J. K. Lee, “Fabrication of titanium carbide nanopowders by a very high speed planetary ball milling with a help of process control agents,” Powder Technol., 274, 393-401 (2015).
O. Sizonenko and A. Vovchenko, “Рulsed discharge technologies of processing and obtainment of new materials (Review),” Mach.. Technol. Mater., 8, No. 12, 41–44 (2014).
O. N. Sizonenko, G. A. Baglyuk, A. I. Raichenko, E. I. Taftai, E. V. Lipyan, A. D. Zaichenko, A. S. Torpakov, and E. V. Guseva, “Variation in the particle size of Fe–Ti–B4C powders induced by high-voltage electrical discharge,” Powder Metall. Met. Ceram., 51, No. 3–4, 129–136 (2012).
O. N. Sizonenko, G. A. Baglyuk, A. I. Raichenko, G. P. Bogatyreva, N. A. Oleinik, E. I. Taftai, E. V. Lipyan, and A. S. Torpakov, “Effect of high-voltage discharge on the particle size of hard-alloy powders,” Powder Metall. Met. Ceram., 49, No. 11–12, 630–636 (2011).
E. V. Lipyan, O. N. Sizonenko, A. S. Torpakov, and A. A. Zhdanov, “Thermodynamic analysis of heterogeneous chemical reactions in a ‘mixture of Fe–Ti powders–hydrocarbon liquid’ system under the action of high-voltage electric discharges,” Vestn. “KhPI” Nats. Tekh. Univ., No. 51, 59–65 (2015).
O. N. Sizonenko, А. D. Zaichenko, N. S. Pristash, and А. S. Torpakov, “The influence of the heating rate in the process of sparkplasma sintering on the kinetics of compaction, structure formation, and properties of the materials of Fe–Ti–С–В system,” Mater. Sci., Non-Equilibr. Phase Trans., 2, No. 4, 3–5 (2016).
G. F. Myal’nitsa, L. I. Zhak, and I Sh. Moksheninova, I ZhAKI.105.015-89 System of Quality. Casting of Heat-Resistant Alloys of Vacuum Pouring. Technical Specifications. Acceptance Rules and Methods of Monitoring [in Russian], OGMet NPP “Mashproect,” Nikolaev (2001).
А. S. Torpakov, O. N. Sizonenko, E. M. Sheregii, S. V. Prokhorenko, and E. I. Taftai, “Influence of the composition of working medium on the velocity of front of the pressure wave caused by a high-voltage electric discharge,” Vestn. “KhPI” Nats. Tekh. Univ., No. 14, 97–101 (2016).
А. S. Torpakov, O. N. Sizonenko, and E. I. Taftai,, “Influence of the composition of working medium on the amplitude of the pressure wave caused by a high-voltage electric discharge,” Vestn. “KhPI” Nats. Tekh. Univ., No. 20, 138–148 (2015).
O. Sizonenko, S. Prokhorenko, A. Torpakov, D. Zak, Y. Lypian, R. Wojnarowska-Nowak, J. Polit, and E. Sheregii, “The metalmatrix composites reinforced by the fullerenes,” AIP Adv., 8, No. 8, 085317 (2018).
O. N. Sizonenko, E. G. Grigoryev, A. D. Zaichenko, N. S. Pristash, A. S. Torpakov, Ye. V. Lipyan, V. A. Tregub, A. G. Zholnin, A. V. Yudin, and A. A. Kovalenko, “Plasma methods of obtainment of multifunctional composite materials, dispersion-hardened by nanoparticles,” High Temp. Mat. Proc., 36, No. 9, 891–896 (2017).
Acknowledgment
The authors are deeply grateful to G. P. Myal’nitsya, Deputy Chief of the Department of Metallurgy of the “Zorya–Mashproekt” DP NVKG for his kind help in the realization of our experimental investigations.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 56, No. 2, pp. 88–94, March–April, 2020.
Rights and permissions
About this article
Cite this article
Syzonenko, О.М., Prokhorenko, S.V., Lypyan, E.V. et al. Pulsed Discharge Preparation of a Modifier of Ti–TiC System and its Influence on the Structure and Properties of the Metal. Mater Sci 56, 232–239 (2020). https://doi.org/10.1007/s11003-020-00421-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-020-00421-1